The Makita GA9070X1 is a straight handle 230mm diameter Paddle Switch Angle Grinder. It features a soft start for smooth start ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load to deliver up to 6,600 rpm. It is equipped with mechanical brake, rotatable vibration absorbing main handle that can be positioned to suit most cutting and grinding applications, anti vibration housing and 3 position vibration absorbing side grip. Specifications • Voltage: 240v • Bore Diameter: 22.23 mm • Input Wattage: 2,800 w • Max Wheel Diameter: 230 mm • Max Wheel Thickness: 6.5 mm • No Load Speed: 6,600 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 102 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration (Disc Sanding): 2.5 m/sec² • Vibration (Surface Grinding with Anti-Vibration Side Grip): 4.8 m/sec² • Vibration (Surface Grinding): 4.9 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 6.3 - 8.5 kg Features & Benefits • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti restart function • Anti vibration housing for reduced vibration levels • Constant speed control • Double Insulation • Mechanical Brake • Redesigned shaft lock • Rotatable main handle • Straight handle type • Torque limiter Contents • Makita GA9070X1 Paddle Switch Angle Grinder 240v • Lock Nut Wrench • Anti Vibration Side Grip

The Makita GA9070X1 is a straight handle 230mm diameter Paddle Switch Angle Grinder. It features a soft start for smooth start ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load to deliver up to 6,600 rpm. It is equipped with mechanical brake, rotatable vibration absorbing main handle that can be positioned to suit most cutting and grinding applications, anti vibration housing and 3 position vibration absorbing side grip. Specifications • Voltage: 110v • Bore Diameter: 22.23 mm • Input Wattage: 2,200 w • Max Wheel Diameter: 230 mm • Max Wheel Thickness: 6.5 mm • No Load Speed: 6,600 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 102 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration (Disc Sanding): 2.5 m/sec² • Vibration (Surface Grinding with Anti-Vibration Side Grip): 4.8 m/sec² • Vibration (Surface Grinding): 4.9 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 6.3 - 8.5 kg Features & Benefits • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti restart function • Anti vibration housing for reduced vibration levels • Constant speed control • Double Insulation • Mechanical Brake • Redesigned shaft lock • Rotatable main handle • Straight handle type • Torque limiter Contents • Makita GA9070X1 Paddle Switch Angle Grinder 110v • Lock Nut Wrench • Anti Vibration Side Grip

The Makita GA7071X1 is a 180mm diameter Paddle Switch Angle Grinder with a D handle designed to protect the user’s hand from materials. It features a soft start for smooth start ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load to deliver up to 8,500 rpm. It is equipped with mechanical brake, rotatable vibration absorbing main handle that can be positioned to suit most cutting and grinding applications, anti vibration housing and 3 position vibration absorbing side grip. Specifications • Voltage: 240v • Bore Diameter: 22.23 mm • Input Wattage: 2,800 w • Max Wheel Diameter: 180 mm • Max Wheel Thickness: 7.2 mm • No Load Speed: 8,500 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 102 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration (Disc Sanding): 3.4 m/sec² • Vibration (Surface Grinding with Anti-Vibration Side Grip): 5.3 m/sec² • Vibration (Surface Grinding): 5.1 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 6.2 - 6.7 kg Features & Benefits • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti restart function • Anti vibration housing for reduced vibration levels • Constant speed control • D shaped handle type • Double Insulation • Mechanical Brake • Redesigned shaft lock • Rotatable main handle • Soft start • Torque limiter Contents • Makita GA7071X1 Paddle Switch Angle Grinder 240v • Lock Nut Wrench • Anti Vibration Side Grip

