The Makita DTW300 Brushless LXT 1/2" Impact Wrench is ideal for automotive, installation and fabrication trades. Combining extended run time and speed control for unmatched fastening performance. It is powered by a Makita built brushless motor for longer run time. Precise fastening control is achieved through the 4 speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto stop modes offer increased efficiency when the fastener is adequately loosened. The full speed mode function reduces the trigger pull to reach full speed. Features & Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Electronic 4 stage impact power selection • Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button • Auto stop system available both in forward/reverse rotation modes Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Blows per Minute (Max/Hi/Med/Lo): 0-4,000/3,400/2,600,1,800ipm • Driving Shank: 1/2" Square • High Tensile Bolt: M10-M16 • Max. Fastening Torque: 330Nm • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 108dB(A) • Noise Sound Pressure: 97dB(A) • Nut Busting Torque: 580Nm • Standard Bolt: M10-M20 • Vibration Fastening Bolt: 12.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.5-1.8kg Contents • DTW300 18v LXT Cordless Brushless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

Part of Makita's 18v LXT cordless range, the DUB185 is a compact and lightweight blower which can also be used as a vacuum cleaner if a suitable dust bag is attached (not included). Designed to offer increased air volume compared to previous models, the DUB185 has three air volume settings and a variable speed trigger for maximum control. This is a bare tool which is supplied without a battery or charger. It can be used with any Makita 18v LXT lithium ion power tool battery. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • No Load Speed: 0 - 18,000 rpm • Air Volume Settings: 3 • Vacuum Function: Yes • Max air velocity: 98 m/sec • Max air volume: 3.2 m³/min • Max Sealed Suction: 5.8 kPa • Noise sound pressure: 83 dB(A) • Noise sound power: 94 dB(A) • Noise K factor: 3 dB(A) Features and Benefits • Cordless Jobsite / Workshop blower • Variable speed control by trigger • 3 air volume settings: Low, Medium, High • Increased air volume • Compact and lightweight design • Ergonomic soft grip • Vacuum function - can be used as a vacuum with a dust bag (not included) Contents • DUB185Z 18v Cordless Blower (Bare Tool) • No Battery • No Charger • No Case

Makita have developed these moulded inner trays to allow you to securely store your tools in the Makpac cases Fits: Makita Type 3 Case and Type 2 Case , Compatable For 4 x 18v batteries and one double charger Please note the image is a Generic Picture and not one of the actual item

The LS0714LN sliding mitre saw was developed based on the LS0713, but designed as a cost effective alternative by removing the Soft Start and Constant Speed functions. It is a more advanced version compared to the original LS0714 as it is also fitted with a laser guide for rapid, accurate positioning of the cut line. Designed for ease of portability, the LS0714LN is lightweight at 13.5kg and can be easily lifted and carried between locations. It uses 190mm blades and has a cut capacity of 52mm x 300mm at 90°. Features & Benefits • Sliding compound mitre saw • Available in 110v or 240v • Lightweight at 13.5kg for ease of lifting • Double Insulation • Built-in dust collection system • Bevel cutting Left 45 degrees, right 5 degrees • Laser guide • Includes material supports, clamp and dust bag Specifications • Input Wattage: 1010 w • Blade Diameter: 190 mm • Bore Diameter: 20 mm • Max mitre range: 57 - 47° • Max Cut Capacity at 90°: 52mm x 300mm • Max Cut Capacity at 45°: 52mm x 212mm • Max bevel range: 45: 5° • No Load Speed: 6000 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net Weight: 13.5 kg Contents • LS0714LN Sliding Compound Mitre Saw 110v • Circular Saw Blade 190mm • Clamp • Dust Bag

The LS0714LN sliding mitre saw was developed based on the LS0713, but designed as a cost effective alternative by removing the Soft Start and Constant Speed functions. It is a more advanced version compared to the original LS0714 as it is also fitted with a laser guide for rapid, accurate positioning of the cut line. Designed for ease of portability, the LS0714LN is lightweight at 13.5kg and can be easily lifted and carried between locations. It uses 190mm blades and has a cut capacity of 52mm x 300mm at 90°. Features & Benefits • Sliding compound mitre saw • Available in 110v or 240v • Lightweight at 13.5kg for ease of lifting • Double Insulation • Built-in dust collection system • Bevel cutting Left 45 degrees, right 5 degrees • Laser guide • Includes material supports, clamp and dust bag Specifications • Input Wattage: 1010 w • Blade Diameter: 190 mm • Bore Diameter: 20 mm • Max mitre range: 57 - 47° • Max Cut Capacity at 90°: 52mm x 300mm • Max Cut Capacity at 45°: 52mm x 212mm • Max bevel range: 45: 5° • No Load Speed: 6000 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net Weight: 13.5 kg Contents • LS0714LN Sliding Compound Mitre Saw 240v • Circular Saw Blade 190mm • Clamp • Dust Bag

