Makita Inlay. Please note image is a generic stock photo for illustration purposes only; refer to the model number and description to ensure the inlay is correct for your requirements. Contents DDA340/DDA341/DDA350/DDA351 Angle Drill moulded inlay

Makita Inlay. Please note image is a generic stock photo for illustration purposes only; refer to the model number and description to ensure the inlay is correct for your requirements.

Makita Inlay. Please note image is a generic stock photo for illustration purposes only; refer to the model number and description to ensure the inlay is correct for your requirements.

Makita Inlay. Please note image is a generic stock photo for illustration purposes only; refer to the model number and description to ensure the inlay is correct for your requirements. Contents DGA513/DGA463 Grinder moulded inlay

Makita Inlay. Please note image is a generic stock photo for illustration purposes only; refer to the model number and description to ensure the inlay is correct for your requirements. Contents Makita 8381826 Stackable Case Inlay for DHS680 Circular Saw Plastic inlay

Makita's DGA504Z is a cordless angle grinder which runs on 18v lithium ion batteries (not included). For maximum efficiency it is equipped with an enhanced brushless high power motor and utilizes a built-in controller to regulate the rotation speed according to load condition; this enables greater application of torque during cutting tasks and higher speeds for less demanding applications such as light grinding and surface preparation.The DGA504Z also has a buil-in tool and battery protection system which shuts down the motor if excessive heat or current draw is detected. An illuminated panel on the base of the handle displays battery charge, speed control and overload protection status. An XPT (Extreme Protection Technology) machine, the grinder is designed to withstand the tough conditions of jobsite environments and has a rubberised soft grip and anti-vibration side handle for comfortable operation in day to day use.Features and Benefits• Automatic Speed Control: Automatically changes the speed according to load condition• High power motor• Anti-restart function• Soft start• Battery fuel gauge• Rubberised soft grip• Electronic current limiter for overload protection• Slide switch conveniently located for one hand operationSpecifications• Battery Type: Lithium Ion• Voltage: 18v• Bore Diameter: 22.23mm• Max Wheel Diameter: 125mm• Max Disc Thickness: 6mm• Noise Sound Pressure: 79 dB(A)• Noise K factor: 3 dB(A)• Vibration K Factor: 1.5 m/sec²• Vibration: Surface Grinding: 6.0 m/sec² • No Load Speed: 8,500 rpmIncludes:• Disc guard• Side handle• No Battery• No Charger

Makita's DTD152 is a cordless 18v impact driver with a high rotation speed for rapid work rate. Equipped with twin LED job lights for optimum visibility and designed to a compact and lightweight specification, this 1.5kg tool is ideal for confined workspaces and is fitted with a belt hook for hands free portability. Powered by Makita's class leading 18v lithium ion battery system, the DTD152's powerful motor drives an impact mechanism delivering up to 3500ipm and a turning force of up to 165Nm while a maximum no load speed of 2900rpm delivers efficient driving and fastening performance. An ergonomic soft grip construction provides a secure hold and ensures the tool remains comfortable to use for extended periods of operation. Features & Benefits • Compact and lightweight design • Variable speed control by trigger • Forward/reverse rotation • Twin LED job light • Electric brake • High rotation speed • One-touch bit installation • Ergonomic soft grip Specifications • Battery Type: Lithium-ion • Voltage: 18v • Standard Bolt: M5-M16 • High Tensile Bolt: M5-M12 • Coarse thread (length): 22 - 125 mm • Max Fastening Torque: 165 Nm • No Load Speed: 0 - 2900 rpm • Vibration: Fastening Bolt: 10.5 m/sec² • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 93 dB(A) • Noise sound power: 104 dB(A) • Noise K factor: 3 dB(A) • Driving Shank: 6.35mm (1/4") Hex • Machine Screw: M4-M8 • Impacts per Minute: 0 - 3,500 ipm • Net weight: 1.5 kg Contents • No Battery • No Charger

The Makita DTW1001 is a cordless Impact Wrench powered by 18v Lithium-ion battery, with variable speed control by trigger, to deliver up to 2,200ipm, 1,800rpm and up to 1,050Nm of maximum tightening torque. The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life and is electronically controlled to optimise battery energy use for up to 50 percent longer run time per charge. Features & Benefits • Extra high max tightening torque • Brushless motor • Electric brake • Variable speed control by trigger • Forward/reverse rotation • Twin LED job light with afterglow • Electronic 3-stage impact power selection (Hard/Medium/Soft) • Compact and lightweight design • Best possible ergonomic handle Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium-ion • Driving Shank: 3/4" Square • Impacts per Minute: 0-1,800/2,000/2,200ipm • Max Fastening Torque Impact Drill: 300/600/1,050Nm • No Load Speed: 0-900/1,000/1,800rpm • Nut Busting Torque: 1,700Nm • Product Dimensions: 229x91x289mm • Sound Noise Uncertainty (K Factor): 3dB(A) • Sound Power Level: 109dB(A) • Sound Pressure Level: 98dB(A) • Tightening Capacity Standard Bolt: M12-M30 • Vibration Level Fastening Bolt: 15.5m/s² • Vibration Uncertainty (K Factor): 2.0m/s² • Weight: 3.4-3.7kg Contents • Makita DTW1001 18v LXT Cordless Brushless 3/4" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

