The Makita DLX2214TJ contians the Makita DHP481 combi drill and the DTD170 impact driver along with a Makpac type 3 carry case, batteries and charger. The ideal introduction to the Makita 18v LXT platform, the batteries and charger included in this kit are compatiable with a wide range of additional cordless tools. Features and Benefits • DHP481 has a twin LED job light with afterglow • Batteries and charger are compatiable with the rest of the Makita LXT 18v range • Stackable Makpac connector case for transport and storage Contents • DHP481Z Combi Drill • DTD170Z Impact Driver • 2 x BL1850B 5ah batteries • DC18RC Fast charger • Makpac type 3 carry case

Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Specifications • Bore: 15.88mm • Diameter: 185mm • Kerf: 2.0mm • Rake: 25° • Thickness: 1.25mm • Tooth Count: 40 • Material Type: Wood/Nails • Machine Type: Portable saw Features and Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity

The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds Specifications • Diameter: 115mm • Bore: X Lock

The Makita ML800 18v LXT Cordless LED Head Torch is is a portable, hands-free light source for wherever the job takes you. Equipped with a high-luminance 1.6W single LED which provides a level of illumination of up to 100 lumens. The lamp head adjusts 0 degrees to 90 degrees with 7 positive stops for improved lighting on your work surface. The non-slip rubber strap keeps the lamp head securely attached to hard hats. It features a IPX-4 water-resistant design and it can also be used as a stationary light by attaching the lamp head to the battery holder. Can be powered by both 14.4V and 18V Li-ion batteries. Specifications • Bulb: 1 LED • Battery Type: 18V LXT Lithium-Ion • Voltage: 18 v • Overall Length: 2-13/16" • Net Weight (with battery) : 1.7 lbs / 771 g Features and Benefits High-luminance 1.6W single L.E.D. provides 100 lumens Lamp Head adjusts 0º - 90º with 7 positive stops • Lamp Head features a IPX-4 water-resistant design • Non-slip rubber strap keeps the lamp head securely attached to hard hats • Can also be used as a stationary light by attaching the lamp head to the battery holder • Battery holder features a built-in clip for attaching to belt • 47" cord connects battery holder to the the lamp head • Compact and ergonomic design at only 2-13/16" long • Weighs only 1.7 lbs. with battery (battery not included) • 3-year limited warranty • Battery and charger sold separately • Only use genuine Makita batteries and chargers Contents • Makita ML800 18v LXT Cordless LED Head Torch • Battery and charger sold separately

The Makita MAKBLADE PLUS Circular Mitre Saw Blade for Wood is a high-quality cutting tool engineered for precision and efficiency. Designed specifically for woodcutting applications, this saw blade delivers exceptional performance and durability. Crafted from premium materials and featuring advanced tooth geometry, this circular saw blade ensures clean and accurate cuts with minimal splintering. Its innovative design also helps reduce friction and heat buildup, resulting in smoother cutting action and extended blade life. Specifications • Blade Size: 190mm • Cutting Width: 2mm • No. of Teeth: 60 • Bore: 20mm • Tooth Angle: 5°

The Makita 19 Piece HSS-TiN Drill Bit Set (B-67795) is a versatile and durable collection designed for precise drilling in metal, wood, and plastic materials. Each drill bit in this set is made from high-speed steel (HSS) and coated with Titanium Nitride (TiN), enhancing hardness, heat resistance, and durability. The TiN coating reduces friction for smoother drilling and extends the lifespan of the bits. The bits feature a cylindrical shank design, and are compatible with most standard corded or cordless drills. Features & Benefits • High speed steel • Cylindrical shank • Long lasting • Chisel edge • Split point Specifications • Diameter: 1.5-10mm Contents • 1.5 (2), 2 (2), 2.5 (2), 3 (2), 3.5 (2), 4, 4.5, 5, 5.5, 6, 6.5, 7, 8,10mm

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material removal Specifications • Diameter: 18mm • Overall Length: 340mm • Working Length: 200mm • Shank: SDS Max • Pack Quantity: 1

The Makita ML006G 40V Max XGT Cordless LED Flashlight is a high-performance flashlight that offers exceptional brightness and versatility for a wide range of applications. Designed for use with the XGT cordless system, this flashlight delivers outstanding performance and efficiency, making it an ideal choice for construction, industrial, and other demanding environments. With a powerful LED light source, the 40V Max XGT Cordless Flashlight ML006G provides an impressive 900 lumens of brightness, making it one of the brightest cordless flashlights on the market. This makes it ideal for use in low-light conditions, allowing you to work safely and efficiently, even in the darkest environments. It features a rotating head that allows you to adjust the angle of the light beam, so you can easily direct it exactly where you need it. Features & Benefits • 18 extra bright LEDs provides 500 lumens • Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles • Large retractable hook allows user to hang the flashlight from steel pipes up to 50mm • Light head is rotatable with the flashlight hanging down • 3 ode on/off switch delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode • Compact, ergonomic and lightweight design • Rubberized soft grip • Light diffusing lens softens LED light to reduce glare and provides widespread illumination Specifications • LED’s: 18w • Illumination: 500lx • Net Weight: 1.1kg Contents • Makita ML006G 40v Max XGT Cordless LED Flashlight • No Batteries • No Charger • No Case

