The Makita DUS054 is a shoulder type Cordless Garden Sprayer powered by an 18v LXT Li-Ion battery to deliver up to a maximum pressure of 0.3 MPa. There is a paddle switch under the grip of spray wand which allows for easy on and off control of spraying. Mist mode is for optimal spraying close to plants and stream mode is for optimal watering and fertilizing plants. This garden sprayer features a selectable single and double head spraying. It is also environmentally friendly with no emissions and extremely low noise. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Hose length: 1.7m • Max Pressure: 0.3 MPa • Nozzle Mounting Thread: G 1/4 • Spray Wand Length: 0.5-0.7 m • Tank Capacity: 5L Features & Benefits • 3-LED fuel gauge • Environment friendly with no emission and extremely low noise • Ergonomically optimized tank design • H-shaped double head nozzle • IP54 (dust and splash water) rated protection • Lock on function • Mist and Stream modes selectable • Paddle switch under the grip of spray wand allows for easy on/off control of spraying • Single/double head spraying selectable • Telescopic spray wand Contents • Makita DUS054Z 18v LXT Cordless Garden Sprayer • H-Shaped Double Head Nozzle • Spray Wand • Spray Wand Holder • Shoulder Belt • No Batteries • No Charger

The Makita MP001G is a Cordless Inflator powered by a 40v Max XGT Li-Ion battery. Delivers up to 1,100 kPa (161 PSI) maximum air pressure and 24 litres of air discharge per minute at 200 kPa, 12 litres per minute at 700 kPa and 7 litres per minute at 1,100 kPa. The high speed mode is suitable for Road Bikes, Cars, Trucks and Tractors. Equipped with a 65cm hose and also features a main switch with an auto power off and trigger switch. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Air Discharge Amount (at 1,100 kPa): 7 litres/min • Air Discharge Amount (at 700 kPa): 12 litres/min • Air Discharge Amount (at 200 kPa): 24 litres/min • Hose Length: 65cm • Max Air Pressure: 1,110 kPa • Noise K Factor: 3 dB(A) • Noise Sound Pressure: 71 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 3.8 m/sec² Features & Benefits • 3x inflation modes • Adapter holder • Air release function • Auto-stop function at pre-set target pressure • Digital pressure gauge • Easy-to-grip handle • High speed mode is suitable for Road Bike, Car, Truck, Tractor • LED job light • Main switch (On/off) • Protection from over-heating • Trigger switch Contents • Makita MP001G 40v Max XGT Cordless Inflator • British Adaptor • French Adaptor • Sport Ball Needle Adaptor • Swim Ring Adaptor • No Batteries • No Charger • No Case

The Makita LS004G is a 260mm Cordless Brushless Slide Compound Mitre Saw powered by a 40v Max XGT Li-Ion battery. This mitre saw features a soft start for smooth start-ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load, to deliver up to 3,600 rpm. It is equipped with a D-handle for increased comfort in use, lock off 2 stage safety switch for increased operator safety and front knob for easy bevel angle adjustments. Additionally the LS004G has holders on both sides of the Saw to hold longer workpieces horizontally and a one touch sliding lock for locking the sliding movement of the carriage and a see through blade guard for increased visibility of the cutting line. Features & Benefits • Auto-Start Wireless System • Brushless motor • Constant speed control • Easy locking and release of bevel angle • Electric brake • Large turn base • LED job light • One-touch sliding lock • Rail-forward design • Soft start • Switch to start up dust extractor Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Blade Diameter: 260mm • Bore Diameter: 30mm • Max Bevel Range: 48-48° • Max Cutting Capacity: 68 x 310mm • Max Mitre Range: 60-60° • No Load Speed: 3,600 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 100 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² Contents • Makita LS004G 40v Max XGT Brushless Slide Compound Mitre Saw • TCT Saw Blade • Dust Bag • Hex Wrench • Vertical Vice • Accessory set • Wireless Unit • No Batteries • No Charger

The Makita DTW302 is a Cordless Brushless 3/8" Drive Impact Wrench powered by an 18v LXT Li-Ion battery. The variable speed mode can be changed to full speed mode simply by pushing a button. In full speed mode the trigger travel is shorter and the full speed is reached faster. Auto-stop system available both in forward/reverse rotation modes. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Driving Shank: 3/8" Square, C-ring • High Tensile Bolt: M10-M16 • Max Fastening Torque: 300 Nm • Nut Busting Torque: 500 Nm • Standard Bolt: M10-M20 • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000 rpm • Blows per Minute (Max): 0-4,000 ipm • Blows per Minute (Hi): 0-3,400 ipm • Blows per Minute (Med): 0-2,600 ipm • Blows per Minute (Lo): 0-1,800 ipm • Noise K factor: 3 dB(A) • Noise sound power: 105 dB(A) • Noise sound pressure: 94 dB(A) • Vibration K Factor: 2.4 m/sec² • Vibration (Fastening Bolt): 15.4 m/sec² Features & Benefits • Auto-stop system • Brushless motor • Compact design with a short overall length of 138mm • Electric brake • Electronic 4 stage impact power selection • Ergonomically designed loop handle with rubberised soft grip • Forward / reverse rotation • LED job light • Trigger switch with full speed mode • Variable speed control by trigger Contents • Makita DTW302Z 18v LXT Cordless Brushless 3/8" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

