The Makita TW001G XGT 40v Max Brushless 3/4" Drive Impact Wrench is a cordless impact wrench powered by 40Vmax XGT Li-Ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The tool features a trigger switch with full speed mode which can be changed to full speed mode simply by pushing a button. Because in full speed mode the trigger travel is shorter, the full speed is reached faster. The built in LED job light provides optimal vision throughout. Features & Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Ergonomic soft grip • Compact & Lightweight • Electronic 4 stage impact power selection • Auto-stop system available both in forward/reverse rotation modes • Trigger switch with full speed mode Specifications • Battery Type: Makita XGT Li-ion • Battery Voltage: 40v • Nut Busting Torque: 2,050 Nm • Driving Shank: 3/4" Square (C-ring) • Blows per Minute (Max): 0-2,500ipm • Blows per Minute (Hi): 0-2400ipm • Blows per Minute (Med): 0-2200ipm • Blows per Minute (Lo): 0-1900ipm • Standard Bolt: M12-M36 • High Tensile Bolt: M10-M27 • Noise Sound Pressure: 100dB(A) • Noise Sound Power: 111dB(A) • Noise K Factor: 3dB(A) • No Load Speed (Hard/Med/Soft): 0-1,800/1,400/1,150/950rpm • Max Fastening Torque: 1,800Nm • Vibration Fastening Bolt: 18.5m/sec² • Vibration K Factor: 2.0m/sec² • Net Weight: 3.9-4.2kg Contents • Makita TW001G 40v Max XGT Cordless 3/4" Drive Impact Wrench • No Batteries • No Charger • MakPac Type 3 Connector Case • Inner Tray • Belt Clip

The Makita LS0815FLN 216mm Slide Compound Mitre Saw is a cost-effective power tool which features an integrated laser marker. For increased visibility, the saw also features an LED job light. The soft grip handle and sub fence (left side only) ensures comfort and control throughout use. Features & Benefits • Soft start • Soft grip handle • Built in laser guide • LED job light • Sliding sub fence (Left side only) • High cutting capacity • Carrying handle for easy transport • Holder can be attached to both sides of base Specifications • Blade Diameter: 216 mm • Max mitre range: 50 - 60° • Bore Diameter: 30mm • Max bevel range: 48 - -5° • Cut Capacity Mitre 0°, Bevel 0°: 65mm x 305mm • Cut Capacity Mitre 0°, Bevel 45° Left: 50mm x 305mm • Cut Capacity Mitre 0°, Bevel 5° Right: 60mm x 305mm • Cut Capacity Mitre 45°, Bevel 0°: 65mm x 215mm • Cut Capacity Mitre 45°, Bevel 45° Left: 50mm x 215mm • Cut Capacity Mitre 60°, Bevel 0°: 65mm x 150mm • Noise sound pressure: 87 dB(A) • Noise sound power: 110 dB(A) • Noise K factor: 3 dB(A) • Input Wattage: 1400w • No Load Speed: 5000 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 14.1 kg

Compatible with all Makita 18v LXT lithium ion batteries, the DPO600 is a cordless 150mm polisher with a brushless motor and variable speed control. It has two polishing modes: Normal mode features forced rotation of the pad for rough polishing such as surface treatment, and Finishing mode features free rotation of the pad for fine polishing. Features & Benefits • Rotation Mode change: Random orbit with forced rotation mode and Random orbit mode • Normal mode is orbital action with forced rotation of the pad for rough polishing such as surface treatment • Finishing mode is orbital action with free rotation of the pad for fine polishing • Brushless motor • Variable speed trigger and dial • Constant speed control • Soft start • Ergonomic soft grip • Tool can be rested upside down without damaging workpiece thanks to elastomer bumpers • Lock on function • Removable dust covers • Hook and loop pad mounting • 2-Hand grip • Anti-restart function Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Noise sound pressure: 83 dB(A) • Noise sound power: 94 dB(A) • Noise K factor 3 dB(A) • Orbit Diameter: 5.5 mm • Pad Size: 150 mm • Orbits per minute (Normal / Finishing mode): 0 - 6,800 / 0 - 5,200 opm • Strokes per minute (Normal / Finishing mode): 0 - 13,600 / 0 - 10,400 spm • No load speed (Normal / Finishing mode): 0 - 780 / 0 - 600 rpm • Vibration K factor: 1.5 m/sec² • Vibration polishing: 10.0 m/sec² • Net weight: 3.1-3.6 kg Contents • DPO600Z 18v Cordless Polisher (bare tool) • No Battery • No Charger • No Case

