The Makita LS004G is a 260mm Cordless Brushless Slide Compound Mitre Saw powered by a 40v Max XGT Li-Ion battery. This mitre saw features a soft start for smooth start-ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load, to deliver up to 3,600 rpm. It is equipped with a D-handle for increased comfort in use, lock off 2 stage safety switch for increased operator safety and front knob for easy bevel angle adjustments. Additionally the LS004G has holders on both sides of the Saw to hold longer workpieces horizontally and a one touch sliding lock for locking the sliding movement of the carriage and a see through blade guard for increased visibility of the cutting line. Features & Benefits • Auto-Start Wireless System • Brushless motor • Constant speed control • Easy locking and release of bevel angle • Electric brake • Large turn base • LED job light • One-touch sliding lock • Rail-forward design • Soft start • Switch to start up dust extractor Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Blade Diameter: 260mm • Bore Diameter: 30mm • Max Bevel Range: 48-48° • Max Cutting Capacity: 68 x 310mm • Max Mitre Range: 60-60° • No Load Speed: 3,600 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 100 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² Contents • Makita LS004G 40v Max XGT Brushless Slide Compound Mitre Saw • TCT Saw Blade • Dust Bag • Hex Wrench • Vertical Vice • Accessory set • Wireless Unit • No Batteries • No Charger

The Makita MP001G is a Cordless Inflator powered by a 40v Max XGT Li-Ion battery. Delivers up to 1,100 kPa (161 PSI) maximum air pressure and 24 litres of air discharge per minute at 200 kPa, 12 litres per minute at 700 kPa and 7 litres per minute at 1,100 kPa. The high speed mode is suitable for Road Bikes, Cars, Trucks and Tractors. Equipped with a 65cm hose and also features a main switch with an auto power off and trigger switch. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Air Discharge Amount (at 1,100 kPa): 7 litres/min • Air Discharge Amount (at 700 kPa): 12 litres/min • Air Discharge Amount (at 200 kPa): 24 litres/min • Hose Length: 65cm • Max Air Pressure: 1,110 kPa • Noise K Factor: 3 dB(A) • Noise Sound Pressure: 71 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 3.8 m/sec² Features & Benefits • 3x inflation modes • Adapter holder • Air release function • Auto-stop function at pre-set target pressure • Digital pressure gauge • Easy-to-grip handle • High speed mode is suitable for Road Bike, Car, Truck, Tractor • LED job light • Main switch (On/off) • Protection from over-heating • Trigger switch Contents • Makita MP001G 40v Max XGT Cordless Inflator • British Adaptor • French Adaptor • Sport Ball Needle Adaptor • Swim Ring Adaptor • No Batteries • No Charger • No Case

The Makita DUS054 is a shoulder type Cordless Garden Sprayer powered by an 18v LXT Li-Ion battery to deliver up to a maximum pressure of 0.3 MPa. There is a paddle switch under the grip of spray wand which allows for easy on and off control of spraying. Mist mode is for optimal spraying close to plants and stream mode is for optimal watering and fertilizing plants. This garden sprayer features a selectable single and double head spraying. It is also environmentally friendly with no emissions and extremely low noise. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Hose length: 1.7m • Max Pressure: 0.3 MPa • Nozzle Mounting Thread: G 1/4 • Spray Wand Length: 0.5-0.7 m • Tank Capacity: 5L Features & Benefits • 3-LED fuel gauge • Environment friendly with no emission and extremely low noise • Ergonomically optimized tank design • H-shaped double head nozzle • IP54 (dust and splash water) rated protection • Lock on function • Mist and Stream modes selectable • Paddle switch under the grip of spray wand allows for easy on/off control of spraying • Single/double head spraying selectable • Telescopic spray wand Contents • Makita DUS054Z 18v LXT Cordless Garden Sprayer • H-Shaped Double Head Nozzle • Spray Wand • Spray Wand Holder • Shoulder Belt • No Batteries • No Charger

The Makita UR006G is a Cordless Brushless Brush Cutter powered by a 40v Max XGT Li-ion battery. Features a soft start for smooth start-ups, with variable speed control to allow the operator to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with a rear end mounted motor for enhanced tool balance and reverse switch for easy removal of tangled weeds and grass cuttings. Additionally, it has a tool less quick fastening handle holder, electronic current limiter, used for overload protection, and an electric brake for increased operator safety. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Cutting Diameter: 430mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 7,000 rpm • No Load Speed (Med): 5,500 rpm • No Load Speed (Lo): 4,600 rpm • Noise K Factor: 1.6 dB(A) • Noise Sound Power: 92.7 dB(A) • Noise Sound Pressure: 81.7 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Nylon Cutting Head): 2.5 m/sec² Features & Benefits • Active Feedback Sensing Technology (AFT) • Automatic Torque Drive Technology • Brushless motor • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter for overload protection • IPX4 level water resistant • New tool-less quick fastening handle holder • Offset bike handle • Reverse switch for easy removal of grass clippings stuck • Soft start feature • Variable speed control Contents • Makita UR006G 40v Max XGT Brushless Brush Cutter • Nylon Cutting Head • Accessory Bag • Hex Wrench • Box Wrench • Shoulder Belt • No Batteries • No Charger

