The Makita ML006G 40V Max XGT Cordless LED Flashlight is a high-performance flashlight that offers exceptional brightness and versatility for a wide range of applications. Designed for use with the XGT cordless system, this flashlight delivers outstanding performance and efficiency, making it an ideal choice for construction, industrial, and other demanding environments. With a powerful LED light source, the 40V Max XGT Cordless Flashlight ML006G provides an impressive 900 lumens of brightness, making it one of the brightest cordless flashlights on the market. This makes it ideal for use in low-light conditions, allowing you to work safely and efficiently, even in the darkest environments. It features a rotating head that allows you to adjust the angle of the light beam, so you can easily direct it exactly where you need it. Features & Benefits • 18 extra bright LEDs provides 500 lumens • Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles • Large retractable hook allows user to hang the flashlight from steel pipes up to 50mm • Light head is rotatable with the flashlight hanging down • 3 ode on/off switch delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode • Compact, ergonomic and lightweight design • Rubberized soft grip • Light diffusing lens softens LED light to reduce glare and provides widespread illumination Specifications • LED’s: 18w • Illumination: 500lx • Net Weight: 1.1kg Contents • Makita ML006G 40v Max XGT Cordless LED Flashlight • No Batteries • No Charger • No Case

The DML816 is a portable LED flashlight which can be powered by any Makita 18v LXT power tool battery. The head can be folded up or down with seven positions and can also be rotated left or right to direct the light at the required angle, while an integrated hook can be used to hang the flashlight from available suspension points. There are three brightness modes which deliver either 500, 250 or 100 lumens. Features & Benefits • Eighteen extra bright LEDs • Flashlight head folds up and down with 7 positive stops and rotates left to right • Large retractable hook allows user to hang the flashlight from steel pipes up to 50mm • Three brightness settings • Up to 75 hours of continuous illumination in low mode when used with the BL1860B battery • Up to 34 hours of continuous illumination in medium mode when used with the BL1860B battery • Up to 17 hours of continuous illumination in high mode when used with the BL1860B battery • Compact, ergonomic and lightweight design • Rubberized soft grip • Light diffusing lens softens LED light to reduce glare and provides widespread illumination • Battery capacity warning system Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Brightness Settings: 3 • Maximum Brightness: 500 Lumens • Minimum Brightness: 100 Lumens • Weight (without battery): 0.7kg Contents • DML816 Cordless Flashlight (bare tool) • No Battery • No Charger

The HR007G is a brushless Rotary Hammer, adapted for SDS Plus bits, powered by a 40v Max Li-ion XGT slide type battery. It features variable speed controlled by trigger to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. Features & Benefits • 3 mode operation: Rotation only, Rotation + Hammering, Hammering only • Active Feedback Sensing Technology • Anti vibration housing and AVT • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Brushless motor • Constant speed control • Electric brake • Electric brake • LED job light • Reversing switch • The dust extractor automatically runs while the switch is on • Torque limiter • Trigger lock • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blows per Minute: 0-5,000bpm • Impact Energy: 3.0j • Max. Diameter in Concrete (Diamond Core): 65mm • Max. Diameter in Concrete (TCT Bit): 54mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 32mm • No Load Speed: 0-980rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 105 dB(A) • Noise Sound Pressure: 94 dB(A) • Shank: SDS Plus • Vibration (Chiselling): 8.6m/sec² • Vibration (Drilling into Metal): 2.8m/sec² • Vibration (Hammer Drilling): 7.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.8-4.8kg Contents • HR007G 40v Max XGT Cordless SDS Plus Rotary Hammer Drill • Cloth • Grease vessel • Depth Gauge • Air duct cap • BL4025 40v Max XGT Li-ion 2.5ah Battery (x2) • DC40RA 40v Max XGT Fast Charger • Carry Case