The UH014G is a lightweight and low noise, brushless Hedge Trimmer powered by a 40v Max Li-ion XGT slide type battery. It features 3 electronic speed control settings for optimum speed control and constant speed control to automatically apply additional power to the motor for constant speed under load. It is equipped with a 750mm single sided blade, with new triple edged cutting teeth, designed to easily catch, firmly hold and sharply cut twigs or thin branches up to a maximum 23.5mm diameter. Specifications • Battery Voltage: 40v Max • Battery Type: Makita XGT Lithium Ion • Blade Length: 750mm • Blade Type: Single Sided • Max Branch Diameter: 23.5mm • Noise K Factor: 3 dB(A) • Noise Sound Power: 92 dB(A) • Noise Sound Pressure: 81 dB(A) • Strokes per Minute: 2,000/3,600/5,000 spm • Vibration (Front grip): 3.2m/sec² • Vibration (Rear grip): 2.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 4.0-4.7kg Features & Benefits • Automatic off function if it is not operated for 60 seconds after being turned on • Brushless motor • Chip receiver • Constant speed control • Curved blades reduce friction resistance to suppress energy loss • Due to the low resistance run time is increased • Electric brake • Ergonomic front handle • Increased cutting speed and torque for smooth and efficient cutting • IPX4 level water resistant • Lightweight • Lock off switch • Low noise • New triple edged cutting teeth are designed to easily catch and firmly hold branches • Reverse button • Two handed start up for user protection • Variable speed control Contents • UH014G 40v Max XGT Cordless Brushless Hedge Trimmer • Blade Cover • Chip Receiver • No Batteries • No Charger

The UH013G is a lightweight and low noise, brushless Hedge Trimmer powered by a 40v Max Li-ion XGT slide type battery. It features 3 electronic speed control settings for optimum speed control and constant speed control to automatically apply additional power to the motor for constant speed under load. It is equipped with a 600mm single sided blade, with new triple edged cutting teeth, designed to easily catch, firmly hold and sharply cut twigs or thin branches up to a maximum 23.5mm diameter. Specifications • Battery Voltage: 40v Max • Battery Type: Makita XGT Lithium Ion • Blade Length: 600 mm • Blade Type: Single Sided • Max Branch Diameter: 23.5 mm • Noise K Factor: 3 dB(A) • Noise Sound Power: 91 dB(A) • Noise Sound Pressure: 80 dB(A) • Strokes per Minute: 2,000 / 3,600 / 5,000 spm • Vibration (Front grip): 2.5 m/sec² • Vibration (Rear grip): 2.5 m/sec² • Vibration K Factor: 1.5 m/sec² • Net Weight: 3.9 - 4.5 kg Features & Benefits • Automatic off function if it is not operated for 60 seconds after being turned on • Brushless motor • Chip receiver • Constant speed control • Curved blades reduce friction resistance to suppress energy loss • Due to the low resistance run time is increased • Electric brake • Ergonomic front handle • Increased cutting speed and torque for smooth and efficient cutting • IPX4 level water resistant • Lightweight • Lock off switch • Low noise • New triple edged cutting teeth are designed to easily catch and firmly hold branches • Reverse button • Two handed start up for user protection • Variable speed control Contents • UH013G XGT Cordless Brushless Hedge Trimmer • Blade Cover • Chip Receiver • No Batteries • No Charger

