The Makita DTW300 Brushless LXT 1/2" Impact Wrench is ideal for automotive, installation and fabrication trades. Combining extended run time and speed control for unmatched fastening performance. It is powered by a Makita built brushless motor for longer run time. Precise fastening control is achieved through the 4 speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto stop modes offer increased efficiency when the fastener is adequately loosened. The full speed mode function reduces the trigger pull to reach full speed. Features & Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Electronic 4 stage impact power selection • Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button • Auto stop system available both in forward/reverse rotation modes Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Blows per Minute (Max/Hi/Med/Lo): 0-4,000/3,400/2,600,1,800ipm • Driving Shank: 1/2" Square • High Tensile Bolt: M10-M16 • Max. Fastening Torque: 330Nm • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 108dB(A) • Noise Sound Pressure: 97dB(A) • Nut Busting Torque: 580Nm • Standard Bolt: M10-M20 • Vibration Fastening Bolt: 12.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.5-1.8kg Contents • DTW300 18v LXT Cordless Brushless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

The DX12 is a dust extraction attachment for the Makita HR003 40v XGT cordless SDS Plus rotary hammer drill. Suitable for use with drill bits of up to 260mm in length, the DX12 has an interchangeble HEPA filter which traps 99.9% of particulates 0.3 microns or larger. It captures dust at the work area without needing to connect up an external dust extractor.

The DX14 is a dust extraction attachment for the Makita HR004 40v XGT cordless SDS Plus rotary hammer drill. Powered by the same battery used to power the tool, it enables the operator to extract dust straight from the work area without having to connect up an external dust extractor.

The Makita ADP10 has been developed for use with the DC40RA charger and enables it to charge 18v LXT Li-Ion batteries. The charging performance is as high as that of DC18RC. Please note the ADP10 is not compatible with the following productss: • Ni-MH batteries • BL1430A • ADP01 • ADP02 • ADP03 • ADP04 • BTC01 • BTC02 • BTC03

The DC40RA is a fast charger for Makita 40v Max XGT Lithium ion power tool batteries. It is equipped with two cooling fans, one for the battery and the other for the charging circuit, enabling it to charge consecutive batteries at the optimum charge time. The DC40RA can also be used to charge Makta's 18v LXT lithium ion batteries if used with the ADP10 adaptor (not included). The DC40RA will fully recharge a 2.5ah 40v battery in approximately 28 minutes and will fully recharge a 4.0ah 40v battery in approximately 45 minutes. Features & Benefits • Fast charger for Makita 40v Max XGT lithium ion power tool batteries • New raised and enlarged charging indicator status light for clearer indication • Selectable melody sound for full charge notification • Two cooling fans, one for the battery and one for the charging circuit • Able to perform consecutive fast charging of batteries • Compatible with interchangeable adaptor ADP10 for charging LXT Li-ion batteries

A complete battery and charger starter kit for Makita's 40v XGT cordless power tool range, the 191K01-6 Power Source pack contains a 40v battery charger and two 4.0ah XGT batteries along with a Makpak type 1 stackable case for transport and storage. Makita's 40v XGT range was introduced in 2020 as a powerful, heavy duty cordless platform with an all-new battery system. XGT batteries are encased in heavy duty housings with impact absorbing padding, and can be fully recharged in rapid time (as little as 28 minutes). Two way digital communication between tool and battery ensures optimum performance and reliability at all times, while allowing for future updates to be implemented into the range if necessary. This new platform is not intended as a replacement for the industry standard 18v LXT range, and has been designed to work alongside it: the ADP10 charging adaptor means you can recharge all your LXT and XGT batteries from the same charger to eliminate clutter on site. Makpak cases can be stacked and connected to other cases in the same range, as well as many other Systainer type carry cases from other manufacturers. Features & Benefits • XGT battery and charger starter kit • Contains 4.0ah batteries, charger and Makpak carry case • Greatly increased water and drop impact resistance • Digital communication between the battery and the tool and battery and the charger • Battery fuel gauge: 4 LED gauge with a check button • Cooling system for maximum battery life Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Battery Capacity: 4.0ah • Battery Quantity: 2 Contents • Makita BL4040 40v Max XGT Cordless Li-ion 4ah Battery (x2) • Makita DC40RA 40v Max XGT Battery Fast Charger • Makita MakPac Type 1 Connector Case

Makita's BL4040 is a 4.0ah lithium ion battery which is suitable for use with the 40v Max XGT range of cordless power tools. Features & Benefits • Greatly increased water and drop impact resistance • Digital communication between the battery and the tool • Digital communication between the battery and the charger • Battery fuel gauge: 4 LED gauge with a check button • Cooling system for maximum battery life Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Battery Capacity: 4.0ah

Makita's BL4025 is a 2.5ah lithium ion battery which is suitable for use with the 40v Max XGT range of cordless power tools. Features & Benefits • Greatly increased water and drop impact resistance • Digital communication between the battery and the tool • Digital communication between the battery and the charger • Battery fuel gauge: 4 LED gauge with a check button • Cooling system for maximum battery life Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Battery Capacity: 2.5ah