The DUH523 is a cordless hedge trimmer with a 520mm blade for gardening. Two-handed safety switches offer added safety and the tool has low noise levels. Vibration-dampened frame. DUH523 Features and Benefits • Anti-vibration structure; 5 cushions to absorb vibration from blade and motor-crank section • Battery protection circuit protects against overloading, over-discharging and over-heating • Electric brake for maximum productivity and increased operator safety • Non-electrolyzed nickel plated blade with anti-abrasion surface • Rubberized soft grip • Tool-less blade change system for extremely quick blade changes DUH523 Specifications • Battery Type: Makita LXT Lithium-ion • Battery Voltage: 18v • Blade Length: 520mm • Cutting Diameter: 15mm • Strokes per Minute: 1350spm The DUR193 is a compact and handy line trimmer for trimming and finishing of gardens and other green spaces. This tool, with a cutting width of 260mm, has a balanced shaft design for added user convenience. Equipped with an adjustable telescopic shaft. DUR193 Features and Benefits • Edger Function • Lightweight for reduced operator fatigue • Redesigned front grip for increased manoeuvrability • Telescopic shaft for optimum cutting position • Well balanced design with fully adjustable features to suit any operator DUR193 Specifications • Battery Type: Makita LXT Lithium-ion • Battery Voltage: 18v • Cutting diameter: 260mm • No Load Speed: 7,800rpm • Nylon Line Diameter: 1.65mm • Shaft Adjustment Range: 190mm Contents • Makita DUH523 18v LXT Cordless Hedge Trimmer 520mm • Makita DUR193 18v LXT Cordless Grass Trimmer 260mm • Makita BL1850B 18v LXT Cordless Li-ion Battery 5ah • Makita DC18RC 18v Li-ion Battery Charger

This Makita cordless LXT tool kit contains a DHP454 Combi Drill and DTD153 Impact driver along with a Type 3 Makpac Connector case and DC18RC compact battery charger. It is available with a choice of either 3.0ah, 4.0ah or 5.0ah batteries. An ideal introduction to the Makita 18v LXT platform, the batteries and charger included with this kit are compatible with a huge range of addtional cordless tools; additionally, Makpac cases can be stacked and connected together to form a streamlined transport and storage solution for all your tools and accessories. Features and Benefits • DHP454 Combi Drill for driving screws and drilling into wood, metal and masonry • DTD153 Impact Driver for high torque fastening applications • Brushless motors for high efficiency and extended runtimes • Both machines have LED worklights for increased visibility in dark jobsite environments • Stackable Makpac Connector case for transport and storage Contents • DHP484 18v Combi Drill • DTD153 18v Impact Driver • 2x 5.0ah Li-ion Batteries • DC18RC Compact Charger • Makpac Connector Case (Type 3)

The HR007G is a brushless Rotary Hammer, adapted for SDS Plus bits, powered by a 40v Max Li-ion XGT slide type battery. It features variable speed controlled by trigger to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. Features & Benefits • 3 mode operation: Rotation only, Rotation + Hammering, Hammering only • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti vibration housing and AVT for reduced operator fatigue • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Brushless motor • Constant speed control • Electric brake • Electric brake • LED job light • Reversing switch • The dust extractor automatically runs while the switch is on • Torque limiter • Trigger lock • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blows per Minute: 0-5,000bpm • Impact Energy: 3.0j • Max. Diameter in Concrete (Diamond Core): 65mm • Max. Diameter in Concrete (TCT Bit): 54mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 32mm • No Load Speed: 0-980rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 105 dB(A) • Noise Sound Pressure: 94 dB(A) • Shank: SDS Plus • Vibration (Chiselling): 8.6m/sec² • Vibration (Drilling into Metal): 2.8m/sec² • Vibration (Hammer Drilling): 7.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.8-4.8kg Contents • HR007G 40v Max XGT Cordless SDS Plus Rotary Hammer Drill • Cloth • Grease Vessel • Depth Gauge • Air Duct Cap • No Batteries • No Charger • No Case

