Developed as an 18v version of the TD111D (CXT) impact driver, the DTD155 features Makita's A-Mode setting which helps to eliminate cam out and cross threading by driving at low speed until the start of the tightening phase. It is a brushless machine which is powered by an LXT power tool battery (not included). Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Standard Bolt: M5-M14 • High Tensile Bolt: M5-M12 • Coarse thread (length): 22 - 90 mm • Max Fastening Torque: 140 Nm • Vibration (Fastening Bolt): 14.0 m/sec² • Vibration (K factor): 1.5 m/sec² • Noise sound pressure: 94 dB(A) • Noise sound power: 105 dB(A) • Noise K factor: 3 dB(A) • Net weight: 1.2 - 1.5 kg • Impact Selection: 2 Stage + Assist mode • Driving Shank: 6.35mm (1/4") Hex • Blows per Minute (Hi): 0 - 3900 ipm • Blows per Minute (Lo): 0 - 1600 ipm • Machine Screw: M4-M8 • No Load Speed (Hi): 0 - 3000 rpm • No Load Speed (Lo): 0 - 1300 rpm Features and Benefits • A-mode setting helps prevent cam out and cross threading • Brushless motor for maximum runtime • Electronic 2-speed Impact Power Selection • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Ergonomically designed high comfort grip. • Slim motor housing Contents • DTD155Z Cordless Impact Driver • Belt Clip • No Battery • No Charger • No Case

The Makita HP002G XGT 40V MAX Brushless Cordless Combi Drill is a cordless hammer driver drill powered by 40Vmax XGT Li-Ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The machine has 2 mechanical gears, ergonomic soft grip as well as variable speed control by trigger to ensure top control throughout use. For increased visibility, the tool features a handy LED job light. Specifications • Battery Type: Makita XGT Lithium Ion • Battery Voltage: 40 v • Capacity in Steel: 13 mm • Capacity in Wood: 38 mm • No Load Speed (Hi): 0 - 2,200 rpm • No Load Speed (Lo): 0 - 600 rpm • Blows per Minute (Hi) - ipm: 0 - 33,000 ipm • Blows per Minute (Lo) - ipm: 0 - 9,000 ipm • Capacity in Masonry: 13 mm • Torque Settings: 21+Drill • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 87 dB(A) • Noise sound power: 98 dB(A) • Noise K factor: 3 dB(A) • Net weight: 2.0 - 2.6 kg • Max. Fastening Torque (Soft Joint): 30Nm • Max. Fastening Torque (Hard Joint): 64 Nm • Vibration - Impact drilling into concrete: 9.0 m/sec² • Vibration - Drilling into metal: 2.5 m/sec² Features and Benefits • Brushless motor • Electric brake • 2 mechanical gears. • Constant speed control • Variable speed control by trigger • Forward / reverse rotation • LED job light • Keyless Chuck • Aluminium Gear Housing • All metal gear construction • Ergonomic soft grip • Belt clip Contents • Makita HP002G XGT 40V MAX Brushless Cordless Combi Drill • Belt clip • Screwdriver bit • No battery • No charger • No case

The Makita DSS610 is a cordless 18v circular saw that uses the Makita 18V LXT battery system. Its powerful motor enables a no load speed of 3700rpm and depths of cut of up to 57mm at 90°. The integrated job light makes it easy to trace the cutting line in low light which is aided by the integrated blow off nozzle which helps keep sawdust away from the working area. Specification • Battery Type: Lithium-ion • Voltage: 18 v • Blade Diameter: 165 mm • Bore Diameter: 20 mm • Depth of Cut @ 90°: 57 mm • Depth of Cut @ 45º: 40 mm • Depth of Cut @ 50°: 36 mm • Noise sound pressure: 91 dB(A) • Noise sound power: 102 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 3700 rpm • Vibration K factor: 1.5 m/sec² • Vibration: Cutting Chipboard: 2.5 m/sec² • Net weight: 3.2 kg Features and Benefits • Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. • Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. • Double safety trigger. • High comfort grips. • Large lock off lever. • LED job light that creates and easy to trace cutting line. • Removable dust nozzle. • Built in blow-off nozzle Contents • Hex wrench • Rip fence (Guide rule) • TCT saw blade

Designed to transform your Makita power tools into powerful ground trimmers, the EN422MP Ground Trimmer Attachment is perfect for maintaining lawns, edges, and hard-to-reach areas. With its easy-to-install design, you can quickly attach and detach the trimmer attachment, allowing for seamless transitions between different tasks. Features & Benefits • For use with Multi-Function Power Heads UX01G, DUX60 and DUX18 Specifications • Cutting Width: 250mm • Dimensions: L.1208 x W.144 x H.89mm • Weight: 2.2kg

