Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Specifications • Bore: 20mm • Diameter: 165mm • Kerf: 2.0mm • Rake: 18° • Thickness: 1.25mm • Tooth Count: 40 • Material Type: Wood/Nails • Machine Type: Portable saw Features and Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity

Makita Standard circular saw blades for portable machines. Specifications • Bore (B): 30 mm • Diameter (D): 260 mm • Kerf (K): 2.3 mm • Rake (R): 0° • Thickness (T): 1.8 mm • Tooth Count: 70 • Material Type: Wood/Alu • Machine Type: Mitre Saw Features and Benefits • Ideal for construction, woodworking, carpentry and joinery • Good cutting speed at low cost

Makita ML001G 40v XGT LED Cordless Torch. Maximum run time at 160 Lumens for 45 hours using 4 x 0.5W LEDs. 12 position head with positive stops from 0-170°. Features and Benefits • 0.5W 4 x LED • Max Run Time 55 Hours / 160 Lumens • 12 position head with positive stops from 0-170°

The Makita MAKBLADE Circular Saw Blade is a high-performance accessory designed to deliver precise and clean cuts through various types of wood. Featuring precision-ground teeth, the Makblade ensures smooth and accurate cuts while reducing splintering, making it ideal for hardwood, softwood, plywood, and other wooden materials. Its anti-vibration design minimises noise and vibration, enhancing stability and control for a superior cutting experience. The thin kerf design reduces material wastage and requires less power, improving the efficiency of your cutting tasks. Features and Benefits • Suitable for use with mitre saws and table saws • Carbide tipped for increased efficiency • For sawing wood Specifications • Blade Diameter: 260mm • Tooth Quantity: 60 • Bore Size: 30mm • Kerf Dimension: 2.3mm • Rake Angle: 5° • Quantity: 1

B-49373 Drilling and driving accessory set in plastic carry case. Contents • 19x HSS-TIN Drill Bit: 1, 1.5, 2 (x2), 2.5, 3 (x2), 3.5, 4 (x2), 4.5, 5 (x2), 5.5, 6, 6.5, 7, 7.5, 8mm • 5x Masonry Drill Bit: 4, 5, 6, 7, 8mm • 4x Wood Drill Bit: 4, 5, 6, 8mm • 3x 50mm Phillips Screwdriver Bit: PH1, PH2, PH3 • 3x 50mm Pozi Screwdriver Bit: PZ1, PZ2, PZ3 • 2x 50mm Slotted Screwdriver Bit: SL1.0X5.5, SL1.2X6.5 • 4x 50mm Torx Screwdriver Bit: T20, T25, T30, T40 • 4x 50mm Hex Screwdriver Bit: H3, H4, H5, H6 • 4x 25mm Pozi Screwdriver Bit: PZ0, PZ1, PZ2, PZ3 • 5x 25mm Phillips Screwdriver Bit: PH0, PH1, PH2 (x2), PH3 • 5x 25mm Torx Screwdriver Bit: T10, T15, T20, T25, T30 • 5x 25mm Slotted Screwdriver Bit: SL0.5X3, SL0.5X4, SL0.6X5, SL1.0X6 (x2) • 8x Nut Driver: 5, 5.5, 6, 7, 8, 9, 10, 11mm • 1/2" Countersink • Centre Punch • Magnetic Bit Holder • Plastic Case

The Makita SPECIALIZED Circular Plunge Saw Blade for Wood Cutting is the ultimate choice for precision and efficiency in woodworking projects. Designed to deliver exceptional performance, this high-quality blade is engineered for clean, accurate cuts through a wide range of wood materials. Crafted with ultra-sharp tungsten carbide-tipped (TCT) teeth, this blade ensures durability and long-lasting performance. Its precision-balanced design minimises vibration, providing smoother cuts and greater user comfort. Features and Benefits • For cutting wood • Blade with carbide tips Specifications • Blade Diameter: 160mm • Bore: 20mm • Kerf: 2.2mm • Tooth Count: 48 • Rake Angle: 8°

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 20mm • Diameter: 165mm • Kerf: 2.0mm • Rake: 18° • Thickness: 1.25mm • Tooth Count: 40 • Material Type: Wood/Nails • Machine Type: Portable saw