The DUA301 is a Telescopic Pole Saw, with a 300mm length bar, powered by two 18v Li-ion LXT slide type batteries, to supply energy to the powerful brushless 36v motor. It features a soft start for smooth start ups and variable speed controlled by trigger to enable the user to match the speed to the application. The motor is located in the battery housing and so reducing the saw head weight, allowing for easier control of the saw head, reducing user fatigue. The overall length without guide bar of the tool is adjustable from approx 2.6m to 3.8m. Features & Benefits • Captive nuts prevent loss of nut when removing sprocket cover • Chain oil tank with high transparency allows to easily check the amount of oil • Designed to provide high performance similar to 30ml class engine pole saws • Electric brake • Excellent tool balance • High operating efficiency • Integrated branch hook • Retractable oil tank cap decreases the chance that the saw head will snag • Slim saw head • Soft start • Tool less pole extension and fixing • Torque boost mode • Variable speed control Specifications • Battery Voltage: 36v (18v x2) • Battery Type: LXT Lithium Ion • Bar Size: 300mm • Chain Gauge: 0.050" • Chain Oil Capacity: 160ml (cm³) • Chain Pitch: 3/8" • Chain Speed: 0-20m/sec • Noise K Factor: 3 dB(A) • Noise Sound Power: 103 dB(A) • Noise Sound Pressure: 92 dB(A) • Vibration K Factor: 1.5m/sec² • Net Weight: 7.8-8.5kg Contents • DUA301 Cordless Telescopic Pole Saw • Saw Chain • Hex Wrench • Wrench • Band Assembly • Guide Bar • Guide Bar Cover • Round File • Oil Supply • BL1860B 18v Li-ion 6ah Battery (x2) • DC18RD Li-ion 18v Dual Port Charger

The DUA301 is a Telescopic Pole Saw, with a 300mm length bar, powered by two 18v Li-ion LXT slide type batteries, to supply energy to the powerful brushless 36v motor. It features a soft start for smooth start ups and variable speed controlled by trigger to enable the user to match the speed to the application. The motor is located in the battery housing and so reducing the saw head weight, allowing for easier control of the saw head, reducing user fatigue. The overall length without guide bar of the tool is adjustable from approx 2.6m to 3.8m. Features & Benefits • Captive nuts prevent loss of nut when removing sprocket cover • Chain oil tank with high transparency allows to easily check the amount of oil • Designed to provide high performance similar to 30ml class engine pole saws • Electric brake • Excellent tool balance • High operating efficiency • Integrated branch hook • Retractable oil tank cap decreases the chance that the saw head will snag • Slim saw head • Soft start • Tool less pole extension and fixing • Torque boost mode • Variable speed control Specifications • Battery Voltage: 36v (18v x2) • Battery Type: LXT Lithium Ion • Bar Size: 300mm • Chain Gauge: 0.050" • Chain Oil Capacity: 160ml (cm³) • Chain Pitch: 3/8" • Chain Speed: 0-20m/sec • Noise K Factor: 3 dB(A) • Noise Sound Power: 103 dB(A) • Noise Sound Pressure: 92 dB(A) • Vibration K Factor: 1.5m/sec² • Net Weight: 7.8-8.5kg Contents • DUA301 Cordless Telescopic Pole Saw • Saw Chain • Hex Wrench • Wrench • Band Assembly • Guide Bar • Guide Bar Cover • Round File • Oil Supply • BL1850B 18v Li-ion 5ah Battery (x2) • DC18RD Li-ion 18v Dual Port Charger

The UH013G is a lightweight and low noise, brushless Hedge Trimmer powered by a 40v Max Li-ion XGT slide type battery. It features 3 electronic speed control settings for optimum speed control and constant speed control to automatically apply additional power to the motor for constant speed under load. It is equipped with a 600mm single sided blade, with new triple edged cutting teeth, designed to easily catch, firmly hold and sharply cut twigs or thin branches up to a maximum 23.5mm diameter. Specifications • Battery Voltage: 40v Max • Battery Type: Makita XGT Lithium Ion • Blade Length: 600 mm • Blade Type: Single Sided • Max Branch Diameter: 23.5 mm • Noise K Factor: 3 dB(A) • Noise Sound Power: 91 dB(A) • Noise Sound Pressure: 80 dB(A) • Strokes per Minute: 2,000 / 3,600 / 5,000 spm • Vibration (Front grip): 2.5 m/sec² • Vibration (Rear grip): 2.5 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 3.9 - 4.5 kg Features & Benefits • Automatic off function if it is not operated for 60 seconds after being turned on • Brushless motor • Chip receiver • Constant speed control • Curved blades reduce friction resistance to suppress energy loss • Due to the low resistance run time is increased • Electric brake • Ergonomic front handle • Increased cutting speed and torque • IPX4 level water resistant • Lightweight • Lock off switch • Low noise • New triple edged cutting teeth • Reverse button • Two handed start up for user protection • Variable speed control Contents • UH013G XGT Cordless Brushless Hedge Trimmer • Blade Cover • Chip Receiver • BL4025 XGT Li-ion 2.5ah Battery (x2) • DC40RA XGT Fast Charger

