The LS1219L is a Sliding Compound Mitre Saw which is fitted with a 305mm blade. The motor head slides on fixed pipes without extending to the rear of the machine, allowing the LS1219L to be placed close to the wall. The LS1219L is the same as the LS1219 except the 'L' model has an additional laser guide for rapid setups. Specifications • Blade Diameter: 305mm • Max mitre range: 60 - 60 º • Max mitre cut at 90º: 92 x 382 mm • Bore Diameter: 30mm • Max bevel range: 48 - 48 º • Noise sound pressure: 91 dB(A) • Noise sound power: 100 dB(A) • Noise K factor: 3 dB(A) • Input Wattage (110v): 1,450 w • No Load Speed: 3200 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 29.5 kg Features and Benefits • Built in laser guide • Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall • Front knob for easy bevel adjustment • Holders to support a wide workpiece • Easy-to-operate mitre angle lock • One-touch sliding lock • Large turn base • Connects to dust extractor • Electric brake • Soft start • Constant speed control • Double Insulated Contents • LS1219L 110v Sliding Compound Mitre Saw • TCT saw blade • Dust bag • Triangular rule • Vertical vice • Hex wrench

Makita's LS1219 is a sliding compound mitre saw with a 305mm blade. The motor head slides on fixed pipes without extending to the rear of the saw, allowing the machine to be placed close to the wall. Specifications • Blade Diameter: 305mm • Max mitre range: 60 - 60 ° • Max mitre cut at 90°: 92 x 382 mm • Bore Diameter: 30 mm • Max bevel range: 48 - 48° • Noise sound pressure: 91 dB(A) • Noise sound power: 100 dB(A) • Noise K factor: 3 dB(A) • Input Wattage (240v): 1,800 w • No Load Speed: 3200 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 29.3 kg Features and Benefits • Motor head slides on fixed pipes without extending machine at rear end • Machine can be placed close to walls and other obstacles • Front knob for easy bevel adjustment • Holders to support a wide workpiece • Easy-to-operate mitre angle lock • One-touch sliding lock • Large turn base • Can be connected to dust extractor • Electric brake • Soft start • Constant speed control • Double Insulated Contents • LS1219 240v mitre saw • TCT saw blade • Dust bag • Triangular rule • Vertical vice • Hex wrench

Makita's LS1219 is a sliding compound mitre saw with a 305mm blade. The motor head slides on fixed pipes without extending to the rear of the saw, allowing the machine to be placed close to the wall. Specifications • Blade Diameter: 305mm • Max mitre range: 60 - 60 ° • Max mitre cut at 90°: 92 x 382 mm • Bore Diameter: 30 mm • Max bevel range: 48 - 48° • Noise sound pressure: 91 dB(A) • Noise sound power: 100 dB(A) • Noise K factor: 3 dB(A) • Input Wattage (110v): 1,450 w • No Load Speed: 3200 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 29.3 kg Features and Benefits • Motor head slides on fixed pipes without extending machine at rear end • Machine can be placed close to walls and other obstacles • Front knob for easy bevel adjustment • Holders to support a wide workpiece • Easy-to-operate mitre angle lock • One-touch sliding lock • Large turn base • Can be connected to dust extractor • Electric brake • Soft start • Constant speed control • Double Insulated Contents • LS1219 110v mitre saw • TCT saw blade • Dust bag • Triangular rule • Vertical vice • Hex wrench

Makita's DTW180 is a 3/8" square drive impact wrench which is powered by lithium ion power tool batteries from the 18v LXT cordless platform. One of its distinguishing features is a reverse rotation auto stop mode. This mode works only when pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds. Features and Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Ergonomic soft grip • Reverse rotation auto stop mode brakes tool rapidly in 0.2 seconds • 2-stage impact power selection • Compact & lightweight Specifications • Battery Type: Makita LXT Lithium-ion • Battery Voltage: 18v • Nut Busting Torque: 310 Nm • Drive Shank: 3/8" Square • Blows per Minute (Hi): 0 - 3,600 ipm • Blows per Minute (Lo): 0 - 2,000 ipm • Standard Bolt: M8-M16 • High Tensile Bolt: M6-M12 • Noise Sound Pressure: 89 dB(A) • Noise Sound Power: 100 dB(A) • Noise K Factor: 3 dB(A) • No Load Speed (Hi): 0 - 2,400 rpm • No Load Speed (Lo): 0 - 1,300 rpm • Max Fastening Torque: 180 Nm • Vibration: Fastening Bolt: 9.0 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 1.2-1.5 kg Contents • Makita DTW180 18v LXT Cordless Brushless 3/8" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

