The Makita DTW251 LXT 1/2" Impact Wrench has a compact, lightweight design and a powerful 4 pole motor. With a conveniently located push-button for forward and reverse options. The body is fitted with an ergonomic soft grip, ideal for prolonged use and less user fatigue. There is also an LED job light with afterglow for working in dark spaces. Features & Benefits • 1/2" drive • 4 pole motor • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Drive Square: 1/2" • Impacts: 0-3,200ipm • Max. Torque: 230Nm • No Load Speed: 0-2,100rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 101dB(A) • Noise Sound Pressure: 90dB(A) • Vibration Fastening Bolt: 9.0m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.7kg Contents • DTW251 18v LXT Cordless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

Part of the 12v CXT cordless platform, the PV301D is a compact sander and polisher which can run on any Makita 12v CXT battery. It has a brushless motor and two speed settings, with variable speed control and a lock on switch. The tool is restart protected so it won't start up unexpectedly if the switch is left in the "on" position while changing over a battery. Features & Benefits • Variable speed control • Mechanical 2-speed control • Constant speed control • Brushless motor • Trigger lock • Lock-on switch to reduce user fatigue • Anti-restart function • Ergonomic soft grip Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Pad/Disc Diameter (Hook & Loop type): 80 mm • Pad/Disc Diameter (Twist on/off type): 50 mm • Backing Pad Diameter (Hook & Loop type): 75 mm • Backing Pad Diameter (Twist on/off type): 46 mm • No Load Speed (Sanding): 0 - 9500 rpm • No Load Speed (Polishing): 0 - 2800 rpm • Vibration K factor: 1.5 m/sec² • Vibration: Sanding: 2.5 m/sec² • Noise sound pressure: 73 dB(A) • Noise K factor: 3 dB(A) • Net weight: 1.1 - 1.2 kg Contents • Makita PV301D 12v Max CXT Cordless Brushless Sander Polisher • Side handle • Pad • Adaptor • Wool pad • Sponge pad • No Battery • No Charger • No Case

The Makita TD111D, a 12v CXT impact driver with a brushless motor, delivers an outstanding 135Nm of tightening torque yet weighs just 1.1kg, with an overall length of only 135mm from chuck to back of body. It will deliver up to 3,900 impacts per minute in high-mode with the capacity to drive home an M14 bolt. This compact machine features Makita's A-mode impact operation, which drives fasteners slowly to begin with until the thread tightening reacts when the full power is switched on to drive the fastener home. This mode eliminates screw cam-out and cross threading which causes the fixing to fail. In addition, the TD111D has a variable speed trigger, electric brake, soft grip handle and LED job light. The TD111D is available with charger and two 2.0Ah batteries in a Makpac connector case, or as a body only machine for users who do not require them. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Drive shank: Hex 1/4 " • Standard Bolt: M5-M14 • High Tensile Bolt: M5-M12 • Machine Screw: M4-M8 • Coarse thread (length): 22 - 90 mm • Max Torque: 135 Nm • Blows per Minute (Hi): 0 - 3900 ipm • Blows per Minute (Lo): 0 - 1600 ipm • No Load Speed (Hi): 0 - 3000 rpm • No Load Speed (Lo): 0 - 1300 rpm Features and Benefits • New A-mode: helps to eliminate cam-out & cross threading • Variable speed • Electric brake • Forward/reverse rotation • LED job light • Compact design with overall length of 135mm • Brushless motor • Ergonomic soft grip • Two selectable Impact Modes (High/Low) • Belt clip Contents • TD111DSAJ Cordless CXT Impact Driver • BL1020B 2.0ah Li-ion Battery (x2) • Battery Charger • Screwdriver Bit • Makpac Connector Case

The GA5021C angle grinders have been developed as the most advanced models of the Makita GA5010 series. The electronic control system provides constant speed control, soft start, current limiter, anti-restart protection and an LED power light. The Super Joint System (SJS) reduces vibration and helps to ensure greater user safety and longer tool lifetime, while the large trigger provides ergonomic control. Makita’s Super Joint System was introduced to help prevent damage to the tool and protect the user from injury. SJS is a mechanical clutch system that features a coil spring wrapped around the internal drive spindle. The coil tightens around the spindle when the machine is started, to deliver the motor’s power smoothly and efficiently to the drive shaft or spindle. If the blade jams in the material being cut, it can potentially overload the motor, but Makita’s SJS instantly disengages the drive to the disc and the drive spindle rotates freely, before engaging again to reduce the risk of gearbox damage and injury to the operator. Features & Benefits • Corded 125mm angle grinder • Soft start motor • Electronic current limiter • LED power light • Restart protected • Constant speed control for consistent performance under load • SJS system helps to improve user safety and prevent damage to the tool • Large, comfortable trigger • Brushes can be easily accessed via the side of the housing Specifications • Input Wattage: 1450w • Max Wheel Diameter: 125mm • Bore Diameter: 22mm • Spindle Size: M14 x 2mm • No Load Speed: 10000 rpm • Noise Sound Pressure: 90dB(A) • Noise Sound Power: 101dB(A) • Noise K Factor: 3dB(A) • Net Weight: 2.9-4.1kg Contents • GA5021C Angle Grinder 110v • Grinding Disc • Protective Guard • Spanner • Side Handle