The UH014G is a lightweight and low noise, brushless Hedge Trimmer powered by a 40v Max Li-ion XGT slide type battery. It features 3 electronic speed control settings for optimum speed control and constant speed control to automatically apply additional power to the motor for constant speed under load. It is equipped with a 750mm single sided blade, with new triple edged cutting teeth, designed to easily catch, firmly hold and sharply cut twigs or thin branches up to a maximum 23.5mm diameter. Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blade Length: 750mm • Blade Type: Single Sided • Max Branch Diameter: 23.5mm • Noise K Factor: 3 dB(A) • Noise Sound Power: 92 dB(A) • Noise Sound Pressure: 81 dB(A) • Strokes per Minute: 2,000/3,600/5,000 spm • Vibration (Front grip): 3.2m/sec² • Vibration (Rear grip): 2.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 4.0-4.7kg Features & Benefits • Automatic off function if it is not operated for 60 seconds after being turned on • Brushless motor • Chip receiver • Constant speed control • Curved blades reduce friction resistance to suppress energy loss • Due to the low resistance run time is increased • Electric brake • Ergonomic front handle • Increased cutting speed and torque • IPX4 level water resistant • Lightweight • Lock off switch • Low noise • New triple edged cutting teeth • Reverse button • Two handed start up for user protection • Variable speed control Contents • UH014G 40v Max XGT Cordless Brushless Hedge Trimmer • Blade Cover • Chip Receiver • BL4025 40v Max XGT Li-ion 2.5ah Battery (x2) • DC40RA 40v Max XGT Fast Charger

The Makita DFR551 Cordless Brushless Auto Feed Screwdriver is powered by an 18v Li-ion LXT slide type battery, to supply energy to the powerful 18v brushless motor. It features variable speed controlled by a trigger to enable the user to match the speed to the application, to deliver up to 6,000 rpm and enable to drive long drywall screwbits at high speed. It is equipped with lock on button for continuous operation, conveniently located reversing switch and anti restart function to minimise accidental start up. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Drive Shank Hex: 1/4" • No Load Speed: 0 - 6,000 rpm • Noise K Factor: 3 dB(A) • Noise Sound Pressure: 74 dB(A) • Screw Size Range: 25 to 55 mm • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² • Net Weight: 1.9 - 2.2 kg Features & Benefits • Anti restart function • Brushless motor • Ergonomically designed handle with soft grip • Lock on function • One touch casing attachment/removal reduces the trouble of reversing and replacing a bit • Push drive technology • Reversing switch • Screw feeding mechanism redesigned to improve durability and reduce screw fall • Trigger lock • Variable speed control Contents • Makita DFR551 18v LXT Cordless Brushless Auto Feed Screwdriver • Phillips Bit (x2) • Belt Clip • No Batteries • No Charger • No Case

The HR007G is a brushless Rotary Hammer, adapted for SDS Plus bits, powered by a 40v Max Li-ion XGT slide type battery. It features variable speed controlled by trigger to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. Features & Benefits • 3 mode operation: Rotation only, Rotation + Hammering, Hammering only • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti vibration housing and AVT for reduced operator fatigue • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Brushless motor • Constant speed control • Electric brake • Electric brake • LED job light • Reversing switch • The dust extractor automatically runs while the switch is on • Torque limiter • Trigger lock • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blows per Minute: 0-5,000bpm • Impact Energy: 3.0j • Max. Diameter in Concrete (Diamond Core): 65mm • Max. Diameter in Concrete (TCT Bit): 54mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 32mm • No Load Speed: 0-980rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 105 dB(A) • Noise Sound Pressure: 94 dB(A) • Shank: SDS Plus • Vibration (Chiselling): 8.6m/sec² • Vibration (Drilling into Metal): 2.8m/sec² • Vibration (Hammer Drilling): 7.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.8-4.8kg Contents • HR007G 40v Max XGT Cordless SDS Plus Rotary Hammer Drill • Cloth • Grease Vessel • Depth Gauge • Air Duct Cap • No Batteries • No Charger • No Case

