Getting wet while you search for your door key will be a thing of the past once you buy the Palram Canopia Altair 1500 Grey Door Canopy - a robust and stylish porch awning, specially designed to protect your door from the weather.Expertly made using a high-impact 4mm acrylic panel, this superb front door canopy allows 85% light transmission. It blocks 100% of harmful UV rays and is completely UV-protected too, so will maintain its attractive appearance above your door without any risk of fracturing, fading or becoming brittle.The powder-coated aluminium profiles and laser-cut, powder-coated galvanised steel support arms are equally stylish and impervious to rust. A hidden rubber gasket, fitted to the rear of the frame, seals the porch canopy to the wall and eliminates any risk of seepage.Wind resistant to 120km/ hr (75ml/ hr) and snow-load tested to 100kg/ m² (20.5lbs/ ft²), this over door canopy provides exceptional weatherproof protection for your front door.The pre-cut panel does not require screws, so there's no danger, whatsoever, of it developing a leak. An intelligent locking system, mounting hardware and pre-drilled profiles will all help you achieve a simple, straightforward assembly.Constructed from recyclable components and supplied with a reassuring 3-year limited warranty, this wonderful door canopy is completely maintenance-free, saving you money and leaving you with more time to do the things you enjoy.You can purchase this particular model of over door canopy in 3 different sizes.Free delivery is available to most UK addresses.High-impact 4mm acrylic panel allows 85% light transmissionPowder-coated aluminium profilesLaser-cut, powder-coated galvanised steel support armsHidden rubber gasket prevents water seepageWind resistant to 120km/ hr (75ml/ hr)Snow-load tested to 100kg/ m² (20.5lbs/ ft²)Pre-cut panel, pre-drilled profiles and mounting hardwareIntelligent locking systemCompletely maintenance-free - saves time and moneyReassuring 3-year limited warrantyThis door canopy is available in 3 different sizesFree delivery to most UK addresses

Safe, effective and economical, the Portable Fan Greenhouse Heater with Digital Thermostat is the perfect way to warm your greenhouse or conservatory.This powerful 2400w greenhouse heater can warm a 15m area and be positioned on a table or floor, so is perfect whether you want to provide warmer conditions for plants in your greenhouse or enjoy your conservatory well into autumn.Designed to warm up quickly and operate quietly, this portable heater features attractive grey housing, stainless-steel heating elements and a digital thermostat which makes the heating and cooling processes exceptionally efficient, so you or your plants can enjoy the temperature you require with minimal fuss.Splash-proof too, this premium greenhouse heater is CE-approved and comes with a 2m cable for extra versatility.Free delivery is available to most UK addresses.Heats a 15m area2400w of powerWarms up quicklyOperates quietlyEconomical to useAttractive grey housing and stainless-steel elementsSplash-proofComes with 2m cableCE-approvedFree delivery to most UK addresses

The Makita DHG181 is a heat gun powered by 18v LXT Li-Ion battery, featuring max 550° air temperature for a wide range of cordless works, such as putting up wallpaper, drying or removal of paint and more. Specifications • Nozzle joint portion: 34.5 mm • Air temperature: 150 - 550° • Air volume (Mode 1 / 2): 120 / 200 litres/min • Voltage: 18v • Maximum Output: 10w • Net weight: 1.0 - 1.4 kg Features & Benefits • Adjustment function of air temperature and volume • Lock-on button • Lock-off lever • Trigger switch • LED job light with afterglow. • Air temperature adjustment dial • Anti-restart function • Overload protection (fuse) • Tool-less nozzle change • Quick release mechanism for easy nozzle replacement • Hanging hook • Compatible with current nozzles for AC machines Contents • Makita DHG181 18v Cordless LXT Heat Gun • Glass protection nozzle • Wide slot nozzle • Reflector nozzle • Reduction nozzle • No Batteries • No Charger • Makpac Connector Case (Type 2)