The Makita AN613 is a pneumatic coil nail gun powered by normal pressure air and designed to comply with ISO and other standards. With a built in air duster which helps clean dust and debris off floors and other surfaces. The AN613 is ideal for sub-floor framing, exterior nailing, interior nailing, siding and framing. Features & Benefits • Ergonomic soft grip • Tool-less depth adjustment • Contact trip and sequential shot selection • Joist hook • One-touch magazine opener • Compact and lightweight • 360 degree exhaust • Rubber bumpers protect work surface and tool Specifications • Nail Gauge: 2.3 – 2.5mm • Nail Length: 38 – 65mm • Operating Pressure (psi): 70 – 120 psi • Operating Pressure (bar): 4.9 – 8.2 bar • Magazine Capacity: 200 - 300 • Noise Sound Power: 130.6dB(A) • Noise Sound Pressure: 116.3dB(A) • Noise K Factor: 1.5dB(A) • Net Weight: 2.2kg Contents • Makita AN613 Coiled Air Nail Gun • Safety Glasses • Oil Supply • Nose Adaptor • Hose Wrench • Hook

The Makita DBS180Z is a 9mm cordless belt sander powered by 18v LXT Li-on Battery. Features & Benefits • Brushless motor • Electric Brake • LED job light • Variable speed control • Connectable to dust extractor with correct attachment • Adjustable sanding arm pivots up to 160° for compact storage • Anti-start-up during storage: DBS180 will not start if the sanding arm is folded over 90° • Lock on function • High Power output Specifications • Belt size: 9x533mm • Noise Sound pressure: 77 dB(A) • Noise K Factor: 3 dB(A) • Belt Speed: 600-1,700m/min • Vibration K Factor: 1.5m/sec² • Vibration:Standing: 2.5m/sec² • Net Weight: 1.8-2.1kg Contents • Makita DBS180 18v LXT Cordless Brushless Belt Sander • 2 x 9mm x 533mm Sanding Belts • Grip Assembly • No Battery • No Charger • No Case

The Makita DCE090 is a 230mm cordless power cutter powered by two 18V LXT Li-Ion batteries to supply energy to the powerful 36V DC motor drive system. The Active Feedback Sensing Technology shuts down the tool if the rotation speed suddenly slows down. Specifications • Battery Type: Lithium-ion • Max. Cutting Depth: 88 mm • Bore (B): 22.23 mm • Max Wheel Thickness: 3.0 mm • Noise sound pressure: 103 dB(A) • Noise sound power: 114 dB(A) • Noise K factor: 3 dB(A) • Max Wheel Diameter: 230 mm • No Load Speed: 6,600 rpm • Net weight with pipes: 5.6 - 6.3 kg Features and Benefits • Electric brake • Soft start • LED work light • Overload indicator lamp • Kick-off button for safe operation • Water supply kit can be connected Contents • Makita DCE090ZX1 Brushless Disc Cutter • Water Pipe Connector • Spanner • Allen Key • 1 x E-03006 Cut off Wheel • No Batteries • No Charger • No Case

The Makita DC0181Z is a cordless Cut out Tool that is designed to be transported around the site easily making outlet holes in drywall at construcion sites due to its cordless nature. It is compatible with the full range of 18v Li-on slide on batteries from 1.5ah-5ah. Features & Benefits • Barrel Handle with ribbed soft grip for comfort and sustainablity • Compact & Lightweight • Electronic Current Limiter • High Rotation Speed for fast cutting Specifications • Power Supply: Cordless • Range: Makita 18v Li-on LXT • Voltage: 18v • Buying option: Body only • Collet Capacity: 1/8” or ¼” • Stroke Length: 9.2 - 31 mm • Noise sound pressure: 78 dB(A) • Noise K factor: 3 dB(A) • Maximum Output: 600 w • No Load Speed: 32,000 rpm • Vibration K factor: 1.5m/sec Contents • Makita DCO181Z 18v LXT Cordless Brushless Drywall Cutter • Drywall guide tip bit • Wrench • Collet Cone • No Battery • No Charger • No Case