The Makita DTW1002 is a 1/2" drive high torque cordless impact wrench powered by an 18v lithium-ion battery. Delivering up to 1,000Nm of turning force for tightening applications, the DTW1002 is also adept at loosening when in reverse rotation mode, generating enough nut busting torque to shift fasteners that have been tightened to 1,600Nm. It has 3 impact power modes for selecting between hard, medium and soft applications as required, while the variable speed trigger and electric brake provide optimum precision and control. For maximum efficiency and lifetime, the DTW1002 is equipped with a brushless motor which ensures longer runtimes and increased reliability due to the lack of friction and wear on internal components. Features & Benefits • Extra high max tightening torque • Brushless motor • Electric brake • Variable speed control by trigger • Forward/reverse rotation • Twin LED job light with afterglow • Electronic 3-stage impact power selection • Compact and lightweight design • Ergonomic handle Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium-ion • Driving Shank: 1/2" Square • Impacts per Minute: 0-1,800/2,000/2,200ipm • Max Fastening Torque Impact Drill: 300/600/1,000Nm • No Load Speed: 0-900/1,000/1,800rpm • Nut Busting Torque: 1,600Nm • Product Dimensions: 229x91x289mm • Sound Noise Uncertainty (K Factor): 3dB(A) • Sound Power Level: 108dB(A) • Sound Pressure Level: 97dB(A) • Tightening Capacity Standard Bolt: M12-M30 • Vibration Level Fastening Bolt: 18.0m/s² • Vibration Uncertainty (K Factor): 1.5m/s² • Weight: 3.3-3.6kg Contents • Makita DTW1002 18v LXT Cordless Brushless 1/2" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

Makita's CXT range expands the ever growing 12v power tool market with a selection of compact and lightweight machines which use a sliding lithium ion battery format. Utilising technology inherited from Makita's 18v range, these new batteries are equipped with overload protection circuitry and high capacity cells; fitted with multi-contact terminals to ensure stable connection even under extreme work vibration conditions, they are built for structural strength and durability and can be used in temperatures down to -20°C. The HS301D is an 85mm circular saw that benefits from CXT technology to ensure optimum power and supremely stable battery contact for smooth and effective cordless cutting performance. The bevel adjustment allows angles up to 45° with a 16.5mm depth of cut, which can be set to a maximum of 25.mm for straight cuts. An integrated blower function helps to keep the work surface free from sawdust and an external vacuum cleaner can be connected to the tool for an effective dust extraction system. Features & Benefits • Slide type Li-ion battery • Ergonomic soft grip • Blower function • Battery protection circuit • High power • Bevel cuts up to 45° • Integrated storage Specifications • Battery Voltage: 12v • Battery Type: CXT Li-ion • Blade Diameter: 85mm • Bore Diameter: 15mm • Depth of Cut @ 45°: 16.5mm • Depth of Cut @ 90°: 25.5mm • No Load Speed: 1500rpm • Noise K Factor: 3dB(A) • Noise Sound Pressure: 71dB(A) • Vibration Cutting Wood: 2.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.8kg Contents • HS301D 12v Max CXT Circular Saw • TCT Saw Blade • Hex Wrench • Dust Nozzle • No Batteries • No Charger • No Case

Makita's CXT range expands the ever growing 10.8v power tool market with a selection of compact and lightweight machines which use a sliding lithium ion battery format. Utilising technology inherited from Makita's 18v range, these new batteries are equipped with overload protection circuitry and high capacity cells; fitted with multi-contact terminals to ensure stable connection even under extreme work vibration conditions, they are built for structural strength and durability and can be used in temperatures down to -20°C. The JR103D is a higly manouevrable cordless reciprocating saw equipped with a dual trigger switch system for comfortable operation in multiple positions. It has a tool free blade clamp for quick & easy accessory changes and features an LED joblight for optimum visibility of the work area. Features & Benefits • Slide type Li-ion battery • Tool free blade clamp - Simply turn to remove the blade • Variable speed control triggers • Paddle switch on tool body and trigger switch on handle • Lock-off function • LED job light • Electric brake • Shoe Adjustment • Battery protection circuit • High power • Ergonomic handle for comfortable grip Specifications • Battery Type: Lithium-ion • Battery Voltage: 10.8v • Capacity in Wood: 50mm • Capacity in Mild Steel Pipe: 50mm • Stroke Length: 13mm • Noise Sound Pressure: 78dB(A) • Noise K Factor: 3dB(A) • No Load Speed: 0-3,300spm • Variable Speed: Either Trigger • Vibration K Factor: 1.5m/sec² • Vibration Cutting Chipboard: 8.0m/sec² • Net Weight: 1.5kg Contents • Makita JR103D 12v Max CXT Cordless Reciprocating Saw • Hex Wrench • Recip Blades (x2) • No Batteries • No Charger • No Case

The Makita SDS Max Chisel is the go-to tool for users who demand precision, power, and durability in heavy-duty demolition and masonry tasks. Designed to deliver exceptional performance, this chisel is ideal for breaking, chiselling, and channelling in a variety of tough materials. The chisel features an SDS Max shank, ensuring a secure and stable connection with a wide range of SDS Max rotary and demolition hammers. This robust fit enhances energy transfer, providing superior impact and efficiency in demanding applications. Features & Benefits • Durable construction • For use on concrete • For SDS MAX hammers Specifications • Width: 25mm • Length: 400mm • Quantity: 1