The DS5501 is a cordless 18v circular saw with a compact and lightweight design for high maneuverability and easy handling. Powered by Makita LXT batteries, the use of lithium ion technology enables a 40% weight reduction compared to older Ni-MH and Ni-Cad alternatives. Specifications • Voltage: 18 v • Depth of Cut @ 90°: 51 mm • Blade Diameter: 136 mm • Depth of Cut @ 45º: 35 mm • Bore Diameter: 20mm • Noise sound pressure: 92 dB(A) • Noise sound power: 103 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 3600 rpm • Vibration K factor: 1.5 m/sec² • Vibration (Cutting Wood): 2.5 m/sec² • Net weight: 2.6 kg Features and Benefits • Double safety trigger • High comfort grips • LED worklight; creates an easy to trace cutting line • Removable dust nozzle • Large lock off lever Contents • DS5501 18v Cordless Cirular Saw • Hex wrench • Rip fence (Guide rule) • Dust bag • TCT saw blade • No Battery • No Charger • No Case

Makita, a trailblazer in power tools, introduces the Makpac stackable case and organizer, a powerhouse combination designed to elevate your productivity. Crafted from robust materials, Makpac cases shield your valuable tools from impacts and environmental factors. The Makpac Organizer offers a tailor-made solution to keep your essentials in check. Crafted with precision, this organizer features customizable compartments that accommodate a wide range of tools, ensuring they remain securely in place during storage and transport. From screws and nails to small power tools, this organizer keeps everything within easy reach. The cases include strong handles which fold down, this not only allows for easy transportation, but also for the connection to a case above it. The rounded grip ensures easy removal from a stack. The Makita Makpac stackable cases offer unmatched adaptability. Their modular design lets you build a tailored storage setup, ensuring your tools are organized and easily accessible. Features & Benefits • Customisable organizer • Stackable for storage and easy transportation • Strong and collapsible handles • Rounded grips make it easy to remove individual cases • Organiser has rugged construction to keep contents protected Specifications • Makpac Type 2 Dimensions (L x W x H): 396 x 296 x 157mm • Makpac Type 3 Dimensions (L x W x H): 396 x 296 x 210mm • Makpac Type 4 Dimensions (L x W x H): 396 x 296 x 315mm • Makpac Organiser Dimensions (L x W x H): 295 x 395 x 110mm Contents • 1 x Makpac Type 2 Connector Case • 1 x Makpac Type 3 Connector Case • 1 x Makpac Type 4 Connector Case • Makpac 13 Compartment Plastic Organiser Case

The Makita DHP487 is a Cordless Brushless Combi Drill powered by an 18v LXT Li-Ion battery. It features variable speed control for a wide range of drilling, fastening and hammer drilling applications. The high speed mode is for speedy drilling in light duty applications and low speed mode is for heavy duty applications requiring high torque. It has a single sleeve keyless chuck for easy bit installations and removals with 20 torque settings plus drill mode for added fastening control. The electric brake is for operator safety and twin LED job lights are to illuminate the work area. Features and Benefits • 2 mechanical gears • Belt clip • Best possible ergonomic handle • Brushless motor • Electric brake • Forward / reverse rotation • LED job light • Single sleeve keyless chuck • Variable speed control Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Chuck Capacity: 1.5-13 mm • Max. Diameter in Masonry: 13mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 36mm • Max. Fastening Torque (Hard Joint): 40 Nm • Max. Fastening Torque (Soft Joint): 25 Nm • Torque Settings: 20 + Drill • Blows per Minute (Hi): 0-25,500 ipm • Blows per Minute (Lo): 0-7,500 ipm • No Load Speed (Hi): 0-1,700 rpm • No Load Speed (Lo): 0-500 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 94 dB(A) • Noise Sound Pressure: 83 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Drilling into metal): 2.5 m/sec² • Vibration (Impact drilling into concrete): 10.5 m/sec² Contents • Makita DHP487 18v LXT Cordless Brushless Combi Drill • Screwdriver Bit • Belt Clip • Makita BL1850B LXT 5ah 18v Li-ion Battery (x1) • Makita DC18RC Compact Charger • Carry Case