The Makita DC18SD 18V LXT Li-ion Battery Charger is a reliable and efficient charging solution for all your Makita LXT 18V Lithium-Ion batteries. Designed to optimise battery life and performance, this charger ensures your tools are always ready for the job. Featuring advanced charging technology, the Makita DC18SD provides fast and safe charging, reducing downtime and increasing productivity. It is equipped with a built-in fan that cools the battery during charging, preventing overheating and extending battery life. The charger also includes an LED indicator that displays the charging status, making it easy to monitor the progress. Specifications • Battery Voltage: 14.4-18v • Average Charging Time: 30-130min • Charging Time 2ah: 45 min • Charging Time 2.5ah: 45 min • Charging Time 3ah: 60 min • Charging Time 4ah: 90 min • Charging Time 5ah: 110 min • Charging Time 6ah: 130 min • Power Supply Cord: 2m

A comprehensive selection of circular saw blades for all makes and models of portable circular saw.A wide range of sizes from 140mm - 355mm and tooth counts from 10 to 60, the range covers applications from coarse rip and cross cutting to extra fine cross cutting.Features:- Fully hardened and tensioned blades absorb impact and remain flat and true- High grade tungsten carbide with low wear rate for extended blade life- Precision honed for a sharper longer lasting edge- Thin kerf for less waste and reduced feed pressureSpecifications:Bore (B) - 30 mmDiameter (D) - 210 mmKerf (K) - 2.4 mmRake (R) - 20 ºThickness (T) - 1.6 mmTooth Count - 40Material Type - Wood

The HM0870C is a demolition hammer with an SDS Max chuck. It is designed for chiselling applications and the accessory can be installed in one of twelve positions for striking the workpiece from the optimum angle. It has a soft start motor and a variable speed dial, along with a constant speed control circuit to prevent the tool from getting bogged down under load. Designed to offer a long service life and excellent durability, the HM0870C has a service indicator light which comes on to let the user know when the brushes are almost worn out and the tool is due to be serviced. It is supplied with a tube of grease and a carry case for storage. Specifications • Voltage: 110v • Chuck: SDS Max • Modes: Hammer only • Impact energy: 7.6 J • Blows per minute: 1100-2650 bpm • Input wattage: 1100 w • Vibration: Chiselling 11 m/sec² • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 87 dB(A) • Noise sound power: 98 dB(A) • Noise K factor: 3 dB(A) • Net weight: 5.1 - 5.3 kg Features and Benefits • SDS Max demolition hammer • Suitable for all SDS Max chisels • Double Insulated • Variable speed dial • Constant speed under load • Soft start motor • One touch sliding chuck for easy bit installation and removal • LED lamp indicates when to replace carbon brushes • Includes bit grease and carry case Contents • HM0870C SDS Max Demolition Hammer 110v • Bit Grease • Side Handle • Carry Case

The HM0870C is a demolition hammer with an SDS Max chuck. It is designed for chiselling applications and the accessory can be installed in one of twelve positions for striking the workpiece from the optimum angle. It has a soft start motor and a variable speed dial, along with a constant speed control circuit to prevent the tool from getting bogged down under load. Designed to offer a long service life and excellent durability, the HM0870C has a service indicator light which comes on to let the user know when the brushes are almost worn out and the tool is due to be serviced. It is supplied with a tube of grease and a carry case for storage. Specifications • Voltage: 240v • Chuck: SDS Max • Modes: Hammer only • Impact energy: 7.6 J • Blows per minute: 1100-2650 bpm • Input wattage: 1100 w • Vibration: Chiselling 11 m/sec² • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 87 dB(A) • Noise sound power: 98 dB(A) • Noise K factor: 3 dB(A) • Net weight: 5.1 - 5.3 kg Features and Benefits • SDS Max demolition hammer • Suitable for all SDS Max chisels • Double Insulated • Variable speed dial • Constant speed under load • Soft start motor • One touch sliding chuck for easy bit installation and removal • LED lamp indicates when to replace carbon brushes • Includes bit grease and carry case Contents • HM0870C SDS Max Demolition Hammer 240v • Bit Grease • Side Handle • Carry Case