The Makita DTW1001 is a cordless Impact Wrench powered by 18v Lithium-ion battery, with variable speed control by trigger, to deliver up to 2,200ipm, 1,800rpm and up to 1,050Nm of maximum tightening torque. The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life and is electronically controlled to optimise battery energy use for up to 50 percent longer run time per charge. Features & Benefits • Extra high max tightening torque • Brushless motor • Electric brake • Variable speed control by trigger • Forward/reverse rotation • Twin LED job light with afterglow • Electronic 3-stage impact power selection (Hard/Medium/Soft) • Compact and lightweight design • Best possible ergonomic handle Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium-ion • Driving Shank: 3/4" Square • Impacts per Minute: 0-1,800/2,000/2,200ipm • Max Fastening Torque Impact Drill: 300/600/1,050Nm • No Load Speed: 0-900/1,000/1,800rpm • Nut Busting Torque: 1,700Nm • Product Dimensions: 229x91x289mm • Sound Noise Uncertainty (K Factor): 3dB(A) • Sound Power Level: 109dB(A) • Sound Pressure Level: 98dB(A) • Tightening Capacity Standard Bolt: M12-M30 • Vibration Level Fastening Bolt: 15.5m/s² • Vibration Uncertainty (K Factor): 2.0m/s² • Weight: 3.4-3.7kg Contents • Makita DTW1001 18v LXT Cordless Brushless 3/4" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

Makita 10 Piece Diamond Core Drill Bit Set, suitable for cutting granite, marble, limestone, slate, hard bricks and other dense and non-abrasive materials. Can be used with dust extraction. Superb value for money for the professional user whose main concern is a fast cut. Features and Benefits • Suitable for cutting, Granite, marble, limestone, slate, hard bricks and other dense and non-abraive materials • Encompasses the industries most popular core sizes • Laser welded diamond cores are designed for fast and easy drilling, in the most demanding of situations Contents • Aluminium carry case • 5 x Diamond core drills 38mm, 52mm, 65mm, 117mm & 127mm • 1 x Hexagon adaptor P-34562 • 1 x SDS adaptor P-30031 • 1 x Drift key P-57261 • 1 x Barrel extension 150mm P-57261 • 1 x 'A' taper pilot drill 10mm x 255mm P-74706

Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Specifications • Bore: 30mm • Diameter: 235mm • Kerf: 2.3mm • Rake: 23° • Thickness: 1.6mm • Tooth Count: 24 • Material Type: Wood/Nails • Machine Type: Portable saw Features and Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity

Crafted for durability and precision, the Makita 2 Cutter SDS Max Masonry Drill Bit excels in drilling through tough materials such as concrete and stone. The Makita 2 Cutter SDS Max Drill Bit features a robust carbide tip and a reinforced flute design, ensuring superior performance and extended lifespan. Its SDS Max shank provides a secure grip and efficient power transmission in compatible rotary hammers, allowing for fast and accurate drilling. Features & Benefits • Ideal for use in concrete and stone • Durable tungsten carbide tip • 2-cutter • For SDS-MAX hammers Specifications • Diameter: 22mm • Working Length: 400 • Overall Length: 540 • Quantity: 1

The Mforce has a revolutionary advanced tooth design that sets a new benchmark for blade technology. The dual bevelled tooth face has sharper cutting edges and the "M" shape is like doubling the tooth count per blade. A greater wear area and more cutting surfaces means the MForce blade will last up to 2 x longer than traditional blades. A narrow kerf and plate reduce friction allowing for a lighter feed pressure, protecting the motor of your saw. Features & Benefits • Twice the finish with half the teeth • Aggressive cutting • Greater wear area • Longer lasting Specifications • Bore: 30mm • Diameter: 235mm • Kerf: 2.3mm • Rake: 15° • Thickness: 1.6mm • Tooth Count: 40 • Material Type: Wood • Machine Type: Portable Saw

The Makita SDS Max Angled Tile Chisel is designed for users who demand precision and efficiency in tile removal. Engineered to handle the toughest jobs, this high-quality chisel is an essential accessory for your demolition and renovation projects. The angled design of the chisel allows for better leverage and access to tight spaces, making it ideal for removing tiles, adhesives, and other materials from floors and walls. Features & Benefits • Angled design • SDS MAX shank • Durable construction Specifications • Length: 300mm • Width: 50mm • Quantity: 1