The DUA301 is a Telescopic Pole Saw, with a 300mm length bar, powered by two 18v Li-ion LXT slide type batteries, to supply energy to the powerful brushless 36v motor. It features a soft start for smooth start ups and variable speed controlled by trigger to enable the user to match the speed to the application. The motor is located in the battery housing and so reducing the saw head weight, allowing for easier control of the saw head, reducing user fatigue. The overall length without guide bar of the tool is adjustable from approx 2.6m to 3.8m. Features & Benefits • Captive nuts prevent loss of nut when removing sprocket cover • Chain oil tank with high transparency allows to easily check the amount of remaining oil • Designed to provide high performance similar to 30ml class engine pole saws • Electric brake • Excellent tool balance • High operating efficiency • Integrated branch hook • Retractable oil tank cap decreases the chance that the saw head will snag • Slim saw head • Soft start • Tool less pole extension and fixing for easy adjustment of pole length • Torque boost mode • Variable speed control Specifications • Battery Voltage: 36v (18v x2) • Battery Type: Makita LXT Lithium Ion • Bar Size: 300mm • Chain Gauge: 0.050" • Chain Oil Capacity: 160ml (cm³) • Chain Pitch: 3/8" • Chain Speed: 0-20m/sec • Noise K Factor: 3 dB(A) • Noise Sound Power: 103 dB(A) • Noise Sound Pressure: 92 dB(A) • Vibration K Factor: 1.5m/sec² • Net Weight: 7.8-8.5kg Contents • DUA301 Cordless Telescopic Pole Saw • Saw Chain • Hex Wrench • Wrench • Band Assembly • Guide Bar • Guide Bar Cover • Round File • Oil Supply • No Batteries • No Charger

The SP001G is a 165mm brushless Plunge Saw, powered by a 40v Max Li-ion XGT slide type battery. It features soft start for smooth start ups, variable speed controlled by dial to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. The SP001G is equipped with easy to set depth adjustments, depth stopper for scuffing to enable the user to cut a preliminary groove at a depth of 2mm and positive stops at the most commonly used bevel angles. It also has dual front and rear bevel supports for increased rigidity for precise and accurate bevel cuts and a locking lever to hold the blade in position so that the wrench can be used through the hole in the blade case. Features & Benefits • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Bevel capacity: 1° to 48° • Brushless motor • Constant speed control • Depth stopper for splinter free cutting • Electric brake • Guide rail (option) is attachable without adapter • Positive stops at commonly used bevel angles (22.5°, 45°) • Rotatable dust nozzle • Soft start • The dust extractor automatically runs while the switch is on • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blade Diameter: 165mm • Bore: 20mm • Max. Cut at 0°: 56mm • Max. Cut at 45°: 40mm • Max. Cut at 48°: 38mm • No Load Speed: 4,900rpm • Noise K Factor: 3 dB(A) • Noise Sound Power/Pressure: 100/89dB(A) • Vibration K Factor: 1.5m/sec² Contents • SP001G Brushless Plunge Saw • Wireless Unit • TCT Saw Blade • Hex Wrench • Tool Bag • No Batteries • No Charger • No Case

The HR007G is a brushless Rotary Hammer, adapted for SDS Plus bits, powered by a 40v Max Li-ion XGT slide type battery. It features variable speed controlled by trigger to enable the user to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load. Features & Benefits • 3 mode operation: Rotation only, Rotation + Hammering, Hammering only • Active Feedback Sensing Technology shuts down tool if rotation speed suddenly slows down • Anti vibration housing and AVT for reduced operator fatigue • Auto Start Wireless System connects to compatible dust extractors with bluetooth • Brushless motor • Constant speed control • Electric brake • Electric brake • LED job light • Reversing switch • The dust extractor automatically runs while the switch is on • Torque limiter • Trigger lock • Variable speed Specifications • Battery Voltage: 40v Max • Battery Type: XGT Lithium Ion • Blows per Minute: 0-5,000bpm • Impact Energy: 3.0j • Max. Diameter in Concrete (Diamond Core): 65mm • Max. Diameter in Concrete (TCT Bit): 54mm • Max. Diameter in Steel: 13mm • Max. Diameter in Wood: 32mm • No Load Speed: 0-980rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 105 dB(A) • Noise Sound Pressure: 94 dB(A) • Shank: SDS Plus • Vibration (Chiselling): 8.6m/sec² • Vibration (Drilling into Metal): 2.8m/sec² • Vibration (Hammer Drilling): 7.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.8-4.8kg Contents • HR007G 40v Max XGT Cordless SDS Plus Rotary Hammer Drill • Cloth • Grease Vessel • Depth Gauge • Air Duct Cap • No Batteries • No Charger • No Case