Handheld 40v bagless vacuum cleaner with high suction capacity. Dustproof switches, 4 speeds and LED lights make it suitable for cleaning in difficult to reach places. Features & Benefits • Brushless motor • LED job light • 4 mode suction power selection with mode memory function • Pipe is fixed by the locking mechanism • Redesigned nozzle for comfortable operation • Compact and lightweight design • Capsule type • Quiet Operation • 2x push button switches (On/mode selection and Off) Specifications • Suction Power: 20 / 45 / 70 / 125 W • Battery Type: Lithium-ion • Voltage: 40v • Capacity: 0.73 litres • Max Airflow: 1.2 m³/min • Max Sealed Suction: 21 kPa • Vibration no load: 2.5 m/sec² • Net weight: 1.7-2.3 kg Contents • Makita CL001G 40V Max XGT Brushless Vacuum Cleaner • Nozzle • Straight Pipe • Sash Nozzle • No Battery • No Charger • No Case

Manufactured from HSS Bi-Metal with 8% cobalt and progressive tooth geometry, ensures long service life and high cutting speeds suitable for ferrous and non ferrous metal, stainless steel, Aluminium, wood and plastics. Ezychange holesaws can be purchased individually or as a kit designed with the right sizes to suit your trade. Compatible with other major manufacturers quick change holesaws. Features and Benefits • Manufactured from HSS Bi-Metal with 8% cobalt and progressive tooth geometry • Long service life and high cutting speeds • Compatible with other major manufacturers quick change holesaws Contents • 6x Ezychange HSS Bi Metal Hole Saw: 20, 25, 32, 40, 51, 65mm • Ezychange Adaptor • HSS Pilot Bit

The E-11689 is an extensively equipped 256 Piece Drill and Screw Combination Bit Set, suitable for drilling into wood, stone and metal, supplied in a compact and easy to carry, durable plastic carry case. Features & Benefits • 256 Piece Drill and Screw Combination Bit Set • Supplied in durable plastic carry case Contents • 45x HSS-R Metal Drill Bits: 1(x4), 1.5(x4), 2(x6), 2.5(x3), 3(x6), 3.2(x2), 3.5(x4), 4(x6), 4.5(x3), 5(x2), 5.5, 6, 7, 7.5, 8mm • 20x Nut Setters: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm • 16x Hex Key Wrench: 1/16”, 5/64” 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm • 27x Torx 25mm Screwdriver Bits: T10(x4), T15(x4), T20(x4), T25(x4), T27(x3), T30(x4), T40(x4) • 25x Slotted 25mm Screwdriver Bits: SL4.5(x5), SL5.5(x5), SL6(x5), SL6.5(x5), SL7(x5) • 22x Phillips 25mm Screwdriver Bits: PH0(x2), PH1(x3), PH2(x10), PH3(x5), PH4(x2) • 22x Pozi 25mm Screwdriver Bits: PZ0(x2), PZ1(x3), PZ2(x10), PZ3(x5), PZ4(x2) • 14x Hex 25mm Screwdriver Bits: H3(x3), H4(x4), H5(x4), H6(x3) • 20x 50mm Screwdriver Bits: PH1(x2), PH2(x5), PH3(x3), PZ1(x2), PZ2(x5), PZ3(x3) • 9x Masonry Drill Bits: 3, 4, 5, 6, 7, 8, 10x120mm, 8 & 10x300mm • 8x Wood Drill Bits: 3, 4, 5, 6, 7, 8, 9, 10mm • 5x Flat Bits: 12, 16, 20, 22, 25x150mm • 2x Socket Adaptors: 1/4” DR, 3/8” DR • 4x Hole Saws: 32, 38, 45, 54mm • 4x Depth Stops: 3, 5, 8, 10mm • Dry Wall Bit: 1/4” Hex • Screw Driver Handle • Magnetic Bit Holder • Adjustable Wrench • Hole Saw Adaptor • 3m Tape Measure • Diameter Gauge • Countersink Bit • Pencil 250 (x2) • Snap off Knife • Hex Wrench • Level • Plastic Carry Case

The HR260 26mm (1") SDS Plus Rotary Hammer improves on Makita's previous models with the addition of a recessed lever on the underside of the housing for switching between hammer & rotation modes without having to rotate the chuck. The lever's position on the drill body protects it against damage and accidental operationFeatures & Benefits:• Modified operation-mode change lever enables switch from 'Rotation' to 'Hammering' mode and vice-versa without rotating the chuck.• 3 mode operation: Rotation only / Rotation with hammering / Hammering only• One touch sliding chuck for easy bit installation and removal• Variable speed control by trigger• Forward/reverse rotation• Torque limiter• Double Insulation• 40 different bit angle settings• Compact and lightweight design• Depth stop• Ergonomic rubberized soft grip handle for optimal grip and control with minimal fatigueSpecifications:• Impact energy 2.4 J• Max in concrete (TCT bit) 26 mm• Max in concrete (TCT core) 68 mm• Max in concrete (Diamond core) 80 mm• Max in wood 32 mm• Max in steel 13 mm• Impacts per minute 0 - 4,600 ipm• Input Wattage 800 w• Net weight 2.8 kg• No Load Speed 0 - 1200 rpm• Vibration: Chiselling 9.5 m/sec²• Vibration: Hammer Drilling 15.5 m/sec²• Noise sound pressure 91 dB(A) • Noise K factor 3 dB(A)• Noise sound power 102 dB(A)• Vibration: Drilling into metal 2.5 m/sec²