The DHR202 is a 3 mode SDS Plus rotary hammer drill which is powered by Makita 18v LXT lithium ion batteries. Specifications • Compatible battery type - Lithium-ion • Voltage - 18 v • Max in concrete - 20 mm • Max. in steel - 13 mm • Max. in wood - 26 mm • Impact energy - 2.0 J • Blows per minute - 0-4000 bpm • Noise sound pressure - 87 dB(A) • Noise sound power - 98 dB(A) • Noise K factor - 3 dB(A) • No Load Speed - 0 - 1100 rpm • Vibration: Drilling - 3 m/sec² • Vibration K factor - 1.5 m/sec² • Vibration: Hammer Drilling - 14.5 m/sec² • Vibration: Chiselling - 11 m/sec² • Net weight - 3.2 kg Features and Benefits • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow • One-touch sliding chuck for easy bit changes • Triple operation mode: Rotary only, hammer only and rotary hammer • Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions Contents • DHR202RMJ 18v Cordless Rotary Hammer Drill • Side Handle • Depth Stop • No Battery • No Charger • No Case

Makita continues to expand and refine the 18v LXT cordless platform that has driven the brand to market leadership and the range has been bolstered by new machines which are designed for improved performance with reduced size and weight. The DDF484 has a two-speed, all metal drive system, variable speed trigger, electric brake, LED job light and a belt clip. It will run up to 2,000rpm in high mode, generates 54Nm max torque and has 21 clutch settings plus a drill mode. Weighing 1.8kg and measuring 172mm in length, the machine also benefits from an energy efficient brushless motor to squeeze maximum runtime out of LXT battery packs. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Max Torque: S/H 30 / 54 Nm • Torque Settings: 21 + drill • Capacity in Steel: 13 mm • Capacity in Wood: 38 mm • Chuck Capacity: 1.5 - 13 mm • No Load Speed (Hi): 0 - 2,000 rpm • No Load Speed (Lo): 0 - 500 rpm • Vibration (Drilling): 2.5 m/sec² • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 76 dB(A) • Noise K factor: 3 dB(A) • Net weight: 1.5 - 1.8 kg Features and Benefits • Electric brake • 2 mechanical gears • Variable speed control by trigger • Forward / reverse rotation • LED job light • Compact design with overall length of 172mm • Keyless Chuck • Aluminium Gear Housing • All metal gear construction • Ergonomic soft grip • Belt clip Contents • DDF484Z Cordless Drill Driver • No Battery • No Battery Charger • No Case

Features and Benefits• Double Insulated for Safety• Outstanding durability• Increased heat resistance• Superior anti-dust structure• Machined bevel gear for strength• Soft grip for more comfort and controlSpecifications• Wheel size: 230mm • Bore Size: 22mm • Spindle size: M14 x 2mm • Wire Cup Brush: 110mm • No Load Speed: 6,600rpm • Input wattage: 2,000w• Net Weight: 4.7kg Includes:• Lock Nut Wrench• Side Handle• Wheel Guard• Diamond Wheel• Carry Case

The Makita GA4540C Variable Speed Angle Grinder 115mm is an advanced power tool designed for precision and versatility in cutting, grinding, and polishing tasks. Featuring a powerful 1400w motor, this angle grinder ensures superior performance and efficiency. The soft start feature ensures smooth operation, reducing the risk of sudden jolts and enhancing user safety. The 115mm wheel size is perfect for detailed work, providing excellent manoeuvrability and control. Equipped with Makita's Super Joint System (SJS), the GA4540C minimises motor and gear damage by absorbing shocks and vibrations. The electronic current limiter protects the motor from overload, extending the tool's lifespan. The ergonomic barrel grip design offers enhanced comfort and reduced fatigue during extended use. The tool-less wheel guard adjustment and spindle lock enable quick and easy accessory changes, improving workflow efficiency. Additionally, the labyrinth construction seals the motor and bearings from dust and debris, ensuring durability and reliable performance. Features & Benefits • Slim motor housing with small circumference of 207mm for improved grip • High performance motor with extra long life due to high heat resistance • Labyrinth design protects the engine from the impurities that come with the cooling air • Spindle lock • Double insulated Specifications • Voltage: 110v • Continuous Input Power: 1400w • No Load Speed: 11000min • Max Depth of Cut: 30mm • Spindle Thread: M14 • Grinding Disc Diameter: 115mm • Weight Without Cable: 2.5kg • Power Supply Cord: 2.5m Contents • Makita GA4540C Variable Speed Angle Grinder 115mm • Grip Complete 125mm • Lock Nut Wrench 35 • Cutting W.C.A 115 Comp • Depressed Centre Wheel 115-24