This is a Makita Mains Adaptor for use with the Makita DMR115 Radio. Specifications • Makita Part Code: SE00000678 • Voltage: 240v • Quantity: 1

The BL1021B Li-ion battery can be used in both Makita 10.8V or 12V Max Li-ion CXT cordless tool range. The BL1021B is equipped with a 4 stage LED battery fuel gauge, battery protection circuit and low temperature performance. Anytime charge, no memory effect and no discharging required. The battery is lightweight and shock absorbing. The Li-ion range delivers up to 430 per cent more working capacity during its lifetime compared to Ni-Cad and is 40 per cent lighter than Ni-MH. The Li-ion range has minimal depletion of power during use or in storage over its lifetime. Features and Benefits • 4 stage LED battery fuel gauge • High battery capacity • Individual cell monitoring • Battery protection circuit • Low temperature performance

The Makita DTP141 is an 18v cordless brushless 4 mode combi drill. With a simple twist of the selection collar the DTP141 can be switched from high power impact driver to percussion drill, then to normal 2-speed drilling and finally into screwdriver mode. This model is a more compact and lightweight design achieved by using BLDC motor and electronic clutch mechanism. Features & Benefits • Single LED work light with pre-glow and afterglow functions • Battery fuel gauge • Ergonomically designed handle • Compact and lightweight design • 4 operation modes for ultimate versatility • Electronic clutch mechanism Specifications • Battery Type: Makita LXT Lithium-Ion • Voltage: 18v • Driving Shank: 6.35mm (1/4”) Hex • Capacity in Steel: 10mm • Capacity in Wood: 21mm • Capacity in Masonry: 8mm • No Load Speed (Drill): 0 – 700 / 0 – 2700rpm • No Load Speed (Percussion): 0 – 700 / 0 – 2700rpm • No Load Speed (Screwdriver): 0 – 300 / 0 – 1100rpm • No Load Speed (Impact): / 0 – 1100rpm / 0 – 2100 / 0 – 2700rpm • Max Torque (Impact): 150Nm Contents • Makita DTP141 18v LXT Cordless Brushless 4 Mode Combi Drill • No Batteries • No Charger • No Case

The RP1111C is a 1/4" Router with a powerful 1,100 watt motor. It features a soft start for smooth start ups, variable speed controlled by dial to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is capable of delivering 8,000 up to 27,500 rpm for the most demanding applications. The RP1111C is equipped with soft grip, trigger switch with lock button for lock on/lock off functions, fine depth adjustment of plunge stroke for precise routing applications, shaft lock mechanism requiring one wrench to change the bits and dust collection system that can be connected to both the upper and lower part of the motor housing. Specifications • Voltage: 110v • Collet Capacity: 1/4" • Input Wattage: 1100 w • Max Plunge Capacity: 57 mm • No Load Speed: 8,000 - 27,500 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 104 dB(A) • Noise Sound Pressure: 93 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 4.4 m/sec² • Net Weight: 3.3 kg Features & Benefits • 8mm collet cone • Anti restart function • Constant speed control • Double Insulation • Dust collection (forced dust collection) • Dust nozzle • Enhanced power supply cord • Fine adjustment of plunge stroke • Lock off / Lock on switch • Rigid aluminium bracket • Shaft lock mechanism • Soft grip • Soft start • Trigger switch • Variable speed control dial Contents • Makita RP1111C 1/4" Plunge Router 110v • Nozzle Assembly • Straight Guide • Accessory Set

The Makita 191J59-9 is a poly coated rebar tie wire for the DTR180 Rebar Tying Tool. Each reel contains approximately 100m of wire and is supplied in boxes of 50 reels. Features & Benefits • Suitable for use with the DTR180 18v LXT Brushless Rebar Tying Tool • 21 gauge diameter wire for maximum strength • Up to 120 ties per wire reel for maximum productivity Specifications • Compatable Machines: DTR180 • Thickness: 21 Gauge (0.8 mm) • Length per Roll: 100 m • Capacity: 120 Ties per Roll • Pack Quantity: 50 Reels