The HR260 26mm (1") SDS Plus Rotary Hammer improves on Makita's previous models with the addition of a new lever mechanism for switching between hammer & rotation modes. Located on the underside of the housing, the recessed lever is protected against damage and accidental operation, and can be used without having to rotate the chuck.Features & Benefits:• Modified operation-mode change lever enables switch from 'Rotation' to 'Hammering' mode and vice-versa without rotating the chuck.• 3 mode operation: Rotation only / Rotation with hammering / Hammering only• One touch sliding chuck for easy bit installation and removal• Variable speed control by trigger• Forward/reverse rotation• Torque limiter• Double Insulation• 40 different bit angle settings• Compact and lightweight design• Depth stop• Ergonomic rubberized soft grip handle for optimal grip and control with minimal fatigueSpecifications:• Impact energy 2.4 J• Max in concrete (TCT bit) 26 mm• Max in concrete (TCT core) 68 mm• Max in concrete (Diamond core) 80 mm• Max in wood 32 mm• Max in steel 13 mm• Impacts per minute 0 - 4,600 ipm• Input Wattage 800 w• Net weight 2.8 kg• No Load Speed 0 - 1200 rpm• Vibration: Chiselling 9.5 m/sec²• Vibration: Hammer Drilling 15.5 m/sec²• Noise sound pressure 91 dB(A) • Noise K factor 3 dB(A)• Noise sound power 102 dB(A)• Vibration: Drilling into metal 2.5 m/sec²

The Makita Ezychange hole saw system ensures only one arbor needed is for all hole saws in the 16 - 152mm range, along with a quick release pilot drill connection. This not only allows speedy size changes but is also a safer method for the user. Manufactured from HSS Bi-Metal with 8% cobalt and progressive tooth geometry, these hole saws are designed to provide a long service life and high cutting speeds. They are suitable for ferrous and non ferrous metal, stainless steel, Aluminium, wood and plastics. Ezychange holesaws can be purchased individually or as a kit, designed with the right sizes to suit your trade. They are compatible with other major manufacturers quick change hole saws. This kit is designed specifically with plumbers in mind and is supplied in a hardwearing metal case for transport and storage. Contents • 19mm • 22mm • 29mm • 38mm • 44mm • 57mm

Developed based on the 18v DCG180, the Makita CG100D is a cordless caulking gun which uses 12v CXT batteries. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Max. Push Force: 5000 N • Noise sound pressure: 70 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 0-28 mm/sec • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 1.9 - 2.1 kg Features and Benefits • Variable speed control by trigger • Variable speed control dial. • Anti-drip function • LED job light • Trigger lock • 360 degree rotating sealant holder. • Plunger rod for bulk sealant can also be used as a suction plunger to pump up sealant into the 600ml holder from bulk container • Overload warning lamp • Ergonomic soft grip • Compact and lightweight design • Standard 300ml holder compatible with cartridge type sealant Contents • CG100DZA Cordless Caulking Gun • 300ml Holder • No Battery • No Case

The HP1641K is an electric percussion drill with a 13mm keyless chuck. The hammer mode can be switched on or off and the reverse mode has been redesigned to extend the lifetime of the replaceable carbon brushes; additionally, there is now no reduction in power when the drill is switched to reverse. The HP1641K has a compact design, with an adjustable auxiliary handle, depth stop, lock on button, and a large variable speed trigger. It is supplied with a plastic storage case and is suitable for drilling holes of up to 30mm diameter in wood, 13mm in steel or 16mm in masonry. Specifications • Voltage: 240v • Max. in steel: 13 mm • Max. in masonry: 16 mm • Max. in wood: 30 mm • No Load Speed: 0 - 2800 rpm • Blows per minute: 0-44800 bpm • Input wattage: 680 w • Net weight: 2.0 kg Features and Benefits • 240v version: fitted with a standard UK mains plug • Keyless chuck • Dual purpose: Rotation only and Rotation with hammering • New reversing system for less wear on carbon brushes • No power reduction in reverse mode • Large variable speed trigger for easy operation • Adjustable side handle with depth stop • Includes plastic case Contents • HP1641K Electric Hammer Drill 240v • Side handle • Depth stop • Carry case