The Makita GA4540C Variable Speed Angle Grinder 115mm is an advanced power tool designed for precision and versatility in cutting, grinding, and polishing tasks. Featuring a powerful 1400w motor, this angle grinder ensures superior performance and efficiency. The soft start feature ensures smooth operation, reducing the risk of sudden jolts and enhancing user safety. The 115mm wheel size is perfect for detailed work, providing excellent manoeuvrability and control. Equipped with Makita's Super Joint System (SJS), the GA4540C minimises motor and gear damage by absorbing shocks and vibrations. The electronic current limiter protects the motor from overload, extending the tool's lifespan. The ergonomic barrel grip design offers enhanced comfort and reduced fatigue during extended use. The tool-less wheel guard adjustment and spindle lock enable quick and easy accessory changes, improving workflow efficiency. Additionally, the labyrinth construction seals the motor and bearings from dust and debris, ensuring durability and reliable performance. Features & Benefits • Slim motor housing with small circumference of 207mm for improved grip • High performance motor with extra long life due to high heat resistance • Labyrinth design protects the engine from the impurities that come with the cooling air • Spindle lock • Double insulated Specifications • Voltage: 240v • Continuous Input Power: 1400w • No Load Speed: 11000min • Max Depth of Cut: 30mm • Spindle Thread: M14 • Grinding Disc Diameter: 115mm • Weight Without Cable: 2.5kg • Power Supply Cord: 2.5m Contents • Makita GA4540C Variable Speed Angle Grinder 115mm • Grip Complete 125mm • Lock Nut Wrench 35 • Cutting W.C.A 115 Comp • Depressed Centre Wheel 115-24

The DMR203 is cordless job site speaker with True Wireless Stereo (TWS) technology. TWS technology allows the user to wirelessly pair two DMR203s via Bluetooth to enjoy deep, rich and powerful stereo sound. The DMR203 can be powered via an AC adaptor or from a Makita LXT or CXT lithium ion power tool battery. Please note it will not work with G-Series batteries or the older Ni-CAD and Ni-MH types. Features & Benefits • Bluetooth jobsite speaker which can be powered via an AC adaptor or a Makita power tool battery • Six selectable sound modes to suit the music genre and MY EQ mode to customize your sound • My Equaliser (MY EQ) Mode: enables user to independently adjust treble, midrange and bass • Multi-speaker connection is possible thanks to True Wireless Stereo (TWS) technology • Up to ten DMR203s can be paired and connected to one mobile device to play the same sound simultaneously • Equipped with Bluetooth Version 5.0 Class 2 to wirelessly connect to mobile devices • Colour LCD panel: Song title, artist name, etc. can be displayed • An 89mm passive radiator works together with the woofer to provide extra deep and rich bass • IP65 rated dust and shower-proof construction • AUX-IN jack • AC adaptor jack • Storage compartment for mobile device • Mobile device can be charged while stored • Flat anti-slip top surface • Elastomer bumpers protect against rough jobsite handling • Carry handle for easy transport Specifications • Battery Range: 10.8-18v • Woofer Diameter: 101.6mm • Tweeter Diameter: 36mm • Passive Radiator Diameter: 89mm • Practical Output (18v): 10.0w • Net Weight: 2.7-3.4kg Contents • Makita DMR203 18v Cordless Bluetooth Jobsite Speaker • AC Power Adaptor • No Batteries • No Charger