The HR3001CJ is a corded electric SDS Plus rotary hammer with drastically increased drilling efficiency thanks to a redesigned hammering mechanism. It has three modes, constant speed control and a "no hammering when idle" function which helps to suppress vibration and prolong the service life of the tool. Features & Benefits • Suitable for SDS-Plus drill bits and chisels • Double Insulation • Variable speed • Forward / reverse rotation • Torque limiter • Constant speed control • 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" • Drilling efficiency drastically increased by redesigned hammering mechanism • "No hammering when idling" function helps increase tool life • Anti-vibration main handle • Depth gauge Specifications • Voltage: 110v • Shank: SDS Plus • Modes: 3 • Impact energy: 3.9 J • Max in concrete (TCT bit): 30 mm • Max in concrete (TCT core): 80 mm • Max in concrete (Diamond core): 80 mm • Max in wood: 32 mm • Max in steel: 13 mm • Impacts per minute: 0 - 4500 ipm • No Load Speed0 - 840 rpm • Input Wattage: 1050 w • Vibration K factor: 1.5 m/sec² • Vibration (Chiselling): 11.0 m/sec² • Vibration (Hammer Drilling): 13.5 m/sec² • Vibration (Drilling into metal): 6.0 m/sec² • Noise sound pressure: 94 dB(A) • Noise K factor: 3 dB(A) • Noise sound power: 105 dB(A) • Net weight: 4.1- 4.5 kg Contents • HR3001CJ/1 SDS Plus Rotary Hammer Drill 110v • Type 4 Makpac Connector Case • Depth stop • Side handle

The HR3001CJ is a corded electric SDS Plus rotary hammer with drastically increased drilling efficiency thanks to a redesigned hammering mechanism. It has three modes, constant speed control and a "no hammering when idle" function which helps to suppress vibration and prolong the service life of the tool. Features & Benefits • Suitable for SDS-Plus drill bits and chisels • Double Insulation • Variable speed • Forward / reverse rotation • Torque limiter • Constant speed control • 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" • Drilling efficiency drastically increased by redesigned hammering mechanism • "No hammering when idling" function helps increase tool life • Anti-vibration main handle • Depth Gauge Specifications • Voltage: 240v • Shank: SDS Plus • Modes: 3 • Impact energy: 3.9 J • Max in concrete (TCT bit): 30 mm • Max in concrete (TCT core): 80 mm • Max in concrete (Diamond core): 80 mm • Max in wood: 32 mm • Max in steel: 13 mm • Impacts per minute: 0 - 4500 ipm • No Load Speed0 - 840 rpm • Input Wattage: 1050 w • Vibration K factor: 1.5 m/sec² • Vibration (Chiselling): 11.0 m/sec² • Vibration (Hammer Drilling): 13.5 m/sec² • Vibration (Drilling into metal): 6.0 m/sec² • Noise sound pressure: 94 dB(A) • Noise K factor: 3 dB(A) • Noise sound power: 105 dB(A) • Net weight: 4.1- 4.5 kg Contents • HR3001CJ/2 SDS Plus Rotary Hammer Drill 240v • Type 4 Makpac Connector Case • Depth stop • Side handle

The Makita HR3012FCJ SDS Plus Rotary Hammer Drill is a high-performance tool designed for demanding drilling and chiselling tasks. Powered by a 1050w motor, it delivers exceptional power and efficiency, making it ideal for tackling concrete, brick, and stone projects. The SDS Plus chuck system ensures quick and secure bit changes, enhancing productivity on the job site. Featuring three operation modes—rotation only, hammering with rotation, and hammering only—the HR3012FCJ offers versatility for various applications. The variable speed control and torque limiter provide optimal control and prevent motor overload, ensuring safety and durability. The built-in vibration control system minimises user fatigue, allowing for comfortable use during extended periods. The integrated LED light illuminates the work area, ensuring precision in low-light conditions. Its ergonomic design, complete with a soft grip handle, enhances comfort and control. Features & Benefits • Impact drilling, non-impact drilling and spike function • Rubber coating on handle ensures a firm working grip • LED light illuminates the work area • Anti-vibration technology ensures extra low vibration performance • Quick-change chuck for quick changeover to wood and metal drill bits Specifications • Voltage: 110v • Continuous Input Power: 1050w • No Load Speed: 0-840min • Impacts Per Min: 0-4500min • Max Drilling Dia in Wood: 32mm • Max Drilling Dia in Concrete: 32mm • Max Drilling Dia in Steel: 13mm • Optimum Drilling Dia in Range in Concrete: 8-16mm • Drilling Dia with TCT Core Bit: 80mm • Impact Energy: 3.9J • Power Supply Cord: 2.5m Contents • Makita HR3012FCJ SDS Plus Rotary Hammer Drill • Drill Chuck Set • Depth Gauge • Band • Makpac Case Type 4 • Makpac Inner Tray