The DTR180ZK enables fast and efficient application of rebar tie wire, reducing the need for GC07 Hot-work permits and reliance on manual labour. The DTR180ZK delivers double loop ties at the press of a button and is ideal for time consuming construction tasks like laying concrete foundations over a wide area. It can be used one handed in either single or continuous mode, leaving the other hand free to adjust the position of the rebar. The tool is suitable for use with D10, D13 and D16 rebar in varying combinations of 2, 3 and 4 pieces. In continuous mode the operator can make multiple ties simply by pushing the contact arm against the workpieces while holding the trigger down. According to the condition of the tying material, the tying strength can be adjusted in six stages. Using a 5.0ah 18v battery, up to 120 ties of 0.8mm diameter annealed wire can be accomplished. The DTR180ZK does not produce heat or sparks, therefore operators do not need a GC07 permit to use it. Features & Benefits • Enables automatic & time saving rebar tying • Brushless • Onboard storage for hex key • Ergonomic softgrip handle • Single handed operation • Single or continuous operation modes • Tie wire reel replaced by opening the reel cover • Six stage tying strength adjustment Specifications • Battery Voltage: 14.4v/18v • Battery Type: Makita Li-ion • Tie Wire: 0.8mm • Applicable Rebar: D10 x D10 - (D13 x2) x (D13 x2) • Approximate Ties per Reel: 120 (with BL1850B Battery) • Net weight: 2.3-2.6kg • Vibration no load: 2.5m/sec² • Vibration K factor: 1.5m/sec² • Noise sound pressure: 78dB(A) • Noise K factor: 3dB(A) Contents • DTR180ZK Cordless Rebar Tying Tool • Hex Key • Belt Clip • Carry Case • No Battery • No Charger

The Makita DHS661 is a 165mm cordless circular saw with an Auto-start Wireless System (AWS) which can connect to compatible dust extractors via Bluetooth for synchronized operation; the extractor will start up and shut down when the trigger is held down or released. The DHS661 also has an integrated blower for clearing dust off the cutting line while the machine is in operation. Additional benefits include an Automatic Torque Drive Technology system which regulates the cutting speed according to load conditions for optimum operation. Lights on the tool indicate if it is experiencing high speed, high torque, or overload. Features & Benefits • Aluminium base with 45 and 50 degrees bevel cutting capacity • Automatic Torque Drive Technology • Auto Start Wireless System • Blower function • Brushless motor • Compact and lightweight design • Easy to read scale markings • Electric brake • Improved visibility of blade tip • Indication lamp for ADT • LED job light • Lock off button for safe operation • Rear facing exhaust port • Soft start Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade Diameter: 165mm • Bore Diameter: 20mm • Max Cut at 0°: 57mm • Max Cut at 45°: 41mm • Max Cut at 50°: 37mm • No Load Speed: 5,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 104dB(A) • Noise Sound Pressure: 93dB(A) • Vibration (Cutting Wood): 2.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 2.9-3.2kg Contents • Makita DHS661 18v LXT Cordless Brushless AWS Circular Saw • TCT Saw Blade • Hex Wrench • Guide Rule • Dust Nozzle • Wireless Unit • No Batteries • No Charger • No Case

The Makita DHS660 Part of the LXT range of cordless tools, is a 165mm (6-1/2") circular saw which is powered by an 18v Lithium Ion battery. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade Diameter: 165mm • Max Cut @ 0º: 57mm • Max Cut @ 45º: 41mm • Max Cut @ 50º: 37mm • Bore Diameter: 20mm • Noise sound pressure: 93 dB(A) • Noise sound power: 104 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 5,000 rpm • Vibration K factor: 1.5 m/sec² • Vibration (Cutting Wood): 2.5 m/sec² • Net weight: 2.9 - 3.2 kg Features and Benefits • Electric brake • Soft start • LED job light • Aluminium base with 45° and 50° bevel cutting capacity • Compact and lightweight design • Rear-facing exhaust port • Lock-off button for safe operation • Blower keeps sawdust off the cut line • ADT system automatically changes cutting speed according to load conditions • Indicator light for high speed, high torque or overload • Improved visibility of blade tip • Easy-to-read scale markings Contents • DHS660RTJ 18v Circular Saw • TCT Saw Blade • Hex Key • Rip Fence • Dust Nozzle • No Battery • No Battery Charger

With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the DHR400ZKU can also be with the trigger controlling chiselling for intermittent work. The DHR400ZKU also benefits from Makita Auto-Start Wireless System functionality which allows the tool to automatically connect to compatible Makita dust extractors. Each machine has a unique chip that allows the user to pair it up with the selected dust extractor. This machine also has a Soft Start feature which smoothly accelerates the motor into action. In drilling mode this reduces the sudden torque load on start up. When operating, the torque limiter connected to the side handle will cut the motor drive should the drill bit snag. The soft no load function automatically cuts the motor speed during idling to reduce vibration exposure. Features & Benefits • Auto-Start Wireless System • Connects to compatible Bluetooth dust extractors • Brushless motor for increased runtime • Variable speed • Electric brake • Soft start • Constant speed control • Torque limiter • LED job light • Soft No Load • 2 mode operation Specifications • Battery Voltage: 36v (2x 18v) • Battery Type: Makita LXT Li-on • Max in concrete (TCT bit/core): 40/105mm • Impact energy: 8.0J • Shank: SDS-MAX • Blows per minute: 1450-2900bpm • Noise sound pressure/power: 91/102dB(A) • Noise K factor: 3dB(A) • No Load Speed: 250-500rpm • Vibration K factor: 1.5m/sec² • Vibration (Hammer Drilling/Chiselling): 5.0/4.5 m/sec² • Net weight: 7.3-8.1kg Contents • DHR400ZKU SDS Max Rotary Demolition Hammer • Side Handle • Depth Stop • Bit Grease • Cloth • Wireless Unit • Carry Case • No Batteries • No Charger