The Makita TD111D, a 12v CXT impact driver with a brushless motor, delivers an outstanding 135Nm of tightening torque yet weighs just 1.1kg, with an overall length of only 135mm from chuck to back of body. It will deliver up to 3,900 impacts per minute in high-mode with the capacity to drive home an M14 bolt. This compact machine features Makita's A-mode impact operation, which drives fasteners slowly to begin with until the thread tightening reacts when the full power is switched on to drive the fastener home. This mode eliminates screw cam-out and cross threading which causes the fixing to fail. In addition, the TD111D has a variable speed trigger, electric brake, soft grip handle and LED job light. The TD111D is available with charger and two 2.0Ah batteries in a Makpac connector case, or as a body only machine for users who do not require them. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Drive shank: Hex 1/4 " • Standard Bolt: M5-M14 • High Tensile Bolt: M5-M12 • Machine Screw: M4-M8 • Coarse thread (length): 22 - 90 mm • Max Torque: 135 Nm • Blows per Minute (Hi): 0 - 3900 ipm • Blows per Minute (Lo): 0 - 1600 ipm • No Load Speed (Hi): 0 - 3000 rpm • No Load Speed (Lo): 0 - 1300 rpm Features and Benefits • New A-mode: helps to eliminate cam-out & cross threading • Variable speed • Electric brake • Forward/reverse rotation • LED job light • Compact design with overall length of 135mm • Brushless motor • Ergonomic soft grip • Two selectable Impact Modes (High/Low) • Belt clip Contents • TD111DZ Cordless CXT Impact Driver • Screwdriver Bit • No Battery • No Charger • No Case

The MT series from Makita offers a comprehensive list of tools at an affordable market price. Produced to a standard far exceeding that of the DIY market, the MT series combines industrial build quality with fundamental professional requirements, without the professional price tag. The MT series is therefore tailored to suit all discerning home-users, apprentices and trade users who don’t require all the features of a high-end professional machine, just a robust and reliable tool to get the job done. Specifications • Noise sound pressure: 85 dB(A) • Noise sound power: 96 dB(A) • Noise K factor: 3 dB(A) • Input Wattage: 500 w • No Load Speed: 16,000 rpm • Vibration K factor: 1.5 m/sec² • Vibration (planing softwood): 3.5 m/sec² • Net weight: 2.7 kg • Planing Depth: 2 mm • Planing Width: 82 mm • Max Rebate Depth: 9 mm Features and Benefits • Ergonomically designed handle with rubberised soft grip • Fits the hand perfectly to provide maximum control and comfort • Foot added on base plate prevent damage to planer blades or to material surfaces • V-groove on base for easy chamfer cutting • Compatible with guide rule • Dust Nozzle Set • Double Insulated

The MT series from Makita offers a comprehensive list of tools at an affordable market price. Produced to a standard far exceeding that of the DIY market, the MT series combines industrial build quality with fundamental professional requirements, without the professional price tag. The MT series is therefore tailored to suit all discerning home-users, apprentices and trade users who don’t require all the features of a high-end professional machine, just a robust and reliable tool to get the job done. The M4501 is a robust and durable reciprocating saw which has a built in dust blower to keep the cutting area clean and visible while the machine is in operation. Specifications • Max in wood: 255mm • Max cut in pipe: 0 - 130 mm • Strokes per Minute: 0 - 2,800 spm • Stroke Length: 28mm • Noise sound pressure: 87 dB(A) • Noise sound power: 98 dB(A) • Noise K factor: 3 dB(A) • Input Wattage 1,010 w • Vibration K factor: 1.5 m/sec² • Vibration: Cutting Wood: 22.0 m/sec² • Vibration: Cutting Chipboard: 19.5 m/sec² • Net weight: 3.2 kg Features and Benefits • Variable speed control by trigger • Tool-less blade change • Shoe Adjustment • Built-in dust blower clears the line of cut for greater accuracy • Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments • Large 2-finger trigger switch with conveniently-located lock-on button for continuous use • Ergonomically designed handle with rubberised soft grip • fits the hands perfectly to provide maximum control and comfort • Externally accessible brushes for greater serviceability