The Makita HR3012FCJ SDS Plus Rotary Hammer Drill is a high-performance tool designed for demanding drilling and chiselling tasks. Powered by a 1050w motor, it delivers exceptional power and efficiency, making it ideal for tackling concrete, brick, and stone projects. The SDS Plus chuck system ensures quick and secure bit changes, enhancing productivity on the job site. Featuring three operation modes—rotation only, hammering with rotation, and hammering only—the HR3012FCJ offers versatility for various applications. The variable speed control and torque limiter provide optimal control and prevent motor overload, ensuring safety and durability. The built-in vibration control system minimises user fatigue, allowing for comfortable use during extended periods. The integrated LED light illuminates the work area, ensuring precision in low-light conditions. Its ergonomic design, complete with a soft grip handle, enhances comfort and control. Features & Benefits • Impact drilling, non-impact drilling and spike function • Rubber coating on handle ensures a firm working grip • LED light illuminates the work area • Anti-vibration technology ensures extra low vibration performance • Quick-change chuck for quick changeover to wood and metal drill bits Specifications • Voltage: 240v • Continuous Input Power: 1050w • No Load Speed: 0-840min • Impacts Per Min: 0-4500min • Max Drilling Dia in Wood: 32mm • Max Drilling Dia in Concrete: 32mm • Max Drilling Dia in Steel: 13mm • Optimum Drilling Dia in Range in Concrete: 8-16mm • Drilling Dia with TCT Core Bit: 80mm • Impact Energy: 3.9J • Power Supply Cord: 2.5m Contents • Makita HR3012FCJ SDS Plus Rotary Hammer Drill • Drill Chuck Set • Depth Gauge • Band • Makpac Case Type 4 • Makpac Inner Tray

The MR001GZ01 is a job site radio which can be powered via an AC adaptor or from one of Makita's XGT, LXT or CXT power tool batteries. It can run for up to 30 hours with a 40v 4.0ah XGT battery installed. Specifications • Battery Range: 12 - 40 v • Frequency Range FM: 87.5 - 108 Mhz • Frequency Range AM: 522 - 1710 kHz • Speakers 2x 89mm • Practical Output (12v)1.2W x2 • Practical Output (14.4v)2.2W x2 • Practical Output (18v)3.5W x2 • Practical Output (40v)5.0W x2 • Net weight 4.3 – 5.3 kg Features and Benefits • Compatible with XGT, LXT and CXT batteries • AC adaptor jack • Carry handle with built-in FM antenna • IP65 rated dust and shower-proof construction • Dual speaker stereo system • Runs up to 30 hours with an 40Vmax XGT Li-ion 4.0 Ah battery • Elastomer bumpers and metal pipes protect against rough handling • AUX-IN jack • Digital AM / FM Tuner with LCD Backlit Display • Illuminated control buttons and dial for improved visibility • Adjustable sleep (auto shut off) timer Contents • MR001GZ01 Job Site Radio • AC Power Adaptor • No Battery • No Charger

The MR002GZ01 is a white edition, dual powered Job Site Radio with Bluetooth, compatible with Makita 10.8v and 12v Max CXT, 14.4v and 18v LXT and 40v Max XGT slide type batteries or AC adapter, featuring Bluetooth Class 2 to wirelessly connect your mobile device to play music with a range of up to 10 metres. It is equipped with USB output port for charging mobile devices, 2 side-firing speaker stereo system, AUX-IN jack for connecting to external audio source, digital AM/FM Tuner with LCD backlit display, with 10 pre-set channels, adjustable sleep timer and menu controls to set FM mono and stereo, clock settings, volume and snooze. Features & Benefits • Equipped with Bluetooth class 2 to wirelessly connect your mobile device for playing music with a range up to 10m • USB output port allows for charging mobile devices • Compatible with XGT, LXT and CXT batteries • AC adaptor jack • Carry handle with built-in FM antenna • IP65 rated dust and shower-proof construction • 2x speaker stereo system • Runs up to 27.5 hours with an 40v Max XGT Li-ion 4.0ah battery • Elastomer bumpers and metal pipes protect against rough handling • AUX-IN jack • Digital AM / FM Tuner with LCD Backlit Display • Illuminated control buttons and dial for improved visibility • Adjustable sleep (auto shut off) timer Specifications • Battery Range: 12-40v • Battery Type: Lithium-ion • Frequency Range AM: 522-1710kHz • Frequency Range FM: 87.5-108Mhz • Practical Output (12v): 1.2W x2 • Practical Output (14.4v): 2.2W x2 • Practical Output (18v): 3.5W x2 • Practical Output (40v): 5.0W x2 • Speakers: 89mm x2 • Net Weight: 4.3-5.3kg Contents • MR002GZ01 40v XGT Job Site Radio • AC Power Adaptor • No Batteries • No Charger • No Case

