The DC40RB is a 110V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (not included) to charge 14.4V and 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience and features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery and the other for the charging circuit and electronic current limiter for overload protection. Specifications • 45 minutes to charge BL4040 40V Max 4.0 Ah • 28 minutes to charge BL4025 40V Max 2.5 Ah • 22 minutes to charge BL1830B • 29 minutes to charge BL1840B • 35 minutes to charge BL1850B • 50 minutes to charge BL1860B Features & Benefits • Twin port fast charger for charging battery ranges from 14.4V LXT to 40V Max XGT • Able to charge two Makita 40V Max Li-ion XGT batteries at the same time • Equipped with two cooling fans, one for battery and other for charging circuit • Able to perform consecutive fast charges of batteries for increased convenience • Large charging status indicator light • Electronic current limiter for overload protection

The DC40RA is a fast charger for Makita 40v Max XGT Lithium ion power tool batteries. It is equipped with two cooling fans, one for the battery and the other for the charging circuit, enabling it to charge consecutive batteries at the optimum charge time. The DC40RA can also be used to charge Makta's 18v LXT lithium ion batteries if used with the ADP10 adaptor (not included). The DC40RA will fully recharge a 2.5ah 40v battery in approximately 28 minutes and will fully recharge a 4.0ah 40v battery in approximately 45 minutes. Features & Benefits • Fast charger for Makita 40v Max XGT lithium ion power tool batteries • New raised and enlarged charging indicator status light for clearer indication • Selectable melody sound for full charge notification • Two cooling fans, one for the battery and one for the charging circuit • Able to perform consecutive fast charging of batteries • Compatible with interchangeable adaptor ADP10 for charging LXT Li-ion batteries

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 240v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 240v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 110v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 110v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The Makita SK700GD is a Cordless Green Multi Line Laser powered by a 12v Max CXT Li-Ion battery. This has a green laser line for increased visibility in brighter environments. The rotary base with eccentric rotation mechanism reduces setup time and the vertical laser lines can rotate around the defined plumb point up to 10° left and right (with a dial for fine adjustment). The eccentric rotation mechanism enables the laser body to rotate without changing the position of the defined plumb point, enabling easy line positioning. Specifications • Battery Voltage: 12v • Battery Type: CXT Li-ion • Accuracy: +/-2mm / 10m • Beam Direction/Fan Angle: 2x Vertical 360°, 1x Horizontal 360° • Laser Colour: Green • Light Output Power:

The Makita UR012G is a Cordless Brushless Brush Cutter powered by two 40v XGT Li-ion batteries in series. Features a soft start for smooth start-ups, with variable speed control and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with electronic 3 speed settings, plus ADT mode, for high, medium and low to allow the operator to match the speed to the application. This brush cutter additionally features an electric brake for increased operator safety and electronic current limiter for overload protection. A reverse switch is used for the easy removal of grass clippings and tangled weeds and a rear end mounted motor is for optimum tool balance. Features & Benefits • Automatic Torque Drive Technology • Compatible with a variety of blades • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter • IPX4 level water resistant • Low noise level for comfortable working • Offset bike handle • Reverse switch for removing grass clippings • Soft start • Variable speed control function Specifications • Battery Voltage: 80v (40v x2) • Battery Type: XGT Li-ion • Cutting Diameter: 480mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 6,400 rpm • No Load Speed (Med): 5,000 rpm • No Load Speed (Lo): 3,500 rpm • Noise K Factor: 1.8 dB(A) • Noise Sound Power: 91.6 dB(A) • Noise Sound Pressure: 79.9 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Nylon Cutting Head): 2.5 m/sec² Contents • Makita UR012GZ04 Twin 40v Max XGT Cordless Brushless Brush Cutter • Nylon cutting head • Hex wrench (x2) • Box wrench • Shoulder belt • Accessory bag • No Batteries • No Charger

The Makita UR008G is a Cordless Brushless Linetrimmer powered by a 40v Max XGT Li-ion battery. Features a soft start for smooth start-ups, with variable speed control to allow the operator to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with a rear end mounted motor for enhanced tool balance and reverse switch for easy removal of tangled weeds and grass cuttings. Additionally, it has a narrow protector designed exclusively for use with nylon cutting head and plastic blade. An electronic current limiter is used for overload protection and electric brake for increased operator safety. Features & Benefits • Active Feedback Sensing Technology • Automatic Torque Drive Technology • Brushless motor • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter • Ergonomically designed loop handle with rubberised soft grip • High power similar to 30cc class engine grass trimmers • IPX4 level water resistant • Narrow protector • Reverse switch • Soft start feature • Variable speed control function Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Cutting Diameter: 430mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 6,000 rpm • No Load Speed (Med): 4,600 rpm • No Load Speed (Lo): 4,000 rpm • Noise K factor: 1.6 dB(A) • Noise Sound Power: 91.9 dB(A) • Noise Sound Pressure: 79.0 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² Contents • Makita UR008G 40v Max XGT Brushless Linetrimmer • Nylon Cutting Head • Accessory Bag • Hex Wrench • Shoulder Belt • No Batteries • No Charger

The Makita UR006G is a Cordless Brushless Brush Cutter powered by a 40v Max XGT Li-ion battery. Features a soft start for smooth start-ups, with variable speed control to allow the operator to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with a rear end mounted motor for enhanced tool balance and reverse switch for easy removal of tangled weeds and grass cuttings. Additionally, it has a tool less quick fastening handle holder, electronic current limiter, used for overload protection, and an electric brake for increased operator safety. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Cutting Diameter: 430mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 7,000 rpm • No Load Speed (Med): 5,500 rpm • No Load Speed (Lo): 4,600 rpm • Noise K Factor: 1.6 dB(A) • Noise Sound Power: 92.7 dB(A) • Noise Sound Pressure: 81.7 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Nylon Cutting Head): 2.5 m/sec² Features & Benefits • Active Feedback Sensing Technology (AFT) • Automatic Torque Drive Technology • Brushless motor • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter for overload protection • IPX4 level water resistant • New tool-less quick fastening handle holder • Offset bike handle • Reverse switch for easy removal of grass clippings stuck • Soft start feature • Variable speed control Contents • Makita UR006G 40v Max XGT Brushless Brush Cutter • Nylon Cutting Head • Accessory Bag • Hex Wrench • Box Wrench • Shoulder Belt • No Batteries • No Charger