Brown 8ft timber fence posts are suitable for all types of panel fencing These 8ft timber fence posts have the benefit of being pressure treated to give a 15 year anti-rot guarantee for use in ground contact. Always remember to allow at least 600mm of post length into the ground, thus you should order your post lengths 2' (600mm) longer than your panel height, i.e; 8' posts for a 6ft fence, 7' posts for a 5' fence, etc. The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti-rot guarantee. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial. Make the job simple and save time with our easy to use easy-fit fixing spike and bases as featured in the accessories. 15 year anti-rot guarantee Incised for deeper preservative penetration Pressure treated Heavy duty fence post Available in 11 different sizes Ideally suited for fencing 6ft in height Recommended sinking depth 60cm Finish off with a post cap or decorative finial Use our easy-fit fixing accessories

A sturdy open style trellis that can be used as a panel, infills or a wall support for climbing plants. This trellis panel has been dip treated to provide it with a 10 year anti-rot guarantee which must be supported by annual retreatment. Hole Size: 163 x 163mm A basic-model 183 x 183cm (6ft x 6ft) trellis which combines function with durability, idea for climbing plants or screening off your garden. Also available in 30 x 183cm (11.8” x 6ft), 61 x 183cm (2ft x 6ft), 91 x 183cm (3ft x 6ft), 122 x 183m (4ft x 6ft Dip treated FCS timber to ensure protection against rot and decay, with a 10-year guarantee. Can be attached to a wall to show off thriving climbing plants, covering brickwork or simply as a decorative garden divider. Applying weatherproof staining or varnish to the trellis maintains a superb finish that requires minimum fuss.

The B-14168 is a 255mm Saw Blade suitable for Makita Line Trimmers to convert it for use as a Brush Cutter. It is ideal for cutting bushes and thin tree trunks. Features and Benefits • Suitable for Makita Line Trimmers • Converts Makita Line Trimmer into a Brush Cutter • Ideal for cutting bushes and thin tree trunks Specifications • Diameter: 255mm • Description: Saw Blade • Bore: 25.4mm • Tooth Count: 80 • Pack Quantity: 1

Makita Chainsaw and Bar Oil utilises advanced technology for optimal chain saw lubrication. Its unique formula effectively resists flinging, delivering superior lubrication to both the bar and chain. With its special adhesive properties, this oil offers exceptional fling resistance and minimal maintenance, ensuring reliable performance and extended equipment life. Features & Benefits • Fast bio-degradable • Not harmful to ground water • Good adhesion Specifications • Volume: 5L

Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Specifications • Bore: 20mm • Diameter: 165mm • Kerf: 2.0mm • Rake: 18° • Thickness: 1.25mm • Tooth Count: 40 • Material Type: Wood/Nails • Machine Type: Portable saw Features and Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity

Makita Standard circular saw blades for portable machines. Specifications • Bore (B): 30 mm • Diameter (D): 260 mm • Kerf (K): 2.3 mm • Rake (R): 0° • Thickness (T): 1.8 mm • Tooth Count: 70 • Material Type: Wood/Alu • Machine Type: Mitre Saw Features and Benefits • Ideal for construction, woodworking, carpentry and joinery • Good cutting speed at low cost

Impact rated 1/2" drive deep hexagon sockets. Features and Benefits • High strength for long life • Robust socket for impact wrench • Includes rubber retaining ring and locking pin Specifications • Drive: 1/2" Square • Diameter: 12mm • Length: 75mm • Pack Quantity: 1 • Pin: 256095-3 • O-Ring: 213370-0

Makita ML001G 40v XGT LED Cordless Torch. Maximum run time at 160 Lumens for 45 hours using 4 x 0.5W LEDs. 12 position head with positive stops from 0-170°. Features and Benefits • 0.5W 4 x LED • Max Run Time 55 Hours / 160 Lumens • 12 position head with positive stops from 0-170°

Black phosphate collated screws for coil feed screwdrivers. Suitable dry wall applications in steel and wood. Manufactured to DIN1812; certified to 48 hour salt spray test. High quality non jamming tapes. Features and Benefits • Very fast and reliable auto-feed screwing. Minimal jamming • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement • Applications: Autofeed, Drywall, dry-lining, plasterboard, steel and wood Specifications • Screw Head: PH2 • Gauge: 3.9 • Coating: Phosphate • Thread Type: Coarse • Size: 41mm • Screws per Strip: 50 • Pack Quantity: 20

The Makita MAKBLADE Circular Saw Blade is a high-performance accessory designed to deliver precise and clean cuts through various types of wood. Featuring precision-ground teeth, the Makblade ensures smooth and accurate cuts while reducing splintering, making it ideal for hardwood, softwood, plywood, and other wooden materials. Its anti-vibration design minimises noise and vibration, enhancing stability and control for a superior cutting experience. The thin kerf design reduces material wastage and requires less power, improving the efficiency of your cutting tasks. Features and Benefits • Suitable for use with mitre saws and table saws • Carbide tipped for increased efficiency • For sawing wood Specifications • Blade Diameter: 260mm • Tooth Quantity: 60 • Bore Size: 30mm • Kerf Dimension: 2.3mm • Rake Angle: 5° • Quantity: 1

B-49373 Drilling and driving accessory set in plastic carry case. Contents • 19x HSS-TIN Drill Bit: 1, 1.5, 2 (x2), 2.5, 3 (x2), 3.5, 4 (x2), 4.5, 5 (x2), 5.5, 6, 6.5, 7, 7.5, 8mm • 5x Masonry Drill Bit: 4, 5, 6, 7, 8mm • 4x Wood Drill Bit: 4, 5, 6, 8mm • 3x 50mm Phillips Screwdriver Bit: PH1, PH2, PH3 • 3x 50mm Pozi Screwdriver Bit: PZ1, PZ2, PZ3 • 2x 50mm Slotted Screwdriver Bit: SL1.0X5.5, SL1.2X6.5 • 4x 50mm Torx Screwdriver Bit: T20, T25, T30, T40 • 4x 50mm Hex Screwdriver Bit: H3, H4, H5, H6 • 4x 25mm Pozi Screwdriver Bit: PZ0, PZ1, PZ2, PZ3 • 5x 25mm Phillips Screwdriver Bit: PH0, PH1, PH2 (x2), PH3 • 5x 25mm Torx Screwdriver Bit: T10, T15, T20, T25, T30 • 5x 25mm Slotted Screwdriver Bit: SL0.5X3, SL0.5X4, SL0.6X5, SL1.0X6 (x2) • 8x Nut Driver: 5, 5.5, 6, 7, 8, 9, 10, 11mm • 1/2" Countersink • Centre Punch • Magnetic Bit Holder • Plastic Case

The Makita SPECIALIZED Circular Plunge Saw Blade for Wood Cutting is the ultimate choice for precision and efficiency in woodworking projects. Designed to deliver exceptional performance, this high-quality blade is engineered for clean, accurate cuts through a wide range of wood materials. Crafted with ultra-sharp tungsten carbide-tipped (TCT) teeth, this blade ensures durability and long-lasting performance. Its precision-balanced design minimises vibration, providing smoother cuts and greater user comfort. Features and Benefits • For cutting wood • Blade with carbide tips Specifications • Blade Diameter: 160mm • Bore: 20mm • Kerf: 2.2mm • Tooth Count: 48 • Rake Angle: 8°