The DHP484 is a 2 speed brushless LXT machine with all metal gears and gear housing, an electric brake and an LED worklight. It has a hammer setting for drilling into masonry and concrete as well as a standard rotary mode for driving screws and drilling into materials like wood, metal or plastic. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • No Load Speed (Hi): 0 - 2,000 rpm • No Load Speed (Lo): 0 - 500 rpm • Blows per Minute (Hi): 0 - 30,000 ipm • Blows per Minute (Lo): 0 - 7,500 ipm • Torque Settings: 21 + drill • Max. Fastening Torque (Soft Joint): 30 Nm • Max. Fastening Torque (Hard Joint): 54 N • Chuck Capacity: 1.5 - 13mm • Capacity in Steel: 13mm • Capacity in Wood: 38mm • Capacity in Masonry: 13mm Features and Benefits • Brushless motor • Electric brake • 2 mechanical gears. • Variable speed control by trigger • Forward/reverse rotation • LED job light • Compact Overall Length of 182mm • Keyless Chuck • Aluminium Gear Housing • All metal gear construction • Ergonomic soft grip • Belt clip Contents • DHP484 18v Cordless Combi Drill • 2x 5ah Batteries • DC18RC Compact Battery Charger • Makpac Inlay • Type 2 Makpac Case

The DRT50 is powered by an 18v Li-ion battery from Makita's LXT series, which is mounted on the top of the machine for optimum balance and control. Like the RT0700C, the tool has an aluminium housing and base, contributing to an overall weight of 2.1kg for easy handling. It is equipped with a variable speed control dial (10,000 – 30,000) RPM) to suit the speed of the required application, as well as electronic speed control to maintain constant speed under load and a soft start circuit for smoother start-ups. The DRT50 is equiped with an efficient Brushless Motor for up to 50% longer run time, increased power, and speed, as well as longer over all tool life. Features & Benefits • Brushless motor • Soft start • Variable speed control dial • Constant speed control • LED job light • Push button with lock on/off • Connectable to dust extractor • Aluminium base • Aluminium housing • Shaft lock Specifications • Voltage: 18v • Battery Type: Lithium-ion • Collet Capacity: 3/8" and 1/4" • Noise Sound Pressure: 78 dB(A) • Noise K Factor: 3 dB(A) • Plunge Capacity (Trimmer): 0-40mm • Plunge Capacity (Plunge): 0-35mm • No Load Speed: 10,000-30,000rpm • Vibration K Factor: 1.5m/sec² • Vibration Cutting MDF: 4.5m/sec² • Vibration: 2.5m/sec² • Net Weight: 2.1kg Contents • DRT50 18v LXT Router Trimmer • Trimmer Base • Straight Guide • Dust Nozzle for Trimmer Base • Hex Wrench x2 • Collet Cone • Template Guide for Trimmer • Trimmer Guide • Plunge Base • Tilt Base • Offset Base • Dust Nozzle for Plunge Base • Grip 36 • Template Guide for Plunge Base • Grip Attachment • Guide Holder • No Batteries • No Charger • Makpac Type 4 Case

The DRT50 is powered by an 18v Li-ion battery from Makita's LXT series, which is mounted on the top of the machine for optimum balance and control. Like the RT0700C, the tool has an aluminium housing and base, contributing to an overall weight of 2.1kg for easy handling. It is equipped with a variable speed control dial (10,000 – 30,000) RPM) to suit the speed of the required application, as well as electronic speed control to maintain constant speed under load and a soft start circuit for smoother start-ups. The DRT50 is equiped with an efficient Brushless Motor for up to 50% longer run time, increased power, and speed, as well as longer over all tool life. Features & Benefits • Brushless motor • Soft start • Variable speed control dial • Constant speed control • LED job light • Push button with lock on/off • Connectable to dust extractor • Aluminium base for higher durability and accuracy • Aluminium housing • Shaft lock Specifications • Voltage: 18v • Battery Type: Lithium-ion • Collet Capacity: 3/8" and 1/4" • Noise Sound Pressure: 78 dB(A) • Noise K Factor: 3 dB(A) • Plunge Capacity (Trimmer): 0-40mm • Plunge Capacity (Plunge): 0-35mm • No Load Speed: 10,000-30,000rpm • Vibration K Factor: 1.5m/sec² • Vibration Cutting MDF: 4.5m/sec² • Vibration: 2.5m/sec² • Net Weight: 2.1kg Contents • Makita DRT50 18v LXT Cordless Brushless Router Trimmer • Trimmer Base • Straight Guide • Dust Nozzle for Trimmer Base • Hex Wrench x2 • Collet Cone • Template Guide for Trimmer • No Batteries • No Charger • Makpac Type 4 Case