The Makita UR008G is a Cordless Brushless Linetrimmer powered by a 40v Max XGT Li-ion battery. Features a soft start for smooth start-ups, with variable speed control to allow the operator to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with a rear end mounted motor for enhanced tool balance and reverse switch for easy removal of tangled weeds and grass cuttings. Additionally, it has a narrow protector designed exclusively for use with nylon cutting head and plastic blade. An electronic current limiter is used for overload protection and electric brake for increased operator safety. Features & Benefits • Active Feedback Sensing Technology • Automatic Torque Drive Technology • Brushless motor • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter • Ergonomically designed loop handle with rubberised soft grip • High power similar to 30cc class engine grass trimmers • IPX4 level water resistant • Narrow protector • Reverse switch • Soft start feature • Variable speed control function Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Cutting Diameter: 430mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 6,000 rpm • No Load Speed (Med): 4,600 rpm • No Load Speed (Lo): 4,000 rpm • Noise K factor: 1.6 dB(A) • Noise Sound Power: 91.9 dB(A) • Noise Sound Pressure: 79.0 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² Contents • Makita UR008G 40v Max XGT Brushless Linetrimmer • Nylon Cutting Head • Accessory Bag • Hex Wrench • Shoulder Belt • No Batteries • No Charger

The Makita UR012G is a Cordless Brushless Brush Cutter powered by two 40v XGT Li-ion batteries in series. Features a soft start for smooth start-ups, with variable speed control and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. It is equipped with electronic 3 speed settings, plus ADT mode, for high, medium and low to allow the operator to match the speed to the application. This brush cutter additionally features an electric brake for increased operator safety and electronic current limiter for overload protection. A reverse switch is used for the easy removal of grass clippings and tangled weeds and a rear end mounted motor is for optimum tool balance. Features & Benefits • Automatic Torque Drive Technology • Compatible with a variety of blades • Constant speed control • Electric brake • Electronic 3-speed (Hi/Med/Lo) • Electronic current limiter • IPX4 level water resistant • Low noise level for comfortable working • Offset bike handle • Reverse switch for removing grass clippings • Soft start • Variable speed control function Specifications • Battery Voltage: 80v (40v x2) • Battery Type: XGT Li-ion • Cutting Diameter: 480mm • Spindle Size: M10 x 1.25 Left • No Load Speed (Hi): 6,400 rpm • No Load Speed (Med): 5,000 rpm • No Load Speed (Lo): 3,500 rpm • Noise K Factor: 1.8 dB(A) • Noise Sound Power: 91.6 dB(A) • Noise Sound Pressure: 79.9 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration (Nylon Cutting Head): 2.5 m/sec² Contents • Makita UR012GZ04 Twin 40v Max XGT Cordless Brushless Brush Cutter • Nylon cutting head • Hex wrench (x2) • Box wrench • Shoulder belt • Accessory bag • No Batteries • No Charger

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 110v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 110v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 240v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 240v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The DC40RA is a fast charger for Makita 40v Max XGT Lithium ion power tool batteries. It is equipped with two cooling fans, one for the battery and the other for the charging circuit, enabling it to charge consecutive batteries at the optimum charge time. The DC40RA can also be used to charge Makta's 18v LXT lithium ion batteries if used with the ADP10 adaptor (not included). The DC40RA will fully recharge a 2.5ah 40v battery in approximately 28 minutes and will fully recharge a 4.0ah 40v battery in approximately 45 minutes. Features & Benefits • Fast charger for Makita 40v Max XGT lithium ion power tool batteries • New raised and enlarged charging indicator status light for clearer indication • Selectable melody sound for full charge notification • Two cooling fans, one for the battery and one for the charging circuit • Able to perform consecutive fast charging of batteries • Compatible with interchangeable adaptor ADP10 for charging LXT Li-ion batteries

The DC40RB is a 110V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (not included) to charge 14.4V and 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience and features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery and the other for the charging circuit and electronic current limiter for overload protection. Specifications • 45 minutes to charge BL4040 40V Max 4.0 Ah • 28 minutes to charge BL4025 40V Max 2.5 Ah • 22 minutes to charge BL1830B • 29 minutes to charge BL1840B • 35 minutes to charge BL1850B • 50 minutes to charge BL1860B Features & Benefits • Twin port fast charger for charging battery ranges from 14.4V LXT to 40V Max XGT • Able to charge two Makita 40V Max Li-ion XGT batteries at the same time • Equipped with two cooling fans, one for battery and other for charging circuit • Able to perform consecutive fast charges of batteries for increased convenience • Large charging status indicator light • Electronic current limiter for overload protection

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 110v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 110v

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 240v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5Ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 240v