The DHR202 is a 3 mode SDS Plus rotary hammer drill which is powered by Makita 18v LXT lithium-ion batteries. Features & Benefits: • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow • One-touch sliding chuck for easy bit changes • Triple operation mode: Rotary only, hammer only and rotary hammer • Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions Specifications: • Compatible battery type - Lithium-ion • Voltage - 18 v • Max in concrete - 20 mm • Max. in steel - 13 mm • Max. in wood - 26 mm • Impact energy - 2.0 J • Blows per minute - 0-4000 bpm • Noise sound pressure - 87 dB(A) • Noise sound power - 98 dB(A) • Noise K factor - 3 dB(A) • No Load Speed - 0 - 1100 rpm • Vibration: Drilling - 3 m/sec² • Vibration K factor - 1.5 m/sec² • Vibration: Hammer Drilling - 14.5 m/sec² • Vibration: Chiselling - 11 m/sec² • Net weight - 3.2 kg Contents • Makita DHR202RTJ 18v Cordless LXT SDS Hammer Drill • 2 x 5ah Makita LXT Lithium-Ion Batteries • DC18RC Compact Charger • Makpac Connector Case (Type 3) • Inner Tray • Side Handle • Depth Stop

The DHR202 is a 3 mode SDS Plus rotary hammer drill which is powered by Makita 18v LXT lithium-ion batteries. Features & Benefits: • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow • One-touch sliding chuck for easy bit changes • Triple operation mode: Rotary only, hammer only and rotary hammer • Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions Specifications: • Compatible battery type - Lithium-ion • Voltage - 18 v • Max in concrete - 20 mm • Max. in steel - 13 mm • Max. in wood - 26 mm • Impact energy - 2.0 J • Blows per minute - 0-4000 bpm • Noise sound pressure - 87 dB(A) • Noise sound power - 98 dB(A) • Noise K factor - 3 dB(A) • No Load Speed - 0 - 1100 rpm • Vibration: Drilling - 3 m/sec² • Vibration K factor - 1.5 m/sec² • Vibration: Hammer Drilling - 14.5 m/sec² • Vibration: Chiselling - 11 m/sec² • Net weight - 3.2 kg Contents • Makita DHR202RT1J 18v Cordless LXT SDS Hammer Drill • 1 x 5ah Makita LXT Lithium-Ion Battery • DC18RC Compact Charger • Makpac Connector Case (Type 2) • Inner Tray • Side Handle • Depth Stop

The Makita DHR242 18v LXT Cordless SDS Drill is a high-quality and powerful rotary hammer that is designed to make drilling tasks quick and easy. With its high performance and versatile design, it's perfect for both professional contractors and DIY enthusiasts. This rotary hammer is powered by Makita's LXT technology, which delivers superior power and performance. It features a brushless motor that provides efficient and powerful performance while ensuring a longer lifespan than traditional brushed motors. The DHR242RTJW Rotary Hammer LXT is designed for versatility, with three different modes of operation: rotary drilling, hammer drilling, and chiselling. This makes it ideal for a wide range of drilling tasks, from drilling through concrete to removing tiles and breaking up concrete. It features an ergonomic handle that provides a comfortable and secure grip, reducing operator fatigue during extended use. It also has an LED work light that illuminates the work area, making it easier to see what you're working on. Features & Benefits • Brushless maintenance-free and long-life motor • Ergonomic handle • Three different modes of operation (Rotary drilling, hammer drilling and chiselling) • Variable speed • Torque limiter Specifications • Battery Type: Makita LXT Lithium-Ion • Voltage: 18v • Max Drilling Diameter in Concrete: 24mm • Max Drilling Diameter in Wood: 27mm • Max Drilling Diameter in Steel: 13mm • Impact Energy: 2J • Sound Power Level: 101dB(A) • Product Dimensions (L x W x H): 328 x 85 x 213mm Contents • Makita DHR242 18v LXT Cordless SDS Drill • Dust Extraction System DX06 • 2 x 5ah Makita LXT Lithium-Ion Batteries • DC18RC LXT Charger • Makpac Case • Depth Gauge • Sealing Cap • LXT Battery Cover