The GA5021C angle grinders have been developed as the most advanced models of the Makita GA5010 series. The electronic control system provides constant speed control, soft start, current limiter, anti-restart protection and an LED power light. The Super Joint System (SJS) reduces vibration and helps to ensure greater user safety and longer tool lifetime, while the large trigger provides ergonomic control. Makita’s Super Joint System was introduced to help prevent damage to the tool and protect the user from injury. SJS is a mechanical clutch system that features a coil spring wrapped around the internal drive spindle. The coil tightens around the spindle when the machine is started, to deliver the motor’s power smoothly and efficiently to the drive shaft or spindle. If the blade jams in the material being cut, it can potentially overload the motor, but Makita’s SJS instantly disengages the drive to the disc and the drive spindle rotates freely, before engaging again to reduce the risk of gearbox damage and injury to the operator. Features & Benefits • Corded 125mm angle grinder • Soft start motor • Electronic current limiter • LED power light • Restart protected • Constant speed control for consistent performance under load • SJS system helps to improve user safety and prevent damage to the tool • Large, comfortable trigger • Brushes can be easily accessed via the side of the housing Specifications • Input Wattage: 1450w • Max Wheel Diameter: 125mm • Bore Diameter: 22mm • Spindle Size: M14 x 2mm • No Load Speed: 10000 rpm • Noise Sound Pressure: 90dB(A) • Noise Sound Power: 101dB(A) • Noise K Factor: 3dB(A) • Net Weight: 2.9-4.1kg Contents • GA5021C Angle Grinder 240v • Grinding Disc • Protective Guard • Spanner • Side Handle

The Makita DTW300 Brushless LXT 1/2" Impact Wrench is ideal for automotive, installation and fabrication trades. Combining extended run time and speed control for unmatched fastening performance. It is powered by a Makita built brushless motor for longer run time. Precise fastening control is achieved through the 4 speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto stop modes offer increased efficiency when the fastener is adequately loosened. The full speed mode function reduces the trigger pull to reach full speed. Features & Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Electronic 4 stage impact power selection • Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button • Auto stop system available both in forward/reverse rotation modes Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Blows per Minute (Max/Hi/Med/Lo): 0-4,000/3,400/2,600,1,800ipm • Driving Shank: 1/2" Square • High Tensile Bolt: M10-M16 • Max. Fastening Torque: 330Nm • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 108dB(A) • Noise Sound Pressure: 97dB(A) • Nut Busting Torque: 580Nm • Standard Bolt: M10-M20 • Vibration Fastening Bolt: 12.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.5-1.8kg Contents • DTW300 18v LXT Cordless Brushless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

Lightweight and shock-absorbing, the Li-ion battery range delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH. A Makita Li-ion battery has minimal depletion of power during use or in storage over it's lifetime. This battery dual pack includes two Makita BL1850B 18v 5.0ah batteries with LED indicators and is compatible with all tools from the 18v LXT cordless range. Specifications • Voltage: 18v • Capacity: 5.0 Ah • Battery Type: Li-ion • Battery ID: BL1850B Features and Benefits • Unbeatable 45 minute charge time • LED charge indicator on battery • Same weight as 3.0Ah battery • Works with your current Li-ion Chargers • Longer run time and battery life Contents • Two BL1850B 5.0ah Batteries

The DCS552 is part of Makita's 18v LXT cordless system. It is a 136mm (5/3/8") metal cutting circular saw with a built in chip/dust collector and an LED worklight. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade Diameter: 136mm • Max Cut @ 0°: 50.5mm • Bore Diameter: 20mm • Noise sound pressure: 102 dB(A) • Noise sound power: 113 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 3,600 rpm • Vibration K factor: 1.5 m/sec² • Vibration (Cutting Metal): 2.5 m/sec² • Net weight: 2.4 - 2.7 kg Features and Benefits • Electric brake • LED job light • Built-in dust collection system • Chips & dust disposed simply by removing dust cap • Stainless steel base plate • Heavy gauge, precision machined base • Compact and lightweight design • Large view window allows easy cutting along cut line • Flat motor housing end • On-tool storage for hex wrench • Conveniently located shaft and lock for easy blade replacement • Lock-off lever helps prevent accidental starts Contents • DCS552RTJ Cordless Metal Cutting Circular Saw • TCT Saw Blade • Hex Key • Safety Goggles • No Battery • No Charger • No Case