Makita's BL4025 is a 2.5ah lithium ion battery which is suitable for use with the 40v Max XGT range of cordless power tools. Features & Benefits • Greatly increased water and drop impact resistance • Digital communication between the battery and the tool • Digital communication between the battery and the charger • Battery fuel gauge: 4 LED gauge with a check button • Cooling system for maximum battery life Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Battery Capacity: 2.5ah

The DUR193 is a compact and handy line trimmer for trimming and finishing of gardens and other green spaces. This tool, with a cutting width of 260mm, has a balanced shaft design for added user convenience. Equipped with an adjustable telescopic shaft. Features & Benefits • Edger Function • Lightweight for reduced operator fatigue • Redesigned front grip for increased manoeuvrability • Telescopic shaft for optimum cutting position • Well balanced design with fully adjustable features to suit any operator Specifications • Battery Type: Makita LXT Lithium-ion • Battery Voltage: 18v • Cord Feed System: Bump and Feed • Cutting Diameter: 260mm • No Load Speed: 7,800rpm • Noise Uncertainty (K Factor): 1.5dB(A) • Nylon Line Diameter: 1.65mm • Product Dimensions (L x W x H): 1,248-1,436 x 265 x 358mm • Shaft Adjustment Range: 190mm • Sound Power Level: 83.1dB(A) • Sound Pressure Level: 73.2dB(A) • Vibration Level (3 Axes):

Features and Benefits• New reversing system• Extended service life of the carbon brushes• No power reduction even in reverse rotation• In-line positive grip design maximises power thrust• Large trigger switch for easy operation• Variable-speed-trigger and reversingSpecifications• Voltage: 110v• Max. in masonry: 16 mm• Max. in steel: 13 mm• Max. in wood: 30 mm• Blows per minute: 0-44800 bpm• Input wattage: 680 w• No load speed: 0 - 2800 rpm• Net weight: 2.0 kgIncludes:• Depth Gauge• Side Handle

Features:- New reversing system- Extended service life of the carbon brushes- No power reduction even in reverse rotation- In-line positive grip design maximises power thrust- Large trigger switch for easy operation- Variable-speed-trigger and reversingIncludes:Depth GaugeSide HandleSpecifications:Voltage: 240vMax. in masonry: 16 mmMax. in steel: 13 mmMax. in wood: 30 mmBlows per minute: 0-44800 bpmInput wattage: 680 wNo load speed: 0 - 2800 rpmNet weight: 2.0 kg

For use with the Makita DDG460 Earth Auger Drill. Suitable for use with soil & sand. High speed drilling is possible due to the specially shaped twin blade which moves earth faster than single blade designs. Includes pin for mounting. Specifications • Makita Part Code: E-07294 • Diameter: 100mm

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material removal Specifications • Diameter: 22mm • Overall Length: 920mm • Working Length: 800mm • Shank: SDS Max • Pack Quantity: 1

The Makita 4 Piece 821550-0 MakPac Connector Stackable Power Tool Case Set consists of 4 of the Type 2 Connector Cases. Makita's stackable cases offer a modular approach to tool storage. Tailor your setup with precision, ensuring a clutter-free workspace. Effortlessly stack and lock cases to accommodate your expanding tool collection, keeping everything easily accessible. These cases are not just about convenience, they're built tough. Crafted from robust materials, the Makpac Connector cases shield your tools from impacts, dust, and the elements. Your tools stay in prime condition, extending their lifespan. The interconnected cases take up less storage space and are easy to transport around. The rounded grips make it easy to remove the individual cases. Contents can be accessed quickly and easily when multiple boxes are stacked together. Features & Benefits • Strong and collapsible handles • Impact resistant • Rounded grips make it easy to remove individual cases • Compatible with other Makpac cases • Stackable for storage and easy transportation Specifications • Makpac Type 2 Dimensions (L x W x H): 396 x 296 x 157mm Contents • 4 x Makpac Type 2 Connector Case

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material removal Specifications • Diameter: 37mm • Overall Length: 370mm • Working Length: 250mm • Shank: SDS Max • Pack Quantity: 1