The Makita DTD157 is a Cordless Brushless Impact Driver powered by an 18v LXT Li-Ion battery. It features a variable speed controlled by trigger, to deliver up to 3,000 rpm, 4,100 ipm and 140 Nm maximum tightening torque, suitable for a wide range of fastening applications. It has a compact body for easy screwdriving in confined areas and is equipped with a convenient 1/4” hex driving shank for quick and easy bit installations and removals. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Coarse Thread (Length): 22-90mm • Driving Shank: 6.35mm 1/4" Hex • High Tensile Bolt: M5-M12 • Machine Screw: M4-M8 • Max Fastening Torque: 140 Nm • Standard Bolt: M5-M14 • Blows per Minute (Hi): 0-4,100 ipm • Blows per Minute (Lo): 0-2,000 ipm • No Load Speed (Hi): 0-3,000 rpm • No Load Speed (Lo): 0-1,300 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 106 dB(A) • Noise Sound Pressure: 95 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Fastening Bolt): 11.5 m/sec² Features & Benefits • Aluminium hammer case • Anti bit wobbling structure • Assist mode for controlled screwdriving • Belt clip • Brushless Motor • Electric brake • Electronic 2 speed impact power selection • Ergonomically designed high comfort grip • Forward / reverse rotation • LED job light • Variable speed control by trigger Contents • Makita DTD157 18v LXT Cordless Brushless Impact Driver • Belt Clip • No Batteries • No Charger • No Case

The Makita DMP181 is a Cordless Inflator powered by an 18v LXT Li-Ion battery. It delivers up to 1,100 kPa, 161 PSI maximum air pressure and 22 litres per minute at 200 kPa, 11 litres at 700 kPa and 7 litres at 1,100 kPa air discharge. It is ideal for inflating tyres of cars, bicycles, sports balls and more and is equipped with main power switch with auto power off to minimise accidental start-up during transporting. This inflator features a trigger switch, 3 inflation modes for high speed, low speed and ball mode, digital pressure gauge, easy to grip handle for user convenience and a LED job light for easier operation in poor light conditions. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Air Discharge Amount (at 1,100 kPa): 7 litres/min • Air Discharge Amount (at 700 kPa): 11 litres/min • Air Discharge Amount (at 200 kPa): 22 litres/min • Hose Length: 65cm • Max Air Pressure: 1,110 kPa • Noise K Factor: 3 dB(A) • Noise Sound Pressure: 70 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 3.6 m/sec² Features & Benefits • 3x inflation modes • Adapter holder • Auto stop function at pre set target pressure • Digital pressure gauge • Easy to grip handle • LED job light • Main switch (On/off) • Protection from over heating • Suitable for Road Bike, Car, Truck, Tractor • Trigger switch Contents • Makita DMP181Z 18v LXT Cordless Inflator • British Adaptor • French Adaptor • Swim Ring Adaptor • Sport Ball Needle Adaptor • No Batteries • No Charger • No Case

The Makita DHP487 is a Cordless Brushless Combi Drill powered by an 18v LXT Li-Ion battery. It features variable speed control for a wide range of drilling, fastening and hammer drilling applications. The high speed mode is for speedy drilling in light duty applications and low speed mode is for heavy duty applications requiring high torque. It has a single sleeve keyless chuck for easy bit installations and removals with 20 torque settings plus drill mode for added fastening control. The electric brake is for operator safety and twin LED job lights are to illuminate the work area. Features and Benefits • 2 mechanical gears • Belt clip • Best possible ergonomic handle • Brushless motor • Electric brake • Forward / reverse rotation • LED job light • Single sleeve keyless chuck • Variable speed control Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Chuck Capacity: 1.5-13 mm • Max. Diameter in Masonry: 13mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 36mm • Max. Fastening Torque (Hard Joint): 40 Nm • Max. Fastening Torque (Soft Joint): 25 Nm • Torque Settings: 20 + Drill • Blows per Minute (Hi): 0-25,500 ipm • Blows per Minute (Lo): 0-7,500 ipm • No Load Speed (Hi): 0-1,700 rpm • No Load Speed (Lo): 0-500 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 94 dB(A) • Noise Sound Pressure: 83 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Drilling into metal): 2.5 m/sec² • Vibration (Impact drilling into concrete): 10.5 m/sec² Contents • Makita DHP487 18v LXT Cordless Brushless Combi Drill • Screwdriver Bit • Belt Clip • No Batteries • No Charger • No Case

The Makita DHP486 is a Cordless Brushless Combi Drill powered by an 18v LXT Li-Ion battery. It features variable speed control to deliver up to 2,100 rpm, 31,500 bpm and 130 Nm maximum fastening torque for a wide range of drilling, fastening and hammer drilling applications. It is equipped with mechanical 2 speed control, 21 torque settings plus drill mode for added fastening control, forward and reverse rotation, LED job light for increased visibility of the working area and all metal gear construction and gear housing for increased durability. It is also fitted with a 13mm single sleeve keyless chuck for quick and easy bit installations and removals and electric brake for increased operator safety. Features & Benefits • 2 mechanical gears • All metal gear construction • Belt clip • Ergonomic handle • Brushless motor • Electric brake • Forward/reverse rotation • LED job light • Metal gear housing • Single sleeve keyless chuck • Variable speed control Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Chuck Capacity: 1.5-13mm • Max. Diameter in Masonry: 16mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 76mm • Max. Fastening Torque (Soft/Hard Joint): 65/130Nm • Torque Settings: 21+Drill • Blows per Minute (Lo/Hi): 8,250/31,500ipm • No Load Speed (Lo/Hi): 550/2,100rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K Factor: 1.5m/sec² • Vibration (Drilling into metal): 2.5m/sec² • Vibration (Impact drilling into concrete): 8.0m/sec² Contents • DHP486 18v LXT Brushless Combi Drill • Depth Stop • Side Handle • Screwdriver Bit • Belt Clip • No Batteries • No Charger • No Case