The MR003G is a job site radio that is able to receive Digital Audio Broadcasting (DAB/ DAB+) stations. It can be powered via an AC adaptor or by one of Makita's XGT, LXT or CXT batteries. It can run for up to 34 hours with a fully charged 40v XGT 4.0ah battery installed. Specifications • Battery Range: 12 - 40 v • Frequency Range FM: 87.5 - 108 Mhz • Speakers 2x 89mm • Practical Output (12v): 1.7W x2 • Practical Output (14.4v): 3.0W x2 • Practical Output (18v): 4.9W x2 • Practical Output (40v): 4.9W x2 • Frequency Range DAB: Band III 5A – 13F • Net weight 4.2– 5.2 kg Features and Benefits • Capable of receiving DAB/DAB+ Radio Stations • Equipped with Micro USB port for software upgrade • Compatible with XGT, LXT and CXT batteries • AC adaptor jack • Carry handle with built-in FM antenna • IP65 rated dust and shower-proof construction • Dual speaker stereo system • Runs for up to 34 hours on a 40Vmax XGT Li-ion 4.0 Ah battery • Elastomer bumpers and metal pipes protect against rough handling • AUX-IN jack • Easy-to-read digital tuner with LCD display • Illuminated control buttons and dial for improved visibility Contents • MR003GZ01 Job Site Radio • AC Power Adaptor • No Battery • No Charger

Part of the 12v CXT cordless platform, the PV301D is a compact sander and polisher which can run on any Makita 12v CXT battery. It has a brushless motor and two speed settings, with variable speed control and a lock on switch. The tool is restart protected so it won't start up unexpectedly if the switch is left in the "on" position while changing over a battery. Features & Benefits • Variable speed control • Mechanical 2-speed control • Constant speed control • Brushless motor • Trigger lock • Lock-on switch to reduce user fatigue • Anti-restart function • Ergonomic soft grip Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Pad/Disc Diameter (Hook & Loop type): 80 mm • Pad/Disc Diameter (Twist on/off type): 50 mm • Backing Pad Diameter (Hook & Loop type): 75 mm • Backing Pad Diameter (Twist on/off type): 46 mm • No Load Speed (Sanding): 0 - 9500 rpm • No Load Speed (Polishing): 0 - 2800 rpm • Vibration K factor: 1.5 m/sec² • Vibration: Sanding: 2.5 m/sec² • Noise sound pressure: 73 dB(A) • Noise K factor: 3 dB(A) • Net weight: 1.1 - 1.2 kg Contents • Makita PV301D 12v Max CXT Cordless Brushless Sander Polisher • Side handle • Pad • Adaptor • Wool pad • Sponge pad • No Battery • No Charger • No Case

The Makita TW004G 40v Max XGT Brushless 1/2" Drive Impact Wrench is a cordless impact wrench powered by 40v Max XGT Li-ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The tool features a trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. Because in full speed mode the trigger travel is shorter, the full speed is reached faster. The built in LED job light provides optimal vision throughout. Features & Benefits • Auto stop system available both in forward/reverse rotation modes • Brushless motor • Compact & Lightweight • Constant speed control • Electric brake • Electronic 4 stage impact power selection • Ergonomic soft grip • Forward / reverse rotation • LED job light • Trigger switch with full speed mode • Variable speed control by trigger Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Blows per Minute (Max): 0-4,000ipm • Blows per Minute (Hi): 0-3,400ipm • Blows per Minute (Med): 0-2,600ipm • Blows per Minute (Lo): 0-1,800ipm • Driving Shank: 1/2” Square Drive (C-ring) • High Tensile Bolt: M10-M16 • Max Fastening Torque: 350Nm • Noise K Factor: 3dB(A) • Noise Sound Power: 110dB(A) • Noise Sound Pressure: 99dB(A) • Nut Busting Torque 630Nm • Standard Bolt: M10-M20 • Vibration Fastening Bolt: 16.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.9-2.2kg Contents • TW004G 40v Max XGT Cordless 1/2" Brushless Drive Impact Wrench • Belt Clip • BL4025 40v Max XGT Cordless Li-ion 2.5ah Battery (x2) • DC40RA 40v Max XGT Battery Fast Charger • MakPac Type 2 Connector Case