The Makita DHR171 is designed for ease of use with a one touch sliding chuck and variable speed control. This 17mm cordless rotary hammer drill will drill through concrete up to 17mm, steel up to 10mm and wood up to 13mm. The brushless motor is precision engineered to be up to 50% more efficient than a comparative model. This means a fully charged 18v lithium-ion battery will last almost twice as long as a product running on a standard motor. With its compact design and vibration absorbing housing the DHR171 is lightweight at only 2.8kg net and being powered by an 18v LXT Li-ion battery means the DHR171 is cross compatible with the entire Makita LXT battery range. Features & Benefits • Brushless motor • One touch sliding chuck for easy bit installation and removal. • 2-mode operation: Rotary only and Rotary hammer • Electric brake • Variable speed control by trigger • Constant speed control • Forward/reverse rotation • LED job light • Compact and lightweight design • Vibration absorbing housing Specifications • Battery Type: Lithium-ion • Voltage: 18v • Capacity in Concrete: 17mm • Capacity in Steel: 10mm • Capacity in Wood: 13mm • Impact energy: 1.2J • Shank: SDS Plus • Impacts per Minute: 0-4,800ipm • Noise sound pressure: 86dB(A) • Noise sound power: 97dB(A) • Noise K factor: 3dB(A) • No Load Speed: 0-680rpm • Vibration K factor: 1.5m/sec² • Vibration: Hammer Drilling: 9.0m/sec² • Vibration: Drilling into metal: 2.5m/sec² • Net weight: 2.8kg Contents • Makita DHR171RTJ 18v LXT Cordless Brushless SDS Hammer Drill • No Batteries • No Charger • No Case • Side Handle • Depth Stop

A two piece brushless combi-drill and impact driver kit, the CLX205AJ twin pack is part of the Makita 12v CXT range and includes a HP332D combi drill and aTD111D impact driver. The HP331 combi drill has a 10mm keyless chuck and two speed gearbox while the TD111D impact driver features a new impact mode which will drive fasteners at a low speed until the start of the tightening phase, preventing the age-old issue of damaging screw heads. Both machines are lightweight and compact, with brushless motors, electric brakes and LED worklights for increased visibility in dark workspaces and dimly lit jobsite environments. Features and Benefits • Combi drill and Impact driver kit for drilling and driving into a range of materials • Part of the Makita 12v CXT range • Compact and lightweight; ideal for working at height and in tight spaces • Brushless motors for maximum efficiency and longer runtimes • Ergonomic softgrip construction for increased comfort • Belt hooks for hands free portability • LED worklights for increased visibility in dark environments • TD111D Impact Driver features new A-mode impact setting Contents • Makita HP332 12v Cordless CXT Brushless Combi Drill • Makita TD111D 12v Cordless CXT Brushless Impact Driver • Makita DC10WC 12V Li-ion Battery Charger • Makita BL1020B 12V Cordless Li-ion Battery 2ah x 2 • Makita Connector Stackable Power Tool Case

Suitable for cutting a range of materials including cardboard, carpet, vinyl and lino flooring, artificial grass, roofing felt, fibre-glass rendering mesh, damp-proof course, weed control membrane, tarpaulin, pallet strapping, wire mesh and more, the CP100D is a versatile and compact multi cutter that adittionally benefits from an auto sharpening system. Each rotation of the blade brings it into contact with an integrated sharpener that helps keep the cutter in prime condition even over repeated use. Specifications • Voltage: 10.8 v • Cutting Capacity: 6 mm • Noise sound pressure: 70 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 300 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 0.88 kg Features and Benefits • Compact size for manoeuvrability • Ergonomic soft grip • Lock-off button for safe operation • Auto self-sharpening function Contents • CP100DSM 10.8v CXT Cordless Multi Cutter • 1x BL1040B (4ah) Battery • Fast Charger • Tool Bag

Suitable for cutting a range of materials including cardboard, carpet, vinyl and lino flooring, artificial grass, roofing felt, fibre-glass rendering mesh, damp-proof course, weed control membrane, tarpaulin, pallet strapping, wire mesh and more, the CP100D is a versatile and compact multi cutter that adittionally benefits from an auto sharpening system. Each rotation of the blade brings it into contact with an integrated sharpener that helps keep the cutter in prime condition even over repeated use. Specifications • Voltage: 10.8 v • Cutting Capacity: 6 mm • Noise sound pressure: 70 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 300 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 0.88 kg Features and Benefits • Compact size for manoeuvrability • Ergonomic soft grip • Lock-off button for safe operation • Auto self-sharpening function Contents • CP100DZ 10.8v CXT Cordless Multi Cutter only • No Battery • No Charger • No Case

The PT354D is a cordless pin nailer which runs on lithium batteries from Makita's 10.8v CXT platform. Specifications • Battery Type: Lithium-ion • Voltage: 10.8 v • Nail gauge: 23 Ga • Nail Length: 15, 18, 25, 30, 35 mm • Magazine Capacity: 100 • Noise sound pressure: 76 dB(A) • Noise K factor: 3 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 2.0 kg Features and Benefits • Depth adjustment • Anti Dry-Fire Mechanism • Trigger lock • LED job light • Low reaction force mechanism enables easier nailing of long pins • Ergonomic soft grip • Belt clip • Nose tip designed for quick and easy access to desired firing point on workpiece • Contact Arm Mechanism Contents • PT354DZ 10.8v Cordless Nailer • Safety Goggles • Belt Clip • Nose Adaptor • Allen Key • No Battery • No Charger • No Case