Features and Benefits• Double Insulated for Safety• Soft StartSpecifications• Wheel size: 230mm • Bore Size: 22mm • Spindle size: M14 x 2mm • No Load Speed: 6600rpm • Input wattage: 2,400w• Net Weight: 5.6kgIncludes:• Lock Nut Wrench• Anti Vibration Side Handle• Wheel Guard

Features and Benefits• Double Insulated for SafetySpecifications• Wheel size: 230mm • Bore Size: 22mm • Spindle size: M14 x 2mm • No Load Speed: 6600rpm • Input wattage: 2,400w• Net Weight: 5.6kgIncludes:• Lock Nut Wrench• Anti Vibration Side Handle• Wheel Guard

The Makita DHR171 is designed for ease of use with a one touch sliding chuck and variable speed control. This 17mm cordless rotary hammer drill will drill through concrete up to 17mm, steel up to 10mm and wood up to 13mm. The brushless motor is precision engineered to be up to 50% more efficient than a comparative model. This means a fully charged 18v lithium-ion battery will last almost twice as long as a product running on a standard motor. With its compact design and vibration absorbing housing the DHR171 is lightweight at only 2.8kg net and being powered by an 18v LXT Li-ion battery means the DHR171 is cross compatible with the entire Makita LXT battery range. Features & Benefits • Brushless motor • One touch sliding chuck for easy bit installation and removal. • 2-mode operation: Rotary only and Rotary hammer • Electric brake • Variable speed control by trigger • Constant speed control • Forward/reverse rotation • LED job light • Compact and lightweight design • Vibration absorbing housing Specifications • Battery Type: Lithium-ion • Voltage: 18v • Capacity in Concrete: 17mm • Capacity in Steel: 10mm • Capacity in Wood: 13mm • Impact energy: 1.2J • Shank: SDS Plus • Impacts per Minute: 0-4,800ipm • Noise sound pressure: 86dB(A) • Noise sound power: 97dB(A) • Noise K factor: 3dB(A) • No Load Speed: 0-680rpm • Vibration K factor: 1.5m/sec² • Vibration: Hammer Drilling: 9.0m/sec² • Vibration: Drilling into metal: 2.5m/sec² • Net weight: 2.8kg Contents • Makita DHR171RTJ 18v LXT Cordless Brushless SDS Hammer Drill • No Batteries • No Charger • No Case • Side Handle • Depth Stop

The HR2631F is an SDS Plus drill which features Makita's AVT anti-vibration technology. It has three modes for drilling, hammer drilling or chiselling, and chisels can be installed in one of 40 different positions for engaging the work at the optimum angle. Compact and lightweight, it has a torque limiter for safety, comfortable rubberised handle, a variable speed trigger and an LED worklight. The design is more or less identical to the preceding model HR2611F, with the exception of the mode change lever which can now be operated without needing to rotate the chuck. Features & Benefits • Anti vibration technology • LED job light • Modified operation-mode change lever • Modes can now be changed without rotating the chuck • 3 mode operation: Rotation only / Rotation with hammering / Hammering only • One touch sliding chuck for easy bit installation and removal • Variable speed control by trigger • Forward / reverse rotation • Torque limiter • Double Insulation • 40 different bit angle settings • Compact and lightweight design • Depth stop • Ergonomic rubberised soft grip handle Specifications • Input Wattage: 800w • Impact Energy: 2.4J • No Load Speed: 0-1,200rpm • Optimum Drilling Range: 4-18mm • Max in Concrete (TCT Bit): 26mm • Max in Concrete (TCT Core): 68mm • Max in Concrete (Diamond Core): 80mm • Max in Wood: 32mm • Max in Steel: 13mm • Impacts per Minute: 0-4,600ipm • Vibration Chiselling: 9.0m/sec² • Vibration Hammer Drilling: 12.0m/sec² • Noise Sound Pressure: 90dB(A) • Noise K Factor: 3dB(A) • Noise Sound Power: 101dB(A) • Net Weight: 2.9-3.4kg Contents • Makita HR2631F SDS Plus Hammer Drill 110v • Side Handle • Depth Stop • Carry Case