The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 240v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 240v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The DC40RA is a fast charger for Makita 40v Max XGT Lithium ion power tool batteries. It is equipped with two cooling fans, one for the battery and the other for the charging circuit, enabling it to charge consecutive batteries at the optimum charge time. The DC40RA can also be used to charge Makta's 18v LXT lithium ion batteries if used with the ADP10 adaptor (not included). The DC40RA will fully recharge a 2.5ah 40v battery in approximately 28 minutes and will fully recharge a 4.0ah 40v battery in approximately 45 minutes. Features & Benefits • Fast charger for Makita 40v Max XGT lithium ion power tool batteries • New raised and enlarged charging indicator status light for clearer indication • Selectable melody sound for full charge notification • Two cooling fans, one for the battery and one for the charging circuit • Able to perform consecutive fast charging of batteries • Compatible with interchangeable adaptor ADP10 for charging LXT Li-ion batteries

The DC40RB is a 110V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (not included) to charge 14.4V and 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience and features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery and the other for the charging circuit and electronic current limiter for overload protection. Specifications • 45 minutes to charge BL4040 40V Max 4.0 Ah • 28 minutes to charge BL4025 40V Max 2.5 Ah • 22 minutes to charge BL1830B • 29 minutes to charge BL1840B • 35 minutes to charge BL1850B • 50 minutes to charge BL1860B Features & Benefits • Twin port fast charger for charging battery ranges from 14.4V LXT to 40V Max XGT • Able to charge two Makita 40V Max Li-ion XGT batteries at the same time • Equipped with two cooling fans, one for battery and other for charging circuit • Able to perform consecutive fast charges of batteries for increased convenience • Large charging status indicator light • Electronic current limiter for overload protection

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 110v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 110v

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 240v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5Ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 240v

The Makita USB Battery Adaptor For XGT 40v Batteries features two Type A (DC5V/2.1A) USB output ports and a LED indicator which turns green while the switch is on so the user can easily see when a device is charging. Features & Benefits • Auto off function • Capable of charging mobile devices such as smartphones and tablets • Features a belt clip • LED charging indicator • On/Off push button switch

The Makita ML003G 40v Max XGT Cordless Led Worklight is equipped with 20 high intensity LED’s for a wider range. These LED lights effectively illuminate the work area without the high heat of halogen bulbs. Supplies 1,100 lumens on high mode or 450 lumens on low mode, with adjustable knobs to enable the user to direct the work light to the desired angle and integral handle that can also be used as a hanging hook. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Illumination H/L: 1,100 / 450 lumens • Length: 249mm • Width: 298mm • Height: 386mm Features & Benefits • 2 mode operation: delivers 1,100 lumens on High mode or 450 lumens on Low mode • 20 High Intensity LED lights for a wider range • Can be mounted on optional tripod light stand – GM00002073 (not included) • Integrated handle can be used as a hanging hook • IP65 rated for maximum weather and water resistance • Light will flash to alert user when battery charge is low • Lightweight • Up to 10 hours of continuous illumination with a 4.0ah 40v XGT battery on High mode Contents • Makita ML003G 40v Max XGT Cordless Led Worklight • No Batteries • No Charger • No Case

The Makita DML814 is a cordless tower worklight which can deliver a beam of up to 3000 lumens for lighting up the darkest jobsites. It uses three independent LED lights which can be pivoted to cover a wider area. It will run on any Makita 18v LXT or 14.4v lithium ion power tool battery and is IP55 certified for resistance to dust and outdoor weather conditions. The tripod base has a lock-release button which makes it quick and easy to set up and pack away, and for maximum stability it can be fixed to the ground with screws or pegs if required. The battery can also be padlocked to the unit (padlock not included) to prevent theft. A shoulder strap is included for comfortably transporting the light between locations. Features & Benefits • 12 LED Worklight • The light head consists of 3 small light heads, each of them can be pivoted independently • Three brightness settings • Memory function remembers the last brightness setting after the light is powered off • LED colour is daylight white - emulating natural light and ideal for working spaces • Highly stable tripod base which is expandable/foldable simply by sliding the carrying handle • Telescopic light mast enables lighting at a height up to 2.2 m • Light height is adjustable from 125-224 cm • IP55 certified weather and dust resistance • Padlock hole for battery theft protection • Battery capacity warning function • Foldable into a compact size for simple storage and transport Specifications • Battery Voltage: 14.4v / 18v • Battery Type: Makita Lithium Ion • Brightness Settings: 3 • Min/Max Brightness: 900/3000 lumens • Height: 1250mm - 2240mm • Weight: 7.4kg - 8.1kg (depending on battery) Contents • DML814 Cordless Worklight (bare tool) • Shoulder Strap • No Battery • No Charger

The Makita GM00002286 Light Diffuser diffuses the light and reduces glare on the DML809 LED Worklight (sold separately). By diffusing the light, it expands the lighted area, while making the light less harsh. The diffuser is manufactured with high-quality materials for durability and longer service life. It is easy and quick to install. Features & Benefits • Diffuses the light and reduces glare • Expands the lighted area by diffusing the light • Made from durable polycarbonate • Easy to attach design

The Makita GM00002287 Light Diffuser diffuses the light and reduces glare on the DML811 LED Worklight (sold separately). By diffusing the light, it expands the lighted area, while making the light less harsh. The diffuser is manufactured with high-quality materials for durability and longer service life. It is easy and quick to install. Features & Benefits • Diffuses the light and reduces glare • Expands the lighted area by diffusing the light • Made from durable polycarbonate • Easy to attach design

The DKP181 inlay is precisely designed to fit Makita power tools, ensuring a snug and secure fit. With each tool having its designated spot, you can quickly access the equipment you need, saving valuable time on the job site. The inlay acts as a protective barrier, preventing your tools from scratching or colliding with each other during transport or storage. Made by Makita, a trusted name in power tools, the DKP181 inlay is built to last. It can withstand the rigors of construction sites and daily use. Specifically designed for use with Makita MakPac Power Tool Cases, ensuring a seamless fit and functionality. Specifications • Manufacturer Code: 835E27-9 • Type: 3 • Quantity: 1

Crafted specifically for Makpac cases, the Type 3 Inlay offers precision-molded compartments that keep your tools and accessories neatly in place, preventing damage and making transportation effortless. Its durable construction guarantees long-lasting use, while its lightweight design adds no unnecessary bulk to your Makpac case. Features & Benefits • Fits 1 DC18RD and 4 x 18v batteries • Suitable for Type 3 connector case