The SP001G is a 165mm brushless Plunge Saw, powered by a 40v Max Li-ion XGT slide type battery. It features soft start for smooth start ups, variable speed controlled by dial to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. The SP001G is equipped with easy to set depth adjustments, depth stopper for scuffing to enable the user to cut a preliminary groove at a depth of 2mm and positive stops at the most commonly used bevel angles. It also has dual front and rear bevel supports for increased rigidity for precise and accurate bevel cuts and a locking lever to hold the blade in position so that the wrench can be used through the hole in the blade case. Features & Benefits • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Bevel capacity: 1° to 48° • Brushless motor • Constant speed control • Depth stopper for splinter free cutting • Electric brake • Guide rail (option) is attachable without adapter • Positive stops at commonly used bevel angles (22.5°, 45°) • Rotatable dust nozzle • Soft start • The dust extractor automatically runs while the switch is on • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blade Diameter: 165mm • Bore: 20mm • Max. Cut at 0°: 56mm • Max. Cut at 45°: 40mm • Max. Cut at 48°: 38mm • No Load Speed: 4,900rpm • Noise K Factor: 3 dB(A) • Noise Sound Power/Pressure: 100/89dB(A) • Vibration K Factor: 1.5m/sec² Contents • SP001G Brushless Plunge Saw • Wireless Unit • TCT Saw Blade • Hex Wrench • Tool Bag • No Batteries • No Charger • No Case

The DUA301 is a Telescopic Pole Saw, with a 300mm length bar, powered by two 18v Li-ion LXT slide type batteries, to supply energy to the powerful brushless 36v motor. It features a soft start for smooth start ups and variable speed controlled by trigger to enable the user to match the speed to the application. The motor is located in the battery housing and so reducing the saw head weight, allowing for easier control of the saw head, reducing user fatigue. The overall length without guide bar of the tool is adjustable from approx 2.6m to 3.8m. Features & Benefits • Captive nuts prevent loss of nut when removing sprocket cover • Chain oil tank with high transparency allows to easily check the amount of remaining oil • Designed to provide high performance similar to 30ml class engine pole saws • Electric brake • Excellent tool balance • High operating efficiency • Integrated branch hook • Retractable oil tank cap decreases the chance that the saw head will snag • Slim saw head • Soft start • Tool less pole extension and fixing for easy adjustment of pole length • Torque boost mode • Variable speed control Specifications • Battery Voltage: 36v (18v x2) • Battery Type: Makita LXT Lithium Ion • Bar Size: 300mm • Chain Gauge: 0.050" • Chain Oil Capacity: 160ml (cm³) • Chain Pitch: 3/8" • Chain Speed: 0-20m/sec • Noise K Factor: 3 dB(A) • Noise Sound Power: 103 dB(A) • Noise Sound Pressure: 92 dB(A) • Vibration K Factor: 1.5m/sec² • Net Weight: 7.8-8.5kg Contents • DUA301 Cordless Telescopic Pole Saw • Saw Chain • Hex Wrench • Wrench • Band Assembly • Guide Bar • Guide Bar Cover • Round File • Oil Supply • No Batteries • No Charger

The UH013G is a lightweight and low noise, brushless Hedge Trimmer powered by a 40v Max Li-ion XGT slide type battery. It features 3 electronic speed control settings for optimum speed control and constant speed control to automatically apply additional power to the motor for constant speed under load. It is equipped with a 600mm single sided blade, with new triple edged cutting teeth, designed to easily catch, firmly hold and sharply cut twigs or thin branches up to a maximum 23.5mm diameter. Specifications • Battery Voltage: 40v Max • Battery Type: Makita XGT Lithium Ion • Blade Length: 600 mm • Blade Type: Single Sided • Max Branch Diameter: 23.5 mm • Noise K Factor: 3 dB(A) • Noise Sound Power: 91 dB(A) • Noise Sound Pressure: 80 dB(A) • Strokes per Minute: 2,000 / 3,600 / 5,000 spm • Vibration (Front grip): 2.5 m/sec² • Vibration (Rear grip): 2.5 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 3.9 - 4.5 kg Features & Benefits • Automatic off function if it is not operated for 60 seconds after being turned on • Brushless motor • Chip receiver • Constant speed control • Curved blades reduce friction resistance to suppress energy loss • Due to the low resistance run time is increased • Electric brake • Ergonomic front handle • Increased cutting speed and torque for smooth and efficient cutting • IPX4 level water resistant • Lightweight • Lock off switch • Low noise • New triple edged cutting teeth are designed to easily catch and firmly hold branches • Reverse button • Two handed start up for user protection • Variable speed control Contents • UH013G XGT Cordless Brushless Hedge Trimmer • Blade Cover • Chip Receiver • No Batteries • No Charger