The UB001C is a 36v leaf blower which is powered by Makita's PDC01 or PDC1200 backpack battery power supplies (not included). This makes it ideal for larger workloads: the portable power supply can be loaded up with multiple batteries and as the weight is distributed across the back, the blower can be handled comfortably for longer periods without fatigue. Features & Benefits • 36V high power drive system using model PDC01 portable power pack • Variable speed • Cruise control function • Cruise control lever allows you to lock the variable speed control trigger at the desired power level • High air volume and speed delivered by brushless motor • Constant speed control • Boost mode: 20N max blowing force is always available • IPX4 Waterproof Design - resists splashing water • 3-stage telescopic long nozzle • Best grip to frame angle provides optimum nozzle to ground angle for efficient sweeping operation • Lightweight & compact for single handed operation • Low noise and no emissions • Compatible with shoulder belt Specifications • Battery Voltage: 36v • Battery Type: PDC01 / PDC1200 Portable Power Pack • No Load Speed: 0 - 24,000 rpm • Max air velocity: 70 m/sec • Max air volume: 17.6 cubic metres /min • Noise sound pressure: 83.4 dB(A) • Noise sound power: 91.4 dB(A) • Noise K factor: 2.5 dB(A) • Net weight 2.6 - 2.9 kg Contents • UB001CZ 36v Cordless Blower (bare tool) • Shoulder strap • Nozzle assembly • No Batteries • No Power Pack • No Charger

The Makita UR003G 40v Max XGT Brushless Line Trimmer is a cordless line trimmer powered by 40v Max XGT Li-ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The system automatically changes the cutting speed according to the load thanks to the Automatic Torque Technology. In addition to this the system also features Active Feedback Sensing Technology (AFT) which shuts down the tools if the rotation speed suddenly slows down. IPX4 level water resistant. Features & Benefits • Active Feedback Sensing Technology (AFT) • Automatic Torque Drive Technology • Brushless motor • Electric brake • Soft start feature • Constant speed control • Reverse switch for easy removal of grass clippings stuck • Electronic 3-speed (Hi/Med/Lo) • Small protector for better view of cutting area • Extremely low noise • Ergonomically designed loop handle with rubberised soft grip • IPX4 level water resistant Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Cutting Diameter: 350mm • Spindle Size: M10 x 1.25 L • Noise Sound Pressure: 72.2 dB(A) • Noise Sound Power: 89.7 dB(A) • Noise K Factor: 2.2 dB(A) • Vibration No Load: 2.5m/sec² • Vibration K Factor: 1.5m/sec² • No Load Speed (Hi): 6,500 rpm • No Load Speed (Med): 5,300 rpm • No Load Speed (Lo): 3,500 rpm • Net Weight: 4.5-4.8kg Contents • Makita UR003G 40v Max XGT Cordless Brushless Grass Trimmer • Nylon Cutting Head • Shoulder Strap • Accessory Bag • Hex Wrench • Box Driver • No Batteries • No Charger

The Makita UX01G Brushless Split Shaft Garden Multi Tool is a cordless multi-function power head powered by 40v Max XGT Li-Ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The system features Active Feedback Sensing Technology (AFT) which shuts down the tools if the rotation speed suddenly slows down. The tool delivers top comfort throughout thanks to the variable speed control feature. IPX4 level water resistant. Features & Benefits • Brushless motor • Loop handle • Overload protection • Electric brake • Variable speed control • Soft start • Constant speed control • Reverse switch for grass clipping removal • Active Feedback Sensing Technology (AFT) • Versatile optional attachments for a range of applications • Tool-less installation of attachments • IPX4 level water resistant Specifications • Battery Type: Makita XGT Lithium Ion (not included) • Battery Voltage: 40v • No Load Speed (Med): 0-8,200rpm • No Load Speed (Hi): 0-9,700rpm • No Load Speed (Lo): 0-5,700rpm • Maximum Output: 1,000w • Net Weight: 4.2-12.6kg Contents • Makita UX01G 40v Max XGT Cordless Brushless Split Shaft Garden Multi Tool • Shoulder Strap • Hex Wrench • Accessory